COMPOUND PLATINUM Series User manual

SKU: CPL-45LP-1059
ASSEMBLY INSTRUCTIONS
LINEAR 45 DEGREE LEG PRESS
PLATINUM SERIES
COMPOUND.
FITNESS EQUIPMENT
CAUTION: Read all precautions and instructions before
using this equipment. Save this manual for future reference.
OWNER’S MANUAL
CAUTION: Read all precautions and instructions before using
this equipment. Save this manual for future reference.
CPL-45LP-1059

01
CONTENTS
02 General warnings and maintenance advice
03-06 Assembly Instructions
Explained as a series of steps,with each step containing:
Pictures,descriptions and quantities of the parts required
Notes
Diagram showing how the parts fit together
tsiL traP 07




Assembly Instructions
02
This exercise equipment is built for optimum safety. Be sure to read the entire
manual before you assemble or operate your equipment. Please note the
following safety precautions:
1. Keep children and pets away from the equipment at all times. Do not leave
children unattended in the same room with the equipment.
2. Only one person at a time should use the equipment.
3. If the user experiences dizziness, nausea, chest pain, or any other abnormal
symptoms STOP the workout at once CONSULT A PHYSICIAN IMMEDIATELY.
4. Position the equipment on a clear, level surface. DO NOT use the equipment
near water or outdoors.
5. Keep hands away from all moving parts.
6. Always wear appropriate workout clothing when exercising. DO NOT wear
robes or other clothing that could become caught in the equipment.
7. Use the equipment only for its intended use as described in this manual.
DO NOT use attachments not recommended by the manufacturer.
8. Before using the equipment, always do stretching exercises to properly
warm up.
9. Never operate the equipment if the equipment is not functioning properly.
Before Your Begin

03
STEP 1
1
2
26
27
51
52
W10SC10-16
3
3
5
SC10-16 W10 27
W10SC10-5
W10 N10
26
27
W10 SC10-16
27 W10 SC10-16
SC10-16
SC10-16
W10 SC10-5

04
STEP 2
12
SC12-15
W12
W12
N12
37
42
W10
SC10-5
W10
SC10-5
2
1
13
34
STEP1:Thread
STEP1 STEP2
The Two Guide Rods (12#) Through 4# At The Same Time.
STEP2:Thread The Two Guide Rods (12#) To The Tube (1# And 2# ) At The Same Time.
W10
SC10-5
43
55

05
INFORMATION
We recommend you have someone
assist you in lifting and assembling
your gym.
Follow these steps carefully and it
will make it easier to assemble your
gym.


STEP 3
NOTE:Adjust 1# and 2# to parallel position and then tighten all the bolt.
16
2
23
14
SC8-6
W8
W10
SC10-13
SC10-7
W10
SC10-4
30
W8
SC8-6
5
N10
W10
10
11
15
7
19 40
41
1
43

06
1
28 W10
N10
8
49
33
S5-1 49
33
S5-1
45
31
30
SC10-4
31
18
31
W10
SC10-17
2
28W10N10
45
9
49
33
S5-1
45
31
30
SC10-4
SC10-17W10
31
3
CH5-4 4625
N10 W10
SC10-22
W10
25
2924
17
29
S8-3
53
49
33
S5-1
PREASSEMBLED STEP
50
S5-1
33
48
4
35
36
CH5-4
47
W10
A10-5
5
44
A10-4
20
7
32
54
57
SC10-4
SC10-4
30
30
6
39
SC10-3
W10
N10
W10
56
C5-3

07
PARTS LIST
PART # DESCRIPTION QTY
1 Left Main Frame 1
2 Right Main Frame 1
3 Linking Frame 1
4 Sliding Frame 1
5 Base Frame 1
6 Footrest Plate 1
7 Back Pad Support Frame 1
8 Left Position Tube 1
9 Right Position Tube 1
10 Adjusting Plate 1 1
11 Adjusting Plate 2 1
12 Guide Rod 2
13 Long Barbell Rod 4
14 Back Pad 1
15 Head Pad 1
16 Seat Pad 1
17 Position Plate 1
18 Fixing Bushing 2
19 Short Barbell Rod 4
20 Pull Pin 1
21 * *
22 * *
23 Shaft 3 1
24 Shaft 4 1
25 Plate 2
26 Strengthening Plate 1 2
27 Strengthening Plate 2 4
28 Strengthening Plate 3 2
29 Ring 2
30 Big Washer 4
31 Bushing 1 8
32 Bushing 2 2
33 Handle Cap 6
34 Clip 4
35 Linear Bearing 4
36 Circlips 4
37 D Cap 2
38 Pt50x100 Cap 1
39 Pt40x80 Cap 1 2
40 D48 End Cap 4
41 D25 Cap 8
42 Bumper 1 2
43 D48 Ring 8
44 Rubber Plate 1 1
PART # DESCRIPTION QTY
45 Rubber Plate 2 4
46 Rubber Plate 3 1
47 Rubber Plate 4 1
48 Rubber Plate 5 2
49 Grip 1 5
50 Grip 2 1
A10-4 Allen Bolt M10x20 2
A10-5 Allen Bolt M10x25 2
CH5-4 Countersunk Head Screw M5X10 6
S5-1 Socket Set Screw M5x4 12
S8-3 Socket Set Screw M8x8 2
SC8-6 Socket Cap Screw M8x30 6
2
10
SC10-5 Socket Cap Screw M10x25
SC10-16 Socket Cap Screw M10x80 12
SC10-17 Socket Cap Screw M10x85 4
SC10-22 Socket Cap Screw M10x110 3
SC12-15 Socket Cap Screw M12x75 4
W8 Washer 8 6
W10 Washer 10 76
W12 Washer 12 8
N10 Nut M10 34
N12 Nut M12 4
51 Linking Tube 1 1
52 Linking Tube 2 1
6SC10-4 Socket Cap Screw M10x20
4
SC10-7 Socket Cap Screw M10x35
5
SC10-13 Socket Cap Screw M10x65
5
54
55
56
57
SC10-3 Socket Cap Screw M10x15
Pt65x115 Cap
Rubber Round Cap
LOGO Plate
Function Board
3 Pt40x80 Cap 2 1
1
4
1
1