Costway SP37860US User manual

SP37860US
Folding Treadmill
Tapis Roulant Pliable
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
USA office: Fontana AUS office: Truganina GBR office: Ipswich FRA office: Saint Vigor d'Ymonville

EN
Before You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the area in
which they will be placed in use, to avoid moving the product unnecessarily once
assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from babies
and children as they potentially pose a serious choking hazard.
EN
FR
Veuillez lire attentivement toutes les instructions.
Conservez les instructions pour vous y référer ultérieurement.
Vérifiez toutes les pièces et les accessoires.
Lisez attentivement chaque étape et suivez l’ordre correct.
Nous recommandons que, dans la mesure du possible, tous les produits
soient assemblés à proximité de la zone où ils seront utilisés, afin d’éviter tout
déplacement inutile du produit une fois assemblé.
Placez toujours le produit sur une surface plane et stable.
Conservez toutes les petites pièces de ce produit et les matériaux d’emballage
hors de portée des bébés et des enfants, car ils pourraient présenter un risque
d’étouffement.
Avant de Commencer
1. Safety Precautions & Warning Instructions
Notice: Please read the instructions carefully before use, and pay
attention to the following safety precautions:
◆The treadmill is suitable to be placed indoors to avoid dampness,
water should not be splashed on the treadmill, and any foreign
objects should not be placed.
◆Before exercising, please wear suitable sports clothes and sports
shoes. It is strictly forbidden to exercise on the treadmill with bare
feet, and stretch the whole body.
◆The power plug must be grounded reliably, and the socket must
have a dedicated circuit to avoid sharing with other electrical
equipment.
◆Children should keep away from the machine to avoid accidents.
◆Excessive long-term overload operation should be avoided,
otherwise the motor and controller will be damaged, and the wear
and aging of bearings, running belts and running boards will be
accelerated, and regular maintenance should be done.
◆Reduce indoor dust, maintain a certain humidity in the room, and
avoid strong static electricity, otherwise it may interfere with the
normal work of electronic meter and controller.
◆Please turn off the power of the treadmill after exercise.
◆Please keep indoor air circulation when using the treadmill.
EN
02 03

◆When exercising, please clip the safety lock cable clip to the
clothes to prevent safe shutdown in case of emergency.
◆If you feel uncomfortable or abnormal during use, please stop
exercising and consult a doctor.
◆After using the silicone oil, it must be stored in a place out of the
reach of children, so as to avoid serious consequences caused by
accidental ingestion.
◆The safe area behind the treadmill is 1000x2000mm (40” x 79”).
◆Emergency jump off: While holding the handrail with both hands
to support the body, step on the strake side, jump off the treadmill
from one side.
WARNING: To reduce accidents or injury to others, please
observe the following:
◆Please check whether the clothing is buttoned or zippered before
using the treadmill.
◆Do not wear clothes that are easily caught by the treadmill.
◆Do not place the power cord near hot objects.
◆Do not allow children to approach the treadmill.
◆Do not use the treadmill outdoors.
◆The power must be cut off before moving the treadmill.
◆Non-professionals are not allowed to open the upper protector
and left and right tail housing without authorization.
◆Only one person can exercise on the treadmill when the machine
is started.
◆If you feel dizziness, chest pain, nausea, or shortness of breath
during exercise, please stop exercising immediately and consult a
fitness trainer.
(2) Those who have deformed arthritis, rheumatism and gout.
(3) Those with abnormalities such as osteoporosis.
(4) Those with circulatory system disorders (heart disease, vascular
disorders, hypertension, etc.).
(5) Those with respiratory disorders.
(6) Those who are using artificial heart rhythm regulators or who have
implanted internal medical electronic devices.
(7) Those with malignant tumor.
(8) People with thrombosis, severe lipoma, acute static lipoma and
other blood circulation disorders or various skin infections.
(9) Persons with perceptual impairment caused by high peripheral
circulatory disorder caused by diabetes, etc.
(10) Those with trauma to the skin.
(11) Those who have a high fever (38°C/100.4°F or more) due to
illness, etc.
(12) Those with abnormal back bones or curved back bones.
(13) Those who are pregnant or may be pregnant or are menstruating.
(14) Those who feel abnormal in their body and need to rest.
(15) Those who are obviously in poor physical condition.
(16) Users for rehabilitation purposes.
(17) In addition to the above-mentioned situations, those who feel that
there is an abnormality in their body.
- May cause an accident or poor physical condition.
◆If you feel lower back pain, numbness in legs and feet, dizziness,
heartbeat, etc. different from the usual pain or coordination sensation
or abnormality in the body during exercise, stop using it immediately
and consult a doctor.
◆Do not let children use this product, and do not let children play
around this product.
- Risk of injury if not followed.
◆Children's protectors should be careful not to let children play with
this product.
- Risk of injury if not followed.
◆Be sure to confirm that there are no people or pets around (the
back, bottom, and front of the product) during use, when loading and
unloading the product, or when sliding it.
◆Be sure to consult a specialist before using it when you are being
treated by a doctor or the following patients.
(1) Those who are currently suffering from back pain or those who
have been injured in the legs, waist, and neck in the past, and those
who have numbness in the legs, waist, neck and hands (those with
chronic diseases such as intervertebral disc herniation,
spondylolisthesis, cervical spine herniation, etc.).
Warning! Enforcement!
04 05

◆Do not use in a state where the casing is cracked, or detached
(internal structure is exposed) or the welded part is detached.
- Otherwise an accident or injury may occur.
◆Do not jump up or down during exercise.
- May cause injury due to falling.
◆Do not use or store in damp places such as outdoors or near
bathrooms or places exposed to water droplets.
◆Do not use or store it in high temperature places such as around
the stove in direct sunlight, or on the top of heating appliances such
as electric heating carpets.
-Otherwise, it may cause electric leakage, fire.
◆Do not use when the power cord or power plug is damaged or the
socket is loose.
-Otherwise it may cause electric shock, short circuit and fire.
◆Do not damage or forcibly bend or twist the power cord. At the
same time, do not place heavy objects on it, and do not cause the
wire to be pinched.
- Otherwise, fire or electric shock may result.
◆Do not use it with 2 or more people at the same time, and be
careful not to make people around you approach it during use.
- Otherwise, accident or injury may occur due to falling.
◆Do not use it if you lose consciousness or you can't operate it
yourself.
- Accident or injury may occur.
◆Dismantle, self-repair and re-selection are strictly prohibited.
- Risk of injury due to mechanical failure.
Prohibition!
Do not disassemble!
◆Do not spray the main body or operation part with water or other
conductive liquid.
- May cause electric shock and fire.
Avoid contact with water!
◆People who don't usually exercise should not suddenly do
intense exercise.
◆Do not use it after eating, when you are tired, when you have just
exercised or when your physical state is abnormal.
- May cause damage to health.
◆This product is suitable for home use, not for a large number of
unspecified users such as schools and gymnasiums.
- There is a risk of injury.
◆Do not use it while eating or doing other activities.
◆Do not use if you feel heavy-headed after drinking .
- Accident or injury may occur.
◆Do not use it when you have hard objects in the pocket.
- May cause accident or injury.
◆Do not allow needles, garbage or moisture to adhere to the power
plug.
- May cause electric shock or short circuit, fire.
◆During use, do not pull out the power plug or switch the power
switch to "off".
- May cause injury.
Prohibition!
◆Do not pull out or insert the power plug with wet hands.
- May cause electric shock and injury.
Never use with wet hands!
◆When not in use, unplug the power supply from the socket.
-Due to dust and moisture, the insulation will deteriorate, resulting in
leakage fire.
◆Be sure to pull out the power plug from the socket during
maintenance.
- Failure to comply may result in electric shock or injury.
◆If it does not start or feels abnormal, stop using it, immediately
pull out the power plug and entrust an inspection and repair.
- Failure to comply may result in electric shock or injury.
Pull out the power plug!
06 07

◆In the event of a power failure, pull out the power plug
immediately.
- Otherwise, accident or injury may occur when power is restored.
◆When pulling out the power plug, do not hold the wire part, but
pull out the power plug.
- Otherwise, it may cause short circuit, electric shock and fire.
◆The product must be grounded. In the event of a malfunction of
the unit, grounding will provide the path of least resistance for
electrical current to reduce the risk of electric shock.
◆This product is equipped with a wire with an equipment grounding
conductor and a grounding plug. This plug must be inserted into a
suitable outlet that is properly installed and grounded in full
compliance with local codes or ordinances.
Grounding Instructions!
◆If the grounding conductor of the equipment is not properly
connected, it will cause electric shock. If you are in doubt about the
correct grounding of this product, please entrust a professional
electrician to check it. Even if the plug included with this product
does not fit the socket, it cannot be modified. Ask a professional
electrician to install a suitable outlet.
◆This product has a grounding plug. Make sure the product is
connected to a socket with the same shape. Socket adapter cannot
be used with this product.
Danger!
2. Product Introduction
Display Screen
Safety lock
Holding
heartbeat tablet
Extension tube
Left riser
Table Holding heartbeat tablet
Cover for handrail tube
Handrail
Extension tube
Drink holder
Right riser
Upper
protector
Running belt Strake Right tail
housing
Left tail housing
No. Description Qty.
1
2
1
1
Main body
Spare parts packing
Packing List
08 09

1) Take the machine out of the packing box
and place it flat on the carpet or cushion.
As shown in step ①, use ratchet wrench to
loosen the screws under the left and right
risers by 2-4 turns counterclockwise.
2) As shown in step ②, lift the riser up to the limit point and hold the
riser with one hand.
As shown in step ③, tighten the screws under the left and right
risers clockwise with ratchet wrench.
3) As shown above, rotate the handrail tube assembly to a
horizontal position by hand (pay attention to the communication line
in the right riser to prevent extrusion). As shown in step ④, Use two
"M8x12mm" hex socket pan head screws and two φ8.5mm flat
washers to fix the electronic meter stand on the left and right risers,
and tighten with ratchet wrench. As shown in step ⑤, adjust the
electronic meter to a proper position. As shown in step ⑥, place the
red safety lock in the yellow area below the display screen.
Working Voltage
Maximum Load
Folding Size
Expanding Size
Running Area
Motor Power
Speed
Control Mode
Machine Weight
Noise
AC110V 50/60Hz
265LBS
55”x26.5”x5”
55”x26.5”x37”~49.5”
16.5”x43.5”
3 HP
0.6-8.6 mph
Electronic meter
87 lbs
≤75 dB
Technical Specification
Spare Parts List
No. Description Qty. Remark
Adjust the running belt
M8x12mm Hexagon socket
pan head screws
M4x4mm Cross pan
head screws
φ8.5mm Flat washer
Ratchet wrench
5mm Allen wrench
6mm Allen wrench
Solid wrench
Power cord
Safety lock
Methylsilicone oil
Drink holder
User’s manual, Qualification
1
2
3
4
5
6
7
8
9
10
11
12
2
2
2
1
1
1
1
1
1
2
1
1
Other use
Fix the drink holder
Fix the electronic meter
and extension tube
3. Installation Procedure
10 11

4) Install drink holder. As shown in step ⑦, install
the drink holder on the right riser, and secure it
with two "M4x4mm" cross pan head screws.
5) As shown, after the installation is
completed, you can put the ratchet
wrench in the pocket under the table
to facilitate the next adjustment of the
treadmill. (Note: the pocket mouth
must stick well to avoid the ratchet
wrench falling off during use)
After the installation, switch on the power supply and turn on the
power switch below the front end of the machine to enter the
standby state.
Note: After assembly, please check again if all screws are tightened
securely.
Riser extension adjustment: As shown in step ①, loosen the screws
on the left and right risers 3-5 turns counterclockwise with the
ratchet wrench; As shown in step ②, push the handrail tube and
table assembly up or down, with a total of 6 positions to adjust, and
adjust the left and right risers to the same scale position as required.
As shown in step ①, use the ratchet wrench to tighten the left and
right extension tubes. (The scale value is the distance from handrail
to running platform)
1) If there are items on the table, please take them away first to
avoid falling; As shown in step ①, use the ratchet wrench to
unscrew the "M8*12mm" screws on the left and right extension
tubes, grasp the handrail tube and slowly put the handrail tube and
the display screen down in line with the riser. (Note: the screws and
washers removed should be preserved for next installation)
6) If the ground is uneven or the
treadmill is wobbling, please
adjust the four adjustable foot
pads at the bottom to the
appropriate position.
Riser height adjustment
Folding Instruction
12 13

Warm up
There should be 5-10 minutes of warm-up exercise before each
operation.
Breathe
Do not hold your breath during operation. In general, inhale through
your nose and exhale forcefully through your mouth when you are
preparing to restore the movement. Breathing and movement should
be coordinated. If your breathing is too rapid, you should stop
exercising immediately.
Frequency
There should be a 48-hour break for the exercise of the muscles of
the same part, that is, the same part can only be trained every other
day.
Load
Determine the amount of training according to your physical fitness
status, and then practice according to the principle of gradual load. It
is normal for muscle soreness during the initial training. As long as
you continue to practice, the soreness can be eliminated.
Relax
Do 5 minutes of restoring exercises after each exercise, especially
the stretching and relaxation of the foot muscles, so as to prevent
the muscles from coagulation during the period and maintain the
elasticity of the muscles.
Diet
In order to protect the digestive system, you can exercise only one
hour after a meal, and you should eat at least 1 hour after training.
Drink less water during exercise, especially avoid drinking a lot of
water, so as not to increase the burden on the heart and kidneys.
2) As shown in step ②, loosen the screws under the left and right
risers 3 to 5 turns counterclockwise with the ratchet wrench.
3) As shown in step ③, place the whole riser slowly down the
running platform.
4) As shown in step ④, tighten the screws under the left and right
risers clockwise with the ratchet wrench. The installation is
completed.
4. Exercise Suggestions & Guidelines
14 15

No matter what speed you are walking at, it is best to do stretching
exercises first. Warm muscles are easier to stretch, so first walk for
5 to 10 minutes to warm up. Then stop and do the stretching
exercises 5 times --- as follows, each leg for 10 seconds or more
each time; do it again after the exercise is over.
Stretching Exercises
12
34
5
1.Toe Touch
Bend your knees slightly, slowly bend your body forward, relax your
back and shoulders, and try to touch your toes with your hands.
Hold for 10-15 seconds, then relax. Repeat 3 times (see Figure 1).
2. Hamstring Stretch
Sit on a clean seat cushion and straighten one leg. Tuck the other
leg inward so that it is close to the inside of the straight leg. Try to
touch your toes with your hands. Hold for 10-15 seconds, then relax.
Repeat 3 times for each leg (see Figure 2).
3. Calf-Achilles Stretch
Standing on the wall with two hands, one foot behind. Keep your
hind legs upright and your heels on the ground, leaning toward the
wall. Hold for 10-15 seconds, then relax. Repeat 3 times for each
leg (see Figure 3).
4. Quadriceps Stretch
Hold the wall with your right hand for balance, then stretch your left
hand back, grab your left ankle and slowly pull it toward your
buttocks, until you feel the muscles in front of your thighs tense.
Hold for 10-15 seconds, then relax. Repeat 3 times for each leg (see
Figure 4).
5. Inner Thigh Stretch
Sit with the soles of your feet facing each other with your knees
facing out. Grasp the feet with both hands and pull towards the
groin. Hold for 10-15 seconds, then relax. Repeat 3 times (see
Figure 5).
5. Operating Instruction
● Display & Key Instruction
Main Window
Heart rate/ Step count window [speed required
to reach 2.6km/h (1.6mph), step display]
Setting Keys
16 17

1) Setting Keys
Including 4 keys: “SMART”, “BACK”, “SET”, “NEXT”
Short press in stop or pause state to switch running mode.
Free run -> Countdown -> Countdown distance -> Countdown
calories ->P1->P2->P3... ->P25-> Free run.
● Key Function Instruction
SMART:
2) Key Operation
Including 9 keys: “PAUSE/RESUME”, “3”, “5”, “-”, “+”, “START”,
“STOP”, “ ”, “ ”.
Time Countdown Setting Interface: Add and subtract the countdown
time;
Distance Countdown Setting Interface: Add or subtract the
countdown distance;
Calories Countdown Setting Interface: Add or subtract the
countdown calories;
Parameter Countdown Setting Interface: Add or subtract the
countdown parameter;
Other setting interface is used for volume adjustment.
BACK, NEXT：
Parameter setting
SET:
Pause/Resume: Short press to pause or resume running
Speed 3: Short press during running and adjust the speed to 3
(Km/h or Mile/h). If the maximum speed limit is exceeded, the
adjustment is ineffective
Speed 5: Short press during running and adjust the speed to 5
(Km/h or Mile/h). If the maximum speed limit is exceeded, the
adjustment is ineffective
Speed -: Short press or long press during running, the speed
decreases. If the minimum speed limit is exceeded, the adjustment
is ineffective
Speed +: Short press or long press during running, the speed
increases. If the maximum speed limit is exceeded, the adjustment
is ineffective
Start: Short press to start the treadmill in the stop or pause state
Stop: Short press to stop the treadmill during running
Loop/Lock Display: Short press to switch loop/lock display during
running
Normal/Walk Mode: Long press to switch to normal/walk mode,
the speed interface will be displayed for 5 seconds after the
switching the mode. If the speed is preceded by L, it indicates
walking mode (low speed mode); otherwise, it is normal mode
18 19

Bluetooth Connection
Turn on your phone's Bluetooth, search for treadmill Bluetooth Audio
(EsangAudio), and click to connect to the treadmill.
Safety Lock Function
In any state, pull the safety lock, the screen displays "E07", and the
buzzer rings “BI-BI-BI”. If the motor is running, the motor stops in an
emergency. Do not start the machine when the safety lock is off.
If you have any other questions, please contact our customer
service.
Problem
Treadmill
does not work
Running belt
does not run
smoothly
Running belt
skidding
Possible Causes Method
No power Plug into socket
Turn on the power switch
Put the safety lock into the
lock position
Check the controller input
terminal and signal line
Add methyl-silicone oil
lubricant
Adjust the tightness of the
running belt
Adjust the tightness of the
running belt
Adjust the tightness of the
motor belt
Replace the fuse
Power is not turned on
Safety lock is not in place
Circuit signal system
cut out
Blown fuse
Insufficient lubrication
Running belt is too tight
Running belt is too loose
Motor belt is too loose
6. Troubleshooting
20 21
Parameter Adjustment
1. Enter the Parameter Setting Interface
Remove the safety key and long press to enter parameter setting
interface. Then the heart rate window shows Uxx, and the main
display window shows parameters.
2. Parameter Switching
After entering the parameter setting interface, short press the
Setting key to switch parameters
3.User’s Parameter Instruction
Parameter 2: Display brightness, 1 Darkest -> 5 Brightest
Parameter 3: Buzzer volume, 1 Lowest -> 5 Loudest
Parameter 6: Metric or imperial unit exchange, 0 Metric Unit -> 1
Imperial Unit
Parameter 7: Accumulated miles
Parameter 9: Audio Bluetooth settings (Press “BACK” to turn on/off
the Bluetooth; Press “NEXT” to disconnect/connect the Bluetooth)
Note: Except the above parameter 2, 3, 6, 7, 9, other parameters
are fixed values, do not adjust them.
Long press the Setting key to save and exit the parameters.

1. Lubrication
After the running belt has been used for a period of time, it must be
lubricated with a specially configured methyl-silicone oil.
Do not over-lubricate, the more lubricant is not the better.
Remember: Reasonable lubrication is an important factor in
improving the service life of the treadmill.
2. As for the way to check whether you need to apply lubricant
again, just grab the running belt and touch your hand to the center
of the back of the running belt as much as possible. If your hands
are stained with silicone (somewhat moist), it means that no more
lubricant is needed. If the running board is dry and there is no
methyl-silicone oil in the hands, you need to add lubricant.
★The steps to apply lubricant to the
running board: (as shown in the
picture);
★Stop the running belt and fold the
machine;
★Lift up the running belt on the
bottom, extend the oil into the
middle of the running belt as much
as possible, spray methyl-silicone oil on the inner side of the running
belt, and coat both sides of the running belt with methyl-silicone oil;
★Use the speed of 1km/h (0.6mph) to run the treadmill to evenly
apply the methyl-silicone oil, and lightly step on the running belt from
left to right, and the methyl-silicone oil can be completely absorbed
by the running belt after about a few minutes.
Error messages on electronic meter and elimination methods
Problem
E01
E02
E03
E04
E05
E06
E07
Possible Cause Method
Display
Abnormal
Bad communication
No sensor signal
Controller or motor
abnormal
Overload protection
System self-check
failed
Safety lock is not in
place
External interference
The signal line is not plugged in, plug
it in again
Check whether the motor wire is
loose or falls off. If not, check
whether the carbon brush of the
motor is worn out. If the motor is
worn out, replace the motor.
The motor wire is
loose or falls off.
Whether the carbon
brush is worn out
The sensor line is not plugged in
properly, plug it in again
Overload, replace the controller and
motor
Overload, replace the controller
System failure, replace the controller
Put the safety lock into the lock
position
Turn off the power switch, and then
power on again after 1 minute
7. Product Maintenance
Less than 3 hour per week
Less than 4~7 hours per week
More than 7 hours per week
Lubricate once every 5 months
Lubricate once every 2 months
Lubricate once every month
Advice:
22 23

5. Adjustment of the motor belt (as shown below)
All treadmills have been adjusted before leaving the factory and
after installation, but there may be slack and slipping after a period
of use, which is mainly adjusted by the user.
Adjustment steps:
① Use a wrench to turn the Motor balance adjustment bolt
counterclockwise by half a turn.
②Turn the Belt tension bolt half a turn clockwise.
Note: Clean the belt and pulley groove regularly.
3. Adjust the tightness of the running belt. All treadmills need to be
adjusted before leaving the factory and after installation, but there
may be slack after a period of use. Such as: the user pauses and
slips when running. When this phenomenon occurs, adjust the
running belt adjustment bolts in a clockwise direction with a half
circle as the unit, left and right synchronously. If the running belt is
too loose, the running belt and the roller will make your feet slip, but
too tight is not good, and it is easy to increase the load of the motor
and damage the motor, running belt and roller.
4. Running belt deviation adjustment
All treadmills must be adjusted before leaving the factory and after
installation. However, after a period of use, it may still run deviation.
The reasons for the phenomenon are as follows:
① The machine is not stable;
②The user's feet are not in the center of the running belt when
exercising;
③Uneven force of the user's feet.
The deviation caused by man can be restored to normal after a few
minutes of no-load rotation. For deviations that cannot be
automatically restored, the random 6mm Allen key should be used
to gradually adjust the deviation in half-turn units.
Loosen
Loosen
Tighten Tighten
Loosen
Loosen
Tighten
Tighten
If the walking belt deviates to the left: adjust the left bolt clockwise or
adjust the right bolt counterclockwise.
If the walking belt deviates to the right: adjust the right bolt clockwise
or adjust the left bolt counterclockwise.
Tips: It is mainly maintained by the user in accordance with the
manual. The running belt deviation will seriously damage the
running belt. It must be discovered and corrected in time.
Motor balance
adjustment bolt
Front roller
Motor belt
Motor
Belt tension bolt
24 25

Gymax App iOS/Android with Gymax platform provides users the
control of sports intelligent device, sports data recording, sports
mall, dynamic sharing in community, system settings and other
functions.
This document is applicable to the Android version and iOS version
of the official APP of Gymax.
For the convenience of users,
Gymax provides three login
methods: Facebook and E-mail, and
iOS users can also sign in with
Apple. Users can quickly sign in to
the Gymax App and use it.
Sign In
Sports Scenes
Sports Mall
Community Dynamic
Settings
Sign in Process
The Main functions
Functions Overview
Gymax App Instruction Manual
ios: Search Gymax in App Store to download
Android: search and download from Google Play store
Retrieve Password
If E-mail users forget Passwords, users can click "Forget Password"
on the mailbox login interface to jump to the Password retrieval
interface, and then reset Passwords.
Edit Information
In the personal information interface, clicking the avatar, users can
edit the avatar and upload the avatar by choosing album or camera.
26 27

Sports Scenes
Connecting services
On the home page, users can freely choose the device type to
connect. After connecting successfully, then user can select the
device page, such as the "Treadmill" interface.
Starting exercise
Selecting the device page, such as "Start" on the "Treadmill"
interface, users enter the running free, as shown below:
1. Waiting for Gymax to automatically connect to the treadmill.
3. The Gymax App synchronizes exercise data, such as distance,
time, calorie, and speed. As users run on the treadmill, they can
start and stop the treadmill. And they can increase and reduce the
speed. The APP directly shows the user's sports ranking and the
number of online users.
2. When the connection status sign is lit, it means that the APP
has successfully connected to the treadmill. Users click ,then the
treadmill starts running and enters the countdown.3.2.1 GO.
28 29

Sports Plan
Users can click "Add More Training Plans" to add users' own sports
plans.
Setting Goals
1. Users can set suitable sports goals.
30 31
4. When users finish the exercise, the Gymax App will show users'
total running distance.
5. Users can share the sports data to the community or save it to the
phone album.

2. And then start training with a fitness coach.
Exercise Record
The user can view the exercise data record in the device page.
(me-exercise data)
2. When the goal is reached, the exercise automatically ends.
Training Course
1. Users can select courses in the interface of training course.
32 33

Sports Mall
Users can purchase satisfied sports devices.
Community dynamic
1.In sports community, users can
share dynamic communication
with each other.
2. Users can
comment dynamics
in community.
3. Users can post
dynamics.
4. Users can remove
the released dynamics
in Me-My Dynamic.
34 35

Settings
System Settings
Users can click "Me" to enter the set up,
including unit, feedback, terms of agreement,
privacy agreement and clear cache, etc.
Unit settings (metric or imperial
standard)
Users can clean up the system cache
according to users' needs, including
Gymax App H5 web page load cache
and image load cache.
Users can submit suggestions
and the problem for improving
the product.
Feedback
Clear Cache
36 37

1. Précautions de Sécurité et Instructions d'Avertissement
Remarque : Veuillez lire attentivement les instructions avant
l'utilisation, et faites attention aux précautions de sécurité suivantes :
◆Le tapis de course est adapté pour être placé à l'intérieur afin
d'éviter l'humidité, l'eau ne doit pas être éclaboussée sur le tapis de
course, et aucun objet étranger ne doit être placé.
◆Avant de faire de l'exercice, veuillez porter des vêtements et des
chaussures de sport adaptés. Il est strictement interdit de s'exercer
sur le tapis de course pieds nus, et d'étirer l'ensemble du corps.
◆La fiche d'alimentation doit être reliée à la terre de manière fiable,
et la prise doit avoir un circuit dédié pour éviter le partage avec
d'autres équipements électriques.
◆Les enfants doivent se tenir à l'écart de la machine pour éviter les
accidents.
◆Un fonctionnement excessif en surcharge à long terme doit être
évité, sinon le moteur et le contrôleur seront endommagés, et
l'usure et le vieillissement des roulements, des courroies de
roulement et des marchepieds seront accélérés, et un entretien
régulier doit être effectué.
◆Réduisez la poussière intérieure, maintenez une certaine humidité
dans la pièce, et évitez une forte électricité statique, sinon elle peut
interférer avec le travail normal du compteur et du contrôleur
électroniques.
FR ◆Veuillez éteindre le tapis de course après l'exercice.
◆Veuillez maintenir la circulation de l'air intérieur lorsque vous
utilisez le tapis de course.
◆Lorsque vous faites de l'exercice, veuillez attacher le clip du câble
de verrouillage de sécurité aux vêtements pour empêcher un arrêt
sûr en cas d'urgence.
◆Si vous vous sentez mal à l'aise ou anormal pendant l'utilisation,
veuillez arrêter l'exercice et consulter un médecin.
◆Après avoir utilisé l'huile de silicone, il faut la ranger dans un
endroit hors de portée des enfants, afin d'éviter les conséquences
graves dues à une ingestion accidentelle.
◆La zone de sécurité derrière le tapis de course est de
1000x2000mm (40" x 79").
◆Saut d'urgence : Tout en tenant la main courante des deux mains
pour soutenir le corps, marchez sur le côté de la virure, sautez du
tapis roulant d'un côté.
AVERTISSEMENT : Afin de réduire les risques d'accident ou de
blessure d'autrui, veuillez respecter les points suivants :
◆Veuillez vérifier si les vêtements sont boutonnés ou fermés par
une fermeture éclair avant d'utiliser le tapis de course.
◆Ne portez pas de vêtements qui peuvent être facilement attrapés
par le tapis de course.
◆Ne placez pas le cordon d'alimentation à proximité d'objets
chauds.
◆Ne laissez pas les enfants s'approcher du tapis de course.
◆Ne pas utiliser le tapis de course à l'extérieur.
◆L'alimentation doit être coupée avant de déplacer le tapis de
course.
◆Les non-professionnels ne sont pas autorisés à ouvrir le
protecteur supérieur et le boîtier de queue gauche et droit sans
autorisation.
◆Une seule personne peut s'exercer sur le tapis de course lorsque
la machine est mise en marche.
38 39