Costway SP37522DE User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
EN DEFR ES IT PL
USER'S MANUAL/HANDBUCH
/MANUEL DE L'UTILISATEUR/MANUAL DEL USUARIO
/MANUALE UTENTE/INSTRUKCJA OBSŁUGI
SP37522DE
TREADMILL / Klappbares Laufband /
Tapis Roulant / Cinta de Correr /
Tapis Roulant / Składana bieżnia
EN
DE
FR
ES
IT
PL
With your inspiring rating, COSTWAY will be more consistent to offer you EASY
SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
Mit Ihrer inspirierenden Bewertung wird COSTWAY konsistenter sein, um Ihnen EIN
SCHÖNES EINKAUFSERLEBNIS, GUTE PRODUKTE und EFFIZIENTEN SERVICE zu
bieten!
Avec votre évaluation inspirante, COSTWAY continuera à fournir une EXPÉRIENCE
D’ACHAT PRATIQUE, des PRODUITS DE QUALITÉ et un SERVICE EFFICACE !
Con su calificación inspiradora, COSTWAY será más consistente para ofrecerle
EXPERIENCIA DE COMPRA FÁCIL, BUENOS PRODUCTOS y SERVICIO EFICIENTE.
Con la tua valutazione incoraggiante, COSTWAY sarà più coerente per offrirti
ESPERIENZA DI ACQUISTO FACILE, BUONI PRODOTTI e SERVIZIO EFFICIENTE!
Dzięki twojej opinii COSTWAY będzie mógł oferować jeszcze WYGODNIEJSZE
ZAKUPY, LEPSZE PRODUKTY i SPRAWNIEJSZĄ OBSŁUGĘ KLIENTA.
US office: Fontana UK office: Ipswich AU office: Truganina
DE office: FDS GmbH, Neuer Höltigbaum 36, 22143 Hamburg, Deutschland
FR office: Saint Vigor d'Ymonville PL office: Gdańsk

WARNING!ENFORCEMENT!
1.Safety Precautions & Warning Instructions
NOTE: Please read the instruction carefully before using and pay
attention to the following safety precautions.
★The treadmill is suitable to be placed indoors to avoid moisture,
splash water and any foreign matter on the treadmill.
★Please wear appropriate sportswear and sports shoes before
exercise. Don't run barefoot on the treadmill and keep your body
stretched.
★The power plug must be connected reliably grounded, and the
socket must have a dedicated circuit to avoid sharing with other
electrical equipment.
★Children should keep away from the machine to avoid accidents.
★It is necessary to avoid overload operation for a long time.
Otherwise the motor and controller will be damaged. The bearing,
running belt and running plate will be worn and aged. Please keep
regular maintenance.
★Reduce indoor dust. Maintain a certain indoor humidity, avoid
strong static electricity. Otherwise it may interfere with the electronic
meter. Keep controller normally working.
★Please turn off the treadmill power after exercise.
★Keep the clean and fresh air in the room when you use the
treadmill.
★Please fasten the safety lock cable clip on the clothes when
exercising in case of emergency.
★Please stop exercising and consult your doctor if you feel
uncomfortable or abnormal during using.
★Please put silicone oil in a place out of the reach of children to
avoid serious consequences caused by accidental ingestion after use.
Warning: Please observe the following regulations in order
to reduce accidents or injuries to others.
★Please check your clothing or zipper before using the treadmill.
★Don't wear clothes that may get caught on the treadmill.
★Do not place the power cord near a hot object.
★Keep children away from the treadmill.
★Don't use the treadmill out of the door.
★The power must be cut off before moving treadmill.
★Non-professional person shall not open the upper guard cover
and the left and right rear housing without authorization.
★This treadmill can only be used in circuit of 20A.
★Only one person can exercise on the treadmill when the machine
starts.
★Please stop exercising immediately and consult a fitness instructor
when you feel dizziness, chest pain, nausea or shortness of breath
during exercise.
Please be sure to discuss with a professional doctor before
using if you are receiving medical treatment from a doctor or the
following patient.
(1)Having back pain now or injury for leg, waist and neck in the past
and the people who have problem with leg (those with chronic
diseases such as disc herniation, spondylolisthesis, cervical
herniation)
(2)Having deformed sex arthritis, rheumatism, gout.
(3)Abnormal people with osteoporosis.
(4)Having circulatory system obstacle (disease of heart,
blood-vessel, hypertension)
(5)Having difficulty in breathing.
(6)Using artificial pacemakers or implantable medical electronic
devices.
(7)Having malignant tumors.
ENEN
02 03

Prohibition
Do not dissemble the treadmill.
Avoid touching with water
◆Do not use or keep in damp places such as outdoors or near the
bathroom, or in places where water drops are caught.
◆Do not use or keep in places with direct sunlight such as
high-temperature places around the stove and heating appliances of
electric heating carpets.
——Otherwise, it's easy to cause electricity leakage, fire.
◆Do not use when the power cord or plug is damaged or the socket
is loose.
——Otherwise ,it's easy to cause electric shock, short circuit
and fire.
◆Do not damage or forcibly bend or twist the power cord . At the
same time, do not place heavy objects on it. Or not let the line
be clamped.
——Otherwise, it's easy to cause fire or electric shock.
◆Do not use it with two or more people at the same time. Do no let
the people around get close when using.
——Otherwise, it's easy to cause accident and injuries from
falls.
◆Do not use it if you can't express consciousness by yourself or
operation.
——It's likely to occur accident or injury.
◆Disassembly, repair or re-election are strictly prohibited.
——There is a risk of injury due to mechanical failure.
◆Do not spray water or other conductive liquid on main body or
operation part.
——It may cause electric shock and fire.
(8)Having thrombosis or serious dynamic environment tumor, acute
environment tumor and other blood circulation disorders or a variety
of skin infections and other symptoms.
(9)Having perceptual disabilities caused by diabetes and high
peripheral circulation disorders.
(10)Having skin injuries.
(11)Having a high fever (38℃or above) due to illness and so on.
(12)Having abnormal dorsal bones or crooked dorsal bones.
(13)Having pregnancy or possible pregnancy or menstruation.
(14)Feeling abnormal and have to rest
(15)Poor physical condition obviously
(16)Users for rehabilitation purposes.
(17)Feeling uncomfortable in a certain region of the body except
the above circumstances.
——It's likely to cause accident or poor health.
◆Please stop using immediately and consult your doctor when you
feel pain in your back, numbness in your legs, dizziness, abnormal
heartbeats and other body aches that are different from normal or
poor coordination or other abnormal feelings during exercise.
◆Do not allow children to use or play around the product.
——If not followed, there may be a risk of injury.
◆Do not allow children to play with this product for child protectors.
——If not followed, there may be a risk of injury.
◆Please make sure if there is person or pet around ( rear , lower
front) during using or taking out product.
◆Do not use in the state of shell cracked , detached ( internal
structure exposed) or weld detached.
——Otherwise, it's easy to cause accident or injuries.
◆Do not jump up or down during exercise
——It's likely to fall or cause injury.
ENEN
04 05

Prohibition
Never use it with wet hands
Pull out the power plug
Grounding instructions
Danger
◆Do not pull out or insert the power plug with wet hands.
——It’s likely to cause electric shock or injury.
◆The product must be grounded . Grounding provides the
channel with the least resistance to current to minimize the risk
of electric shock if the function of this machine does not work
normally.
◆This product is equipped with a grounded conductor and a plug
for the device. The plug must be properly installed, grounded
and plugged into an appropriate electrical outlet in accordance
with local codes or regulations.
◆There is a risk of electric shock if the device is not properly
grounded. Please contact an electrician to check if the grounding
of the product is correct, if the plug does not fit into the socket it
can not be changed. Please inform a qualified electrician with the
installation of a suitable socket.
◆This product has a grounding plug. Make sure that the product
is connected to an outlet of the same shape, this product can
not be used with an adapter socket.
◆Please be sure to pull the power plug from the socket during
maintenance.
——Failure to comply may result in electric shock or injury.
◆Please stop using it if the device does not start or runs abnormally.
Immediately pull out the power plug and entrust inspection and
repair.
Failure to comply may result in electric shock or injury.
◆Pull out the power plug immediately in case of power failure.
——Otherwise, an accident or injury may occur after the power is
restored.
◆Do not hold the cable tight. Hold the power plug to pull out the
plug.
——Otherwise, it may cause short circuit electric shock and fire.
◆Please pull out the power plug from socket when you don't use it.
——Dust and moisture will reduce the insulation performance and
cause leakage and fire.
◆People who don't usually exercise shouldn't suddenly do
strenuous exercise.
◆Do not use after eating or when you are tired. Especially after
exercising or when you are in an abnormal physical state.
——It may cause damage to health.
◆This product is suitable for the home use, do not use in the
school, the gymnasium and so on or for non-specific users.
——There would be injury risk.
◆Do not use when eating, drinking, or other activities.
◆Do not use it after drinking until you feel sluggish.
——it's easy to cause accident or injury.
◆Do not use it with something hard in your pants pocket.
——it's easy to cause accident or injury.
◆Do not use the power plug with needles, garbage or water.
——It may cause electric shock,short circuit and fire.
◆Do not pull out the power plug or switch the power switch to
"off" during use.
—It may cause injury.
ENEN
06 07

2. Exploded-Views
ENEN
3. Details of Exploded-Views
NO Name
Main frame welding parts
Riser welding parts
Handlebar welding parts
Motor fixed housing
Rhombic pad
Pull rod
Folding handle
Press spring
Front roller
Rear roller
Running board
Motor
Controller
Rivet
Moving wheels
Up protect cover
Down protect cover
Left side cover of protector
Right side cover of protector
Qty.
1 1
1
2
1
2
1
1
2
1
1
1
1
1
1
2
1
1
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
08 09

ENEN
NO Name Qty.
20 1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
139
140
Left tube
Right tube
Tube
Left tail housing
Right tail housing
Left tail housing cover
Right tail housing cover
Tail trim
Inner cover of left riser
Inner cover of right riser
Outer cover of left riser
Outer cover of right riser
Up cover of electronic meter
Down cover of electronic meter
Inner cover on left handle
Inner cover on right handle
Outer cover on left handle
Outer cover on right handle
Speaker shell
Bass film fixer
Phone bracket panel
NO Name Qty.
41 1
1
4
1
1
1
1
1
1
1
1
2
1
1
2
1
4
4
1
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
160
161
Phone bracket splint
Phone bracket back panel
Riser square plug
Riser round plug
Square spacer
Anti-dust board
Power switch2.0
Horn
Bass membrane
PCB panel
Sense block
3.2 wire clipper
6.4 wire clipper
sticker on electronic meter
Phone bracket pull spring
Safety lock flap
Adjustable feet pad
Running board EVA pad
Safety lock assembly parts
Running belt
Poly V-belt
10 11

4.Product Introductions
Phone bracket
Right handlebar
Right riser
Display window
Horn
Power socket
Power switch
Moving trundle
Folding handle
Right tail housing
Adjustable foot mat
Left handlebar
Running belt
Side edge
Left tail housing
ENEN
NO Name Qty.
62 5
2
2
4
2
3
6
1
4
2
6
31
2
8
13
10
6
2
2
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
281
282
STF2.2*4.5 bolts
STF 2.2*8 bolts
STF2.6*8 bolts
STF2.6*9.5 bolts
STF2.9*4.5 bolts
STF2.9*6.5 bolts
STF2.9*9.5 bolts
ST2.9*19bolts
STF3.3*9.5 bolts
ST3.5*13bolts
ST4.2*16 bolts
ST4.2M6 bolts
ST4.2**19bolts
ST4.2*22 bolts
ST4.2*22 bolts
ST4.2*30 bolts
M8*25 bolts
M8*10 bolts
M8*12bolts
M8*35 bolts
M8*35-10 bolts
Do notdissemble the treadmill.
Prohibition
NO Name Qty.
83 4
3
1
3
1
1
1
84
85
86
87
88
89
M8*45-10 bolts
M8*55 bolts
M8*105-10 bolts
M8 screws
M10 screws
Safety lock sticker
EVA single-sided adhesive tape
Safety lock
Left riser
Top protector
12 13

Packing list ：
Technical Parameters
Main body
Max load
Working voltage AC 220-240V 50~60Hz
120kg
Fold: 132. 5*68.5*11. 2cm
Unfold: 133.5*68.5*108. 4cm
100 x 40cm
0. 75HP
1.0-12. 0 Km/h
remote control
34kg
walking pattern / running pattern
Outsize
Running area
Peak motor power
Speed
Control method
Weight
Function
1
Left handlebar
Right handlebar
Spare parts package See table
No. Name Qty. Remark No. Name Qty. Remark
2
3
4
1
1
1
1
Spare parts list
ST4.2*22 bolts
M8*45 bolts
5mm internal
hexagonal wrench
folding handle force
adjustment
Manual qualification
certification
6mm internal
hexagonal wrench
open wrench
5mm socket wrench
Power wire
Safety lock
Methyl silicone oil
Phone bracket
Controller
1
2
3
4
5
6
7
8
9
10
11
12
2
4
1
1
1
1
1
1
2
1
1
1
fix phone bracket
fix left and right
others
adjust runing belt
others
ENEN
14 15

5.Installation procedure 6.Method for replacing fuse
7.Folding handle strength adjustment
Put the main body on the carpet or cushion as shown in the picture
after taking out from packing carton.
As shown in step 1, open the folding handle in the direction as shown
in the picture. Meanwhile the lower end of the riser will expand to
the two sides naturally. Raise the riser upward to the upper limit
position as shown in step2. Press ''folding handle" and
lock riser as shown in step3.
Fix "phone bracket” with two pieces ST4.2*22 bolts on riser beam
as shown in the step4 of right picture. Cut out 4 pieces "square
rubber plugs" as shown in the step5. Insert left and right handlebar
into the corresponding positions and lock them into the
corresponding screw holes of the handlebar through the riser with
two pieces M8*45 bolts. Put 2 pieces "square rubber plugs" back
into the previous square hole. And keep the remaining two pieces
by yourself as shown in step 7.
Put the "safety lock" into the corresponding position under the beam
of the riser as shown in step 8. Insert the power cord into the socket
of the power switch and install it.
Note: Please check again whether all bolts are locked after the
assembly of the machine.
Pull out the power plug from power socket as shown in step ①.
Remove the safety socket from the power socket with a straight
screwdriver as shown in step②. Take out the fuse according to the
direction shown in the picture, and insert it after replacing it.
Note: the machine fuse insurance tube specifications for
250V/10A, Φ5*20mm
ENEN
16 17

warm-up exercise
warm up for 5-10mins before each operation
Breathe
Frequency
8.Sports advice and guidelines
Load
Relax
Diet
Stretching exercise
The machine was set to a slightly more suitable level of tension
when finishing production, but due to the different personal wrist
strength, users can adjust the folding handle properly to their
own taste. Do not put it too loose, a loose play leads to a large
distance between the riser and the host of the folding position,
producing a jarring phenomenon. Cut out the round rubber
stopper at the bottom of the riser as shown in step①. Combine
the Allen key and the socket wrench to a labor-saving one levers
as shown in step②, insert the Allen key into the lower end hole of
the left riser and secure the hex nut. Clockwise rotation means
tight, otherwise it is a bit loose.
Do not hold your breath during operation. Normally prepare to
release action and inhale through the nose, exhale through the
mouth. The breathing should be coordinated with movement. If
the breathing is too rapid, the movement should be stopped
immediately.
Determine the amount of training according to the individual physical
condition, and then practice according to asymptotic load. It is
normal phenomenon for muscle soreness at the beginning of training.
As long as continue to practice, the soreness can be eliminated.
The reductive action should be done for 5mins after practicing every
time. Especially extend flabby for ministry muscle. Avoid long-term
coagulation of muscles and maintain muscle flexibility.
Do not eat at least 1 hour before training and half an hour after
training to protect your digest system. Do not drink plenty of water
to avoid increasing the burden on the heart and kidneys.
It is important to stretch before training, no matter how intense the
training will be. It is easier to stretch the muscles when they are
warm, warm up by running for 5 to 10 minutes and then stop and
stretch as follows 5 times for 10 seconds or more on each leg.
Continue to stretch even after training. Do it again after exercise.
The exercise of the same muscle should keep 48 hours of rest.
That is, only train the same area every 2 days.
ENEN
18 19

How to use the treadmill
9.Operating Instructions
1. Stretch down
Bent your knees slightly, then slowly bend your body to relax your
back and shoulders. And try to touch your toes with your hands.
Hold for 10-15 seconds, then relax. Repeat three times (see figure 1)
2. Hamstring stretch
Sit on a clean seat cushion and straighten one leg. Bring the other
leg in close to the inside of the leg.
Try to touch your toes with your hands. Hold for 10-15 seconds, then
relax.
Repeat 3 times for each leg (see figure 2)
3. Stretch the calf and hamstring
Stand with two hands on a wall or tree. One foot is behind. Keep
your hind legs straight and on your heels, leaning against a wall or
tree. Hold for 10-15 seconds. And then relax.
Repeat 3 times for each leg.(see figure 3)
4. Quadriceps stretch
Keep balance with left hand to hold the wall or table. Then extend
your right hand backward.
Hold your right ankle and slowly pulling toward your hips until you
feel tension in front of your thighs muscles. Hold for 10-15 seconds,
then relax. Repeat 3 times with each leg (see figure4)
5. Sartorius muscle (muscle of the inner thigh) stretch
Sit with your feet facing each other and knees facing out. Grab both
feet with both hands and put toward the groin. Hold for 10-15
seconds. Then relax, repeat 3 times (see figure 5)
The remote control and treadmill pairing instructions
1.Turn on the power and check if the machine is working
normally.
2. Hold the remote control and aim it at the display window of the
treadmill (as shown in FIG. 2) within 10 seconds after unplugging
the treadmill security lock (as shown in FIG.1).
Meanwhile, press the start/pause button on the remote control for
about 3 seconds, and the system will sound "didi...", indicating that
the remote control and treadmill have been successfully paired, and
the remote control can be used to control the treadmill normally.
1.Power on, check and confirm if the machine work.
2.This machine is set with walking mode and running mode.
When the riser is folded (the riser is parallel to the running platform)
it is in walking mode. In the walking mode, the speed of the running
belt is 1-4 Km/h. Remove the left and right handlebar and plug the
square rubber stopper when using the walking mode. It is in the
running model when the riser is in the expansion state. In the
running mode, the speed of running belt is 1-12 Km/h.
3.The safety lock should be clipped on the user's clothes.
4.It is necessary to check the stability and function of the treadmill
before exercise. It is strictly prohibited to start the treadmill by
standing on the running belt. You should stand on the side strip
before it normally works. One hand grab the handlebar, the other
hand press the "start/stop" keys. When power on, treadmill starts up
in a delay of 3 seconds and runs at a speed of 1Km/h. Press "speed
+"and motor speed will rise to reach a speed of 2.5-3.5 Km/h (This is
the most comfortable speed for learning running). Hold the
handlebar with both hands and step on the running belt with both
feet successively which will reach the same speed with the running
belt soon.
figure 2
Display window
Star/Stop
Speed
figure 1
ENEN
Safety lock
20 21

Display window and button description
Start instructions
Safety lock function
Power saving mode
5.You can increase the speed of running after a few minutes.
Press the "speed +"button on the upper display to increase the
speed slowly. You can also press the "speed -"key to slow it down.
6.In the process of movement, you can press the key "Start/Stop”
of the upper display to make the motor stop running anytime.
You can hold the phone in the phone holder and then play the
phone music after connecting via Bluetooth.
Note: When the safety key is pulled off, the treadmill will
immediately stop during exercise. The display will stop all
functions and shows E07.
Display window
Current Speed
START/STOP 1-12KM/H Display Speed SPEED +
SPEED -
1.Fix the safety key in the position provided under the display. Turn
the power switch on and the buzzer will sound, then the manual
mode will be activated.
2.Press the start button, the time window displays a countdown of
3seconds. One beep per second indicates the countdown. The motor
then starts.
3. Starting speed: 1Km/h, press speed + and - to adjust the speed.
4. Timing operation can be performed in normal mode, and the
speed is fixed and can be adjusted manually.
Pull off the safety lock in any state, the window displays "E07" and
the buzzer beeps three times.
The motor will stop immediately if the motor is working.
You can't start again when the safety lock falls off.
This system has a power saving function. The system will enter the
power saving mode if there is no keystroke command within 10mins
in the standby state, the display will automatically turn off,
and it can be woken up when any key is pressed.
2. Display Functions Buttons: Start/Stop, Speed increasement
/Speed decreasement
A: "START/STOP": START the treadmill in stopping state, STOP the
treadmill in running state. Press the STOP key to slowly stop in the
running state.
B: "SPEED +": Speed increase key, it is the speed increase key in
the running state;
C: "SPEED -": Deceleration key, it is the deceleration key in the
running state;
1. LED window displays the following functions：
Time/speed/distance/calorie window: 5 seconds to switch
display time, speed, distance and calorie data. Time display
range:0:00-99:59, distance display range:0.00-99.99, speed
display range 1-12, Calorie display range:0.00-999.9
ENEN
22 23

10. Common failures and processing method
Advice:
★1 hour or less per week
★Less than 3 hours per week
★3-6 hours per week
lubricate once every 6 months
lubricate once every 3 months
lubricate once every 2 months
11. Product maintenance
please contact our after-sales service if you have any other questions
Error messages on electronic meter and elimination methods
Questions
E01
E02
E03
E04
E05
E06
E07
poor communication
power assault
Non-sensing signal
overload protect
Possible Cause Maintenance Methods
safety lock drop
external disturbance
system self-check
failed
The signal line is not plugged.
Plug it again
power tube breakdown,
replacement of electronic control
sensing wire is not plugged in
properly. Plug it again correctly
overload, replace controller
or motor
overload,replace contoller
system failure, replace controller
put the safety lock in
correct position
turn off power switch, turn it on
after one minute
abnormal
display
controller or motor
abnormal
treadmill
don't work
the running
belt doesn't
run smoothly
running belt
slipped
Possible Causes
Put the power switch
in“ON" position
put the safety lock in
correct position
check the controller input
terminal and signal circuit
replace fuse
put plug to insert socketnot connected
power is not turned on
the fuse blew out
insufficient lubrication
running belt is too tight
running belt too loose
running belt is too tight
add silicone oil lubricant
adjust running belt tightness
adjust running belt tightness
adjust running belt tightness
circuit signal system
break
safety lock drop
Maintenance Methods
1. Lubrication
When the running machine is used for a period of time, it must be
lubricated with special methyl silicone oil.
2. As for the way to check if you need to add lubricant.
Just grab the running belt and touch the middle of the
running belt back with your hands as much as possible.You
don't need to add lubricant if you have silicone on your hand
(a little damp). You have to add lubricant if the pad is dry
and there is no silicone on your hand.
More than 6 hours per week lubricate once a month. Do not
lubricate too much. It is not the more lubricants the better.
Remember: Proper lubrication is an important factor in improving
the life of the treadmill.
★Steps to add lubricant to the running
plate (as shown in the right picture)
★Stop running and fold the machine.
★Lift the running belt of the underside of
the main body. Put the oil pot as far as
possible into the middle of the running
belt. And spray methyl silicone oil inside of
the running belt and both sides.
★You can make use of the treadmill speed
of 1km/h to evenly lubricate and step on
the running belt from left to right. After a
few minutes, the methyl silicone oil can be
completely absorbed by the running belt.
ENEN
24 25

Please adjust left bolt with
clockwise or right bolt with
counterclockwise if running
belt deviates to the left.
Please adjust right bolt with
clockwise or left bolt with
counterclockwise if running
belt deviates to the right.
3. Adjust tightness of running belt
All treadmills shall be adjusted for tightness before delivery and
after installation. However, the running belt may be loosened after a
period of use. For example,the treadmill has problems with stopping
and slipping during exercise. Adjust bolts of running belt with the
left and right synchronous as per clockwise direction to half a circle
as the unit when this phenomenon occurs. The feet will slip if the
running belt is too loose. But it is not good to be too tight. It is easy
to increase the load of the motor and damage the motor, running
belt and roller etc.
4. Running belt deviation adjustment
All treadmills need to adjust the running belt before delivery and
after installation. But the running belt may be deviated after a
period of use which may be caused by the following reasons:
①The main body is not placed smoothly.
②The feet of users are not in the center of the running belt.
③Uneven force on the user's feet.
It will be returned to normal after a few minutes of no-load
rotation if deviation is caused by man-made. It should be
adjusted with 6mm wrench at a half circle as the unit for
deviation of non-recover automatically.
The running belt deviation is mainly maintained by the user according
to the manual. Running belt deviation will seriously damage the
running belt.This point must be found in time and corrected at once.
5. Adjustment of motor belt
All treadmills have been adjusted for the motor belt before and
after installation, but they may still be out after a period of use.
For the phenomenon of loose, slip, mainly need the user to
adjust by yourself.
Adjustment steps:
①Adjust the parallelism of the motor with a wrench. Turn the
bolt half a turn counter clockwise.
②Turn the belt tightening bolts clockwise half a circle.
NOTE: clean belt and pulley grooves regularly.
ENEN
Motor balance
adjustment bolt
Front roller
Motor belt
Motor
Belt tension bolt
26 27

Gymax App iOS/Android with Gymax platform provides users the
control of sports intelligent device, sports data recording, sports
mall, dynamic sharing in community, system settings and other
functions.
Retrieve Password
If E-mail users forget Passwords, users can click "Forget Password"
on the mailbox login interface to jump to the Password retrieval
interface, and then reset Passwords.
Edit Information
In the personal information interface, clicking the avatar, users can
edit the avatar and upload the avatar by choosing album or camera.
This document is applicable to the Android version and iOS version of
the official APP of Gymax.
For the convenience of users, Gymax
provides three login methods: Facebook
and E-mail, and iOS users can also sign
in with Apple. Users can quickly sign in
to the Gymax App and use it.
Sign In
Sports Scenes
Sports Mall
Community Dynamic
Settings
Sign in Process
The Main functions
Functions Overview
Gymax App Instruction Manual
ios: Search Gymax in App Store to download
Android: search and download from Google Play store
ENEN
28 29

Sports Scenes
Connecting services
On the home page, users can freely choose the device type to
connect. After connecting successfully, then user can select the
device page, such as the "Treadmill" interface.
Starting exercise
Selecting the device page, such as "Start" on the "Treadmill"
interface, users enter the running free, as shown below:
1.Waiting for Gymax to automatically connect to the treadmill.
3. The Gymax App synchronizes exercise data, such as distance,
time, calorie, and speed. As users run on the treadmill, they can
start and stop the treadmill. And they can increase and reduce the
speed. The APP directly shows the user's sports ranking and the
number of online users.
2.When the connection status sign is lit, it means that the APP
has successfully connected to the treadmill. Users click ,then the
treadmill starts running and enters the countdown.3.2.1 GO.
ENEN
30 31

4. When users finish the exercise, the Gymax App will show users'
total running distance. Sports Plan Users can click "Add More Training Plans" to add users' own sports
plans.
Setting Goals
1. Users can set suitable sports goals.
5. Users can share the sports data to the community or save it to
the phone album.
ENEN
32 33

2. When the goal is reached, the exercise automatically ends.
Training Course
1. Users can select courses in the interface of training course.
2. And then start training with a fitness coach.
Exercise Record
The user can view the exercise data record in the device page.
(me-exercise data)
ENEN
34 35

Sports Mall
Users can purchase satisfied sports devices.
Community dynamic
1.In sports community, users
can share dynamic
communication with each other.
2. Users can
comment dynamics
in community.
3. Users can post
dynamics. 4. Users can remove the released dynamics
in Me-My Dynamic.
ENEN
36 37

Settings
System Settings
Users can click "Me" to enter the set up,
including unit, feedback, terms of agreement,
privacy agreement and clear cache, etc.
Users can clean up the system
cache according to users' needs,
including Gymax App H5 web page
load cache and image load cache.
Users can submit suggestions
and the problem for improving
the product.
Unit settings (metric or
imperial standard)
Feedback
Clear Cache
ENEN
38 39