COMPOUND PLATINUM Series User manual

OWNER’S MANUAL
CAUTION: Read all precautions and instructions before using
this equipment. Save this manual for future reference.
SS-6008
SKU: CPL-LPD-6008
ASSEMBLY INSTRUCTIONS
LAT PULLDOWN PIN LOADED MACHINE
PLATINUM SERIES
COMPOUND.
FITNESS EQUIPMENT
CAUTION: Read all precautions and instructions before
using this equipment. Save this manual for future reference.

01
CONTENTS
02 General warnings and maintenance advice
08 snoitcurtsnI ylbmessA03-
Explained as a series of steps,with each step containing:
Pictures,descriptions and quantities of the parts required
Notes
Diagram showing how the parts fit together
tsiL traP 09




Assembly Instructions
02
This exercise equipment is built for optimum safety. Be sure to read the entire
manual before you assemble or operate your equipment. Please note the
following safety precautions:
1. Keep children and pets away from the equipment at all times. Do not leave
children unattended in the same room with the equipment.
2. Only one person at a time should use the equipment.
3. If the user experiences dizziness, nausea, chest pain, or any other abnormal
symptoms STOP the workout at once CONSULT A PHYSICIAN IMMEDIATELY.
4. Position the equipment on a clear, level surface. DO NOT use the equipment
near water or outdoors.
5. Keep hands away from all moving parts.
6. Always wear appropriate workout clothing when exercising. DO NOT wear
robes or other clothing that could become caught in the equipment.
7. Use the equipment only for its intended use as described in this manual.
DO NOT use attachments not recommended by the manufacturer.
8. Before using the equipment, always do stretching exercises to properly
warm up.
9. Never operate the equipment if the equipment is not functioning properly.
Before Your Begin

03
STEP 1
2
SC10-15
W10
3
415
SC10-15
W10

04
STEP 2
6
7
8
10
11
S8-6
9

05
STEP 3
13
FN12
A10-9
W10
14
15
SC10-9
W10

06
STEP 4
16
17
18
19
C8-6
20
21
SC8-14
W8
SC10-19
W10

07
STEP 5
28
29
22
23
24
25
25
26
27

08
PREASSEMBLED STEP
28
S5-1
1
3
20 19 C8-6
N8
W8
16
9
36
30
A10-4
31
32
33
34
35
SC10-4
H6-4
W6
SC8-3
W8
SW8
34
31
35
SC10-4
37
38
39
40
41
42
45
43 44 46 47 48
S6-2
49
50SC8-5
51 52
53
S5-1

09
PARTS LIST
PART DESCRIPTION QTY PART DESCRIPTION QTY
1 Main Frame 1
Bent Support Plate 1
Seat Supporting Frame 1
Back Plate 1
Back Plate 1
Back Plate 2 1
1
15LBS Weight Plate 14
Weight Pin
1Top Weight Plate 10 LBS
2Retainer Ring OD32
2Guide Rod Retainer
1Cable Group
2Pulley 114
1Holding Hook
1Lap Pressing Frame
1Shaft
2Retainer D19
1Plastic Slot Plate
1Performated Plate
1Seat Pad
1Front Shield
1Front Shield 2
1Front Upper Shield
1Back Upper Shield
1Back Shield
1Lat Bar
1Carabiner
1Rubber Pad
3
Rubber Foot
1
Transverse Tube Assy
8
Clamp Plate
2
FO Cap
3
Hole Cap
1
Elastic Pin
2
Retainer Ring D32
4
Rubber Ring
2
Bushing
2
Retainer Ring
1
Selector Rod
2
Bushing
1
Pull Pin
1
Spring
1
Knob
2
Foam Limit Ring
2
Foam Bushing
8Panel Clip
4 Foam Roller 2
Big Washer OD 45 2
Foam Cap 2
Inner Ring D25 2
Outer Ring D25 2
Hand Grip 2
8
2 49
3 50
4 51
5 52
6 53
7
8
9
10
11
*
13
14
15
16
17
18
19
20
S5-1 Socket Set Screw M5X4
Socket Set Screw M6X8
12
S6-3 4
21
22
S8-6 Socket Set Screw M8X30 2
23
C5-4 Countersunk Head Screw M5X10 2
C8-6 Countersunk Head Screw M8X30 2
24
25
26
A10-4 Allen Bolt M10X20 2
27
A10-9 Allen Bolt M10X45 1
28
29
SC8-3 Socket Cap Screw M8X15 4
SC8-5 Socket Cap Screw M8X25 2
30
31
SC10-4 Socket Cap Screw M10X20 3
32
SC10-9 Socket Cap Screw M10X45 2
33
34
SC10-15 Socket Cap Screw M10X75 6
SC10-19 Socket Cap Screw M10X95 2
H6-4 Hex Head Bolt M6X10 24
SC10-14 Socket Cap Screw M10X70 2
35
36
37
38
W6 Washer 6 25
39
W8 Washer 8 8
SW8 Spring Washer 8 4
40
W10 Washer 10 20
41
42
43
N8 Nut M8 2
N10 Nut M10 10
44
45
46
47