COMPOUND PLATINUM Series User manual

SKU: CPL-MAB-138
ASSEMBLY INSTRUCTIONS
MODULAR ADJUSTABLE BENCH
PLATINUM SERIES
COMPOUND.
FITNESS EQUIPMENT
CAUTION: Read all precautions and instructions before
using this equipment. Save this manual for future reference.
OWNER’S MANUAL
CAUTION: Read all precautions and instructions before using
this equipment. Save this manual for future reference.
MODULAR
ADJUSTABLE BENCH
CPL-MAB-138

Assembly Instructions
02
This exercise equipment is built for optimum safety. Be sure to read the entire
manual before you assemble or operate your equipment. Please note the
following safety precautions:
1. Keep children and pets away from the equipment at all times. Do not leave
children unattended in the same room with the equipment.
2. Only one person at a time should use the equipment.
3. If the user experiences dizziness, nausea, chest pain, or any other abnormal
symptoms STOP the workout at once CONSULT A PHYSICIAN IMMEDIATELY.
4. Position the equipment on a clear, level surface. DO NOT use the equipment
near water or outdoors.
5. Keep hands away from all moving parts.
6. Always wear appropriate workout clothing when exercising. DO NOT wear
robes or other clothing that could become caught in the equipment.
7. Use the equipment only for its intended use as described in this manual.
DO NOT use attachments not recommended by the manufacturer.
8. Before using the equipment, always do stretching exercises to properly
warm up.
9. Never operate the equipment if the equipment is not functioning properly.
Before Your Begin

03
INFORMATION
We recommend you have someone
assist you in lifting and assembling
your gym.
T
ighten all the bolts/nuts.


1
23
4
5
H10-19
W10
H8-6
W8B
6
Preassembled Subassembly
89
4
10
11
H20-22
W20
H10-19
W10
N20
W20
H10-26
W10B
H8-6
W8B
H10-19
W10
112
H10-9
W10 13 10
2
A10-3
W10
8
3
H8-4
14
15
16 17 18
19
12
14
20
21
16
17
18
191422

04
TS LIST
PART NO. DESCRIPTION QTY
1 Bottom Lateral Tube 1
Base Frame 1
Swinging Sleeve 1
Shaft D25 L=66 4
Back Pad Support Frame 1
Back Pad 1
* *
Seat Frame 1
Seat Pad 1
Swinging Sleeve 2 1
Shaft D25 L= 111 1
Rubber Foot 3
Wheel 2
Bushing 10
Perforated Tube 1 1
Plastic Bushing 4
Pull Pin 2
Compressive Spring 2
Knob 2
Pad 1
Perforated Tube 2 1
Hand Grip 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
W10 Washer 10 14
W10B Big Washer 10 2
W20 Washer 20 4
N10 Lock Nut M10 7
N20 Lock Nut N20
Button Head Screw M10×16
2
W8B Big Washer 8 5
PAR
PART NO. DESCRIPTION QTY
A10-3
2
Hex Head Bolt M8×20H8-4
2
Hex Head Bolt M8×30H8-6
5
Hex Head Bolt M10×45H10-9
2
Hex Head Bolt M10×95H10-19
4
Hex Head Bolt M10×130H10-26
1
Hex Head Bolt M20×110H20-22
2