COMPOUND PLATINUM Series User manual

SKU: CPL-FNT-1024
ASSEMBLY INSTRUCTIONS
FUNCTIONAL TRAINER
PLATINUM SERIES
COMPOUND.
FITNESS EQUIPMENT
CAUTION: Read all precautions and instructions before
using this equipment. Save this manual for future reference.

01
CONTENTS
02 General warnings and maintenance advice
70-30 Assembly Instructions
Explained as a series of steps,with each step containing:
Pictures,descriptions and quantities of the parts required
Notes
Diagram showing how the parts fit together
tsiL traP 08




Assembly Instructions
02
This exercise equipment is built for optimum safety. Be sure to read the entire
manual before you assemble or operate your equipment. Please note the
following safety precautions:
1. Keep children and pets away from the equipment at all times. Do not leave
children unattended in the same room with the equipment.
2. Only one person at a time should use the equipment.
3. If the user experiences dizziness, nausea, chest pain, or any other abnormal
symptoms STOP the workout at once CONSULT A PHYSICIAN IMMEDIATELY.
4. Position the equipment on a clear, level surface. DO NOT use the equipment
near water or outdoors.
5. Keep hands away from all moving parts.
6. Always wear appropriate workout clothing when exercising. DO NOT wear
robes or other clothing that could become caught in the equipment.
7. Use the equipment only for its intended use as described in this manual.
DO NOT use attachments not recommended by the manufacturer.
8. Before using the equipment, always do stretching exercises to properly
warm up.
9. Never operate the equipment if the equipment is not functioning properly.
Before Your Begin

03
INFORMATION
We recommend you have someone
assist you in lifting and assembling
your gym.
Follow these steps carefully and it
will make it easier to assemble your
gym.
Fit bolts with 50% force.



STEP 1
SC12-28
W12
SC12-28
SC12-28
N12
Note：The types of all washers and
nuts used in this step are 12
and M12 respectively
2
1
when assembling the equipment, part 1
and part 2 must be supported.

04
INFORMATION
We recommend you have someone
assist you in lifting and assembling
your gym.
Follow these steps carefully and it
will make it easier to assemble your
gym.
Fit bolts with 50% force.



STEP 2
H6-6
H6-4
W6B
45
14
W6B
17
A8-3
W8B

05
INFORMATION
We recommend you have someone
assist you in lifting and assembling
your equipment.
Follow these steps carefully and it
will make it easier to assemble your
gym.
Fit bolts with 50% force.



STEP 3
29
31
42
FN12
63
38
S8-6
19
60
26

06
STEP 4

07
INFORMATION
T
ighten all the bolts/nuts.
STEP 5
15
16
A8-3
W8B

08
21
52
40
42
29
27
32
28
26
9FN12
SC10-15
W10
19
64
63
A8-3
W8
SC10-11
18
37
1/2
10/11
48 43 39 SC10-22
SC10-11
46
SC10-11
20
SC10-20
24
33
34
6
SC10-10
SC10-22
34
33
41
25
7/8
CH4-5
13
4
50
49
51
22
23 S5-1
3
12 47
SC10-17
5
44
36
35
SC10-11
SC10-11
SC10-13
SC10-22
39
A6-4
W6
H10-5
SC12-28
W12
SC12-28
W12
55
59 56 53
57
FN16
58
10
11
45
61
62
38
PRE-ASSEMBLY
W10
A6-9
54
64
W6
65

PARTS LISTTS LIST
09
1 1
1
2
Left Frame
47 Hook Sheath 6
48 Plastic Cover 4
49 Hand Grip 375mm LG 2
50 Hand Grip 185mm LG 2
51 Hand Grip 250mm LG 2
52 Small Pulley 2
53 Strap Handle (Short)
Spring
2
54 2
55 Ankle Strap 1
56 Triceps Rope 1
57 Long Latbar
Short Latbar
1
58 1
59 Carabiner 4
60 Weight Label 2
61 Left Function Diagram 1
62 Right Function Diagram 1
63 Retaining ring 4
64 Knob 2
65 L Plate 4
CH4-5
Cross groove Pan Head Screws M4×10 8
CH6-4
Cross groove Pan Head Screws M6×10 12
H10-5
Hex Head Bolt M10 ×25 8
H6-4
Hex Head Bolt M6 ×10
4
H6-6
Hex Head Bolt M6 ×15
16
S5-1 24
SC10-10
Hexagon socket head screw M10×50
4
SC10-11
Hexagon socket head screw M10×55
16
SC10-13
Hexagon socket head screw M10×65
2
SC10-15
Hexagon socket head screw M10×75
2
SC10-17
Hexagon socket head screw M10×85
4
SC10-20
Hexagon socket head screw M10×100
2
SC10-22
Hexagon socket head screw M10×110
10
SC12-28
Hexagon socket head screw M12×140
12
FN12
Flange Nut M12
Flange Nut M16
2
FN16 2
Nut M10
N10 48
Nut M12
N12 12
Washer 4
Washer 6
Washer 8
Washer 10
Washer 12
W4
W6
W8
W10
W12
8
16
Big Washer 6W6B 20
2
Big Washer 8 OD24W8B 16
64
24
S8-6
A6-9
Socket set screw M8×30
Socket set screw M5×4
Hexagon socket button head screw M6×30
4
4
A8-3
Hexagon socket button head screw M8×15
18
Right Frame
Crossbar
1
Upper Crossbar
2
Adjuster tube
2
Swivel Pulley Housing
1
Left Adjuster Lever Assembly
1
1
Right Adjuster Lever Assembly
2
Adjustable Pulley Mount Assembly
Left Poster Board
1
Right Poster Board
2
Hook Plate Assembly
2
Adjuster Lever Door Plate
1
Back Logo Plate
2
Shield Plate 1
2
Shield Plate 2
8
Connect Plate
2
U Type Plate
4
Guid Rod
2
Pull Pin
2
Cable
6
Hand Cap
6
Hand Ring
2
Bushing OD17×76mm
6
Bushing OD17×90.5mm
2WT Selector Pin Assembly
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART # DESCRIPTION QTY
QTY DESCRIPTION
21
PART #
22
23
24
25
26
2Spring Pin
27
221 Hole Stem
28
2Cast Top Weight
29
76Cast Weight Bushing
30
3820 Lbs Weight Plate
31
4Guid Rod Bushing
32
16Rolling Bearing 6203
33
16E rings
34
4Pulley Cap 1
35
12Pulley Cap 2
36
2Thick Rubber Donut
37
4Alumnium Solenoid
38
8Plastic Stop
39
20Pulley
40
6Plastic Wheel
41
4Plastic Stopper
42
4Plastic Underlay
43
2PT 40×75 Cap
44
2Shield
45
2PT 65×114 Cap
46