COMPOUND PLATINUM Series User manual

OWNER’S MANUAL
CAUTION: Read all precautions and instructions before using
this equipment. Save this manual for future reference.
CABLE CROSSOVER
CPL-CBC-1023
ASSEMBLY INSTRUCTIONS
SKU: CPL-CBC-1023
CABLE CROSSOVER
PIN LOADED MACHINE
PLATINUM SERIES
COMPOUND.
FITNESS EQUIPMENT
CAUTION: Read all precautions and instructions before
using this equipment. Save this manual for future reference.

01
CONTENTS
02 General warnings and maintenance advice
60-30 Assembly Instructions
Explained as a series of steps,with each step containing:
Pictures,descriptions of the parts required
Notes
Diagram showing how the parts fit together
tsiL traP 90- 70




Assembly Instructions
02
This exercise equipment is built for optimum safety. Be sure to read the entire
manual before you assemble or operate your equipment. Please note the
following safety precautions:
1. Keep children and pets away from the equipment at all times. Do not leave
children unattended in the same room with the equipment.
2. Only one person at a time should use the equipment.
3. If the user experiences dizziness, nausea, chest pain, or any other abnormal
symptoms STOP the workout at once CONSULT A PHYSICIAN IMMEDIATELY.
4. Position the equipment on a clear, level surface. DO NOT use the equipment
near water or outdoors.
5. Keep hands away from all moving parts.
6. Always wear appropriate workout clothing when exercising. DO NOT wear
robes or other clothing that could become caught in the equipment.
7. Use the equipment only for its intended use as described in this manual.
DO NOT use attachments not recommended by the manufacturer.
8. Before using the equipment, always do stretching exercises to properly
warm up.
9. Never operate the equipment if the equipment is not functioning properly.
Before Your Begin

03
INFORMATION
We recommend you have someone
assist you in lifting and assembling
your gym.
Follow these steps carefully and it
will make it easier to assemble your
gym.
T
ighten all the bolts/nuts.



STEP 1

NOTE:
In this step ,all the washers
and nuts which are not marked
are W10 and N10.
W6
W4
CH6-4
CH4-5
A8-3
H10-5
SC10-20
SC10-22
1
12
18
21
27
28
7
8
9
29
30
30
30
30 36
37
38
31 51
W6
SC6-10
38
38
38
11
25
24
20
17 x6
19 x8
16
H6-6
W6B
32
17
19
×7
×10
18
34
35

04
INFORMATION
We recommend you have someone
assist you in lifting and assembling
your gym.
Follow these steps carefully and it
will make it easier to assemble your
gym.
T
ighten all the bolts/nuts.



STEP 2

NOTE:
In this step ,all the washers
and nuts which are not marked
are W10 and N10.
N10
W10
N10
W10
W10
W10 SC10-29
SC10-29
SC10-14
SC10-10
SC10-11
SC10-11
SC10-22
SC10-22
SC10-10
SC10-10
5
5
4
1
3
8
6
42
13
26
10
15
47
50
43
39
39
40
39
43
39
8245mm
NOTE:Assemble the cap first.
39
14
52
53
CH4-7

05
INFORMATION
We recommend you have someone
assist you in lifting and assembling
your gym.
Follow these steps carefully and it
will make it easier to assemble your
gym.
T
ighten all the bolts/nuts.



STEP 3
S5-1
2
44
45
46
23
22

NOTE:
This step is Pre-Assembly.
A8-3
W8B 41
33
A8-3
W8B

06
INFORMATION
We recommend you have someone
assist you in lifting and assembling
your gym.
Follow these steps carefully and it
will make it easier to assemble your
gym.
T
ighten all the bolts/nuts.



STEP 4
48
49
54
1
SC10-19
W10
W10
N10
2

07
PARTS LIST
Part# Description Qty
1 Main Frame 2
2 Linking Tube 1
3 Adjuster Post Base 2
4 Adjuster Post 2
5 Tube Top 4
6 Guide Post 4
7 Selecter Bar 2
8 Adjuster Lever Assembly 2
9 Swivel Pulley Carriage 2
10 Pulley Bracket 2
11 Carriage Shround 2
12 Lable Placard 2
13 Arc Plate 2
14 Pulley Cap 8
15 Guide Post Bushing 4
16 Fixing Plate 8
17 5 Kg Weight Plate 14
18 2.5 Kg Top Weight Plate 2
19 7.5 Kg Weight Plate 20
20 Weight Stack Pin 2
21 Spring Pin 2
22 Handle End Cap 6
23 Handle Ring 6
24 Rubber Foot 6
25 Footcover 6
26 Shock Rubber Gasket 8
27 Weight Stack Bushing 52
28 Weight Stack Head Bushing 4
29 Slide Bushing 6
30 Bearing 6203 16

08
PARTS LIST
Part# Description Qty
31 Shaft D19x117.5 2
32 ADJ Plate 4
Front Panel 2
2.5 Kg Weight Plate 2
Weight Label 2
33
34
35
36 Shaft D17x90.5 6
37 Shaft D17x76 2
38 E Washer 16
39 Pulley D114 14
40 Pulley D89 2
41 Panel 2
42 End Cap 40x80 2
43 Plastic Stoper 8
44 Grip 384 2
45 Grip 195 2
46 Grip 170 2
47 Retaining rings D25 4
48 Single Handle 2
49
50
A
Cable L8169mm
nkle Strap 2
2
51 Bumper 2
52 Cap D245 4
53 Half Cap D245 2
54 Carabiner 2
S5-1 Socket Set Screw M5x4 24
S8-10 Socket Set Screw M8x50 4
H10-5 Hex Head Bolt M10x25 12
SC10-10 Socket Cap Screw M10x50 12
SC10-11 Socket Cap Screw M10x55 6
SC10-14 Socket Cap Screw M10x70 2

09
PARTS LIST
Part# Description Qty
SC10-22 Socket Cap Screw M10x110 10
SC10-29
A6-10
S
Allen Bolt M6x30
ocket Cap Screw M10x145 8
4
A8-3 Allen Bolt M8x15 18
N10 Nylon Nut M10 52
W4 Washer 48
W6 Washer 61
W6B Big Washer 6 16
6
W8B Big Washer 8 OD24 16
W10 Washer 10 80
SC10-20 Socket Cap Screw M10x100 2
SC10-19 Socket Cap Screw M10x95 8
CH4-5 Cross Recessed Pan Head Screw M4x10 8
CH6-4 Cross Recessed Pan Head Screw M6x10 12
CH4-7 Cross Recessed Pan Head Screw M4x16 8