COMPOUND PLATINUM Series User manual

SKU: CPL-LEP-1084
ASSEMBLY INSTRUCTIONS
LEG EXTENSION / PRONE LEG CURL
PLATINUM SERIES
COMPOUND.
FITNESS EQUIPMENT
CAUTION: Read all precautions and instructions before
using this equipment. Save this manual for future reference.

01
CONTENTS
02 General warnings and maintenance advice
08-30 Assembly Instructions
Explained as a series of steps,with each step containing:
Pictures,descriptions and quantities of the parts required
Notes
Diagram showing how the parts fit together
tsiLtraP09
●
●
●

Assembly Instructions
02
This exercise equipment is built for optimum safety. Be sure to read the entire
manual before you assemble or operate your equipment. Please note the
following safety precautions:
1. Keep children and pets away from the equipment at all times. Do not leave
children unattended in the same room with the equipment.
2. Only one person at a time should use the equipment.
3. If the user experiences dizziness, nausea, chest pain, or any other abnormal
symptoms STOP the workout at once CONSULT A PHYSICIAN IMMEDIATELY.
4. Position the equipment on a clear, level surface. DO NOT use the equipment
near water or outdoors.
5. Keep hands away from all moving parts.
6. Always wear appropriate workout clothing when exercising. DO NOT wear
robes or other clothing that could become caught in the equipment.
7. Use the equipment only for its intended use as described in this manual.
DO NOT use attachments not recommended by the manufacturer.
8. Before using the equipment, always do stretching exercises to properly
warm up.
9. Never operate the equipment if the equipment is not functioning properly.
Before Your Begin

03
STEP 1
9
W10
SC10-24
SC10-24
SC10-24
10
3
SC10-24
SC10-24
SC10-24
1H6-4
W6
33
N10
W10
W6
W6
W6
H6-4
SC10-24
8
W10
N10
N10
W10
In this step,all the washer and nuts which are not marked are W10 and N10.NOTE:

04
STEP 2
1
2
80
23
S8-6
49
17
22
19
18
20
74
21
28

05
STEP 3
24
A10-9 W10
68
82
SC10-10
SC10-5
SC10-3
W10
29
81
4
46
58
30
54 46
5
W10
SC10-8
6
SC8-14
SC8-14
41
W8
W8
SC10-5
SC10-5
N10
W10
W10
In this step,all the washers and nuts which are not marked are W10 and N10.
NOTE:

06
STEP 4
14
01N 01W
56
25
SC8-4
SC8-4
SC8-4
W8
W8
7
11
4
12
SC10-14
W10
13
36
W10
A10-5
A10-5
SC5-6
SC5-6
W5
W5
SC10-25
W10
S6-2
50
66
65
66
42
SC8-5 67
3
W8
In this step,all the washer and nuts which are not marked are W10 and N10.NOTE:
58

07
STEP 5
59
60
SC8-4
W8
32 W8
W8
A8-3S
A8-3S
16
48
3
47
SC8-4
SC8-5
SC8-4
SC8-5
SC8-4
A8-3
61A6-4
W6B
63
1
34
35
34
A6-4
W6B
C5-4
H6-4
W6
27
33
H6-4
W6

08
PREASSEMBLED STEP
71
SC8-4
555
57
55
16
40
C5-4
38
C5-4
W5
SC5-5
36
38
C5-4
37
30 W5
SC5-5 W5
SC5-5
15 39
C5-4
C5-4
31 44
75
A10-4
55
55
71
W10
A10-4
51
25
55
W10
A10-4
55
4
12
53
S5-1
69
54
S5-1
52
52
71
52 26
26
78
C5-4
78
C5-4
72
SC10-4
76
3
52
25 7
13
S5-1
54
70
S5-1
14
70
S5-1
54
A10-4
77
43
76
SC10-4
72
79
C5-4
1
2
H6-4
W6 27

09
PARTS LIST
PART# DESCRIPTION QTY PART# DESCRIPTION QTY
1 Main Frame 1 57 Hole Ring 1
2 Top Frame 1 58 Wave Washer 2
3 Seat Tube Group 1 59 Back Pad 1
4 Swing Arm Group 1 60 Seat Pad 1
5 Pendulum Group 1 61 Rear Shield 1
6 Wheelset Shaft Group 1 62 Front Shield 1 1
7 Swing Plate Group 1 63 Front Shield 2 1
8 Front Connection Group 1 64 Round Plate 1
9 Lower Connection Group 1 65 Long Foam Roller 1
10 Rear Connection Group 1 66 Foam Roller Cap 1 2
11 Leg Pressing Shaft Group 1 67 Foam Roller Cap 2 1
12 Back Handle group 1 68 114 Pulley 1
13 Left Handle group 1 69 Grip 1 2
14 Right Handle group 1 70 Grip 2 2
15 Back Pad Adjust Group 1 71 PT50X100 Cap 3
16 Seat Pad Adjust Group 1 72 D25 Cap 4
17 Guide Rod 2 *
18 Selector 1 74 Buffer 2
19 1
7
75 Cushion 1
20 5 Kg
5 Kg Top Weight Plate
Weight Plate
7.5 Kg Weight Plate 10
76 L Rubber Foot 4
21 77 Limiting Pad 1
22 Weight Stack Head Bushing 2 78 Protective Plastic Plate 2
23 Weight Stack Pin 1 79 Plastic Plate 1
24 Cable 1 80 Weight Stack Label 1
81 Spacer Tube 1
82 89 Pulley 1
25 Pin 1 2
SC5-5 Socket Cap Screw M5X12 3
26 Pin 2 2
SC5-6 Socket Cap Screw M5X15 2
2
28
7 Clip Plate 6
Retainer Ring 2
SC8-4 Socket Cap Screw M8X20 11
29 Support Plate 1
SC8-5 Socket Cap Screw M8X25 7
30 Pendulum Spoke Plate 1
SC8-14 Socket Cap Screw M8X70 2
31 Back Pad Supporting Plate 1
SC10-3 Socket Cap Screw M10X16 1
32 Seat Pad Supporting Plate 1
SC10-4 Socket Cap Screw M10X20 4
33 Cover Connecting Plate 4
SC10-5 Socket Cap Screw M10X25 3
34 LOGO Plate 1 1
SC10-8 Socket Cap Screw M10X40 5
35 LOGO Plate 2 1
SC10-10 Socket Cap Screw M10X50 1
36 Leg Pressing Adjustment Plate 1
SC10-14 Socket Cap Screw M10X70 2
37 Adjustment Protecting Plate 1 1
SC10-24 Socket Cap Screw M10X120 12
38 Adjustment Protecting Plate 2 1
SC10-25 Socket Cap Screw M10X125 2
39 Adjustment Protecting Plate 3 1
40 Adjustment Protecting Plate 4 1
*
A8-3S Allen Bolt M8×12 4
41 Mat Plate 2 1
A10-4 Allen Bolt M10X20 5
42 Big Washer 1
A10-5 Allen Bolt M10X25 243 Mat Plate 1
A10-9 Allen Bolt M10X45 1
44 Mat Ring 1
C5-4 Countersunk Head Screw M5X10 22
45 Cable Plate 1
S5-1 Socket Set Screw M5X4 12
46 Interval Bushing 1
S6-2 Socket Set Screw M6X6 2
47 Back Pad Shaft 1
S8-6 Socket Set Screw M8X30 248 Seat Pad Shaft 1
49 Guide Rod Bushing 2 H6-4 Hex Head Bolt M6X10 28
50 Foam Roller Ring 1 W5 Washer Φ55
51 Counterweight Iron 1 W6 Washer Φ620
52 D25 Bushing 4 W8 Washer Φ8 2
W6B Big Washer 6 8
3
53 Handle Ring 2
W10 Washer Φ10 51
54 Handle Cap 4
SW8 Spring Washer Φ8 6
55 Bearing 6206 6
N10 Nut M10 20
56 Shaft Ring 1