COMPOUND PLATINUM Series User manual

SKU: CPL-PFR-1081
ASSEMBLY INSTRUCTIONS
PEC FLY / REAR DELT MACHINE
PLATINUM SERIES
COMPOUND.
FITNESS EQUIPMENT
CAUTION: Read all precautions and instructions before
using this equipment. Save this manual for future reference.
OWNER’S MANUAL
CAUTION: Read all precautions and instructions before using
this equipment. Save this manual for future reference.
DM-1081

01
CONTENTS
02 General warnings and maintenance advice
09-30 Assembly Instructions
Explained as a series of steps,with each step containing:
Pictures,descriptions and quantities of the parts required
Notes
Diagram showing how the parts fit together
tsiL traP 11- 10




Assembly Instructions
02
This exercise equipment is built for optimum safety. Be sure to read the entire
manual before you assemble or operate your equipment. Please note the
following safety precautions:
1. Keep children and pets away from the equipment at all times. Do not leave
children unattended in the same room with the equipment.
2. Only one person at a time should use the equipment.
3. If the user experiences dizziness, nausea, chest pain, or any other abnormal
symptoms STOP the workout at once CONSULT A PHYSICIAN IMMEDIATELY.
4. Position the equipment on a clear, level surface. DO NOT use the equipment
near water or outdoors.
5. Keep hands away from all moving parts.
6. Always wear appropriate workout clothing when exercising. DO NOT wear
robes or other clothing that could become caught in the equipment.
7. Use the equipment only for its intended use as described in this manual.
DO NOT use attachments not recommended by the manufacturer.
8. Before using the equipment, always do stretching exercises to properly
warm up.
9. Never operate the equipment if the equipment is not functioning properly.
Before Your Begin

03
INFORMATION
We recommend you have someone
assist you in lifting and assembling
your gym.
Follow these steps carefully and it
will make it easier to assemble your
gym.


STEP 1
SC10-6
SW10
W10
2
1
SW8
SC8-6
31
W10
N10
45
W10
SC10-16
W8
SC10-16
SW10
W10
72

04
INFORMATION
We recommend you have someone
assist you in lifting and assembling
your gym.
Follow these steps carefully and it
will make it easier to assemble your
gym.


STEP 2
NOTE:In this step,all the washers and nuts
which are not marked are W10 and N10.
53
N10
26
5
6
SC10-5
SW10
W10
SC10-6
W10
22
25
71
SC5-5
W5
70
70
69
BW10
SW8
SC8-3
51
71

05
INFORMATION
We recommend you have someone
assist you in lifting and assembling
your gym.
Follow these steps carefully and it
will make it easier to assemble your
gym.


STEP 3
12
52
19
S8-6
H6-4
W6
29
13
14
27
73
29

06
INFORMATION
We recommend you have someone
assist you in lifting and assembling
your gym.
Follow these steps carefully and it
will make it easier to assemble your
gym.


STEP 4
NOTE:In this step,all the washers and nuts
which are not marked are W10 and N10.
50
SC10-10
A10-7
W10
A10-7
W10
21
SC10-10
W10
N10
54
54
SC10-10
W10
N10 W10
N10
21
21
11
49

07
INFORMATION
We recommend you have someone
assist you in lifting and assembling
your gym.
Follow these steps carefully and it
will make it easier to assemble your
gym.
First install #16 on #7.then install
the rest.
.



STEP 5
SC10-5
SW10
7
SC10-5
SW10
W10
W10
SW8
W8
SC8-6
16
53

08
INFORMATION
We recommend you have someone
assist you in lifting and assembling
your gym.
Follow these steps carefully and it
will make it easier to assemble your
gym.


STEP 6
24
W10
15
N10
W10
SC10-25
W8
SC8-6

09
INFORMATION
When situation A occurs, please
adjust 1, 2 and 3.
When situation B occurs, please
adjust 2 .


AB
1
3
2
2

10
INFORMATION
We recommend you have someone
assist you in lifting and assembling
your gym.
Follow these steps carefully and it
will make it easier to assemble your
gym.


STEP 7
65
66
67
17
C5-4
33
1
34
C5-4

11
PREASSEMBLED STEP
47
547
20
4
62
S5-1 48
61
48
S5-1
6
61
48
S5-1
S5-1
48
62
55
7
64
C8-13
63
55
1
53
SC10-4
23 30
57
A10-4
23
SC10-4
53
10
SW8
W8
SC8-4
14
18
28
46
13
14
SC10-25
W1024
8
W10
N10
S5-1
S5-1
71
71
70 69 70
3
58
47
547
20
58
60
60
W8
9
SC8-3 SC8-2
W8
32
59
40
38
41
58
H8-7
SC8-13
W8
A8-3
N8 W8
42
39
39
58
SC8-13
W8
H8-7
41
W8
A8-3
38
38
40
35
H6-4 W6

12
PARTS LIST
PART# DESCRIPTION QTY PART# DESCRIPTION QTY
1 Weight Stack Frame 1
2 Arm Support Frame 1
53 D25 Cap 8
3 Top Arm Support Frame 1
54 Limit Interval Bushing 4
4 Left Handle 1
55 PT50X100 Cap 2
5 Swing Tube 2
56 PT40X80 Cap 4
6 Right Handle 1
57 Limiting Pad 1
7 Back Pad Support 1
58 Limit Pillars 2
8 Seat Pad Support 1
59 Limit Bushing 4
9 Camshaft Assembly 2
60 Rubber Pad 2
10 Top Frame 1
61 Straight Grip 2
11 Pulley Mount Assembly 1
62 Bending Grip 2
12 Guide Rod 2
63 Adjust Plate 1 1
13 15 lbs Weight Plate 14
64 Adjust Plate 2 1
14 10lbs Weight Stack Head 1
65 Rear Shield 1
15 Seat Pad 1
66 Front Shield 2 1
16 Back Pad 1
67
*
69
70
BW10
F
*
D42 Hole Ring
Bearing

ront Shield 1 1
*
2
4
71 Handle Ring 2
2
17 Panel Clip 8
18 Weight Stack Head Bushing 2
W6 Washer 624
19 Weight Stack Pin 1
W8 Washer 845
20 Pull Pin 2
21 Big Pulley 3
W10 Washer 10 40
22 Bearing KFL004 2
23 Rubber Foot 2
SW8 Spring Washer 8 15
24 Bushing 1 2
SW10 Spring Washer 10 12
25 Shaft 2
N8 Nut M8 12
26 Shaft D25*134.5 2
N10 Nut M10 13
27 Guide Rod Bushing 2
28 Selector 1
29 Cover Connecting Plate 4
H6-4 Hex Head Bolt M6X10 24
30 Mat Plate 1
H8-7 Hex Head Bolt M8X35 10
31 Connecting Plate 2
S5-1 Socket Set Screw M5X4 12
32 Stainless Shield
Stainless Shield Plate
Plate 1
S8-6Socket Set Screw M8X30 2
33 Shield Plate
Clamp Plate
LOGO Plate
1
C8-13 Countersunk Head Screw M8X65 2
34 1
8
C5-4 Countersunk Head Screw M5X10 2
35
A10-7 Allen Bolt M10X35 2
*
A8-3 Allen Bolt M8X12 8
*
A10-4 Allen Bolt M10X20 2
38 Cam Plate 2
SC8-2 Socket Cap Screw M8X10 2
39 Top Cam Plate 1 2
SC8-3 Socket Cap Screw M8X15 6
40 Bottom Cam Plate 1 2
SC8-4 Socket Cap Screw M8X20 4
41 Cam Interval Plate 1 2
42 1
SC8-6 Socket Cap Screw M8X30 11
*
SC8-13 Socket Cap Screw M8X65 2
*
SC10-5 Socket Cap Screw M10X25 8
SC10-4 Socket Cap Screw M10X20 245 Support Plate 1
SC10-6 Socket Cap Screw M10X30 8
46 Spring Pin 1
SC5-5 Socket Cap Screw M5X12 2
47 Bushing D38 8
SC10-10 Socket Cap Screw M10X50 3
48 Handle Cap 4
SC10-16 Socket Cap Screw M10X80 6
49 Flange Nut M12 1
SC10-25 Socket Cap Screw M10X125 2
50 Cable 1
51 2
72 Link Tube 1
73 Retainer Ring 2
Washer D37xD21
52 2
Buffer
W5 Washer 5 2