Crestron UC-C160-T User manual

The Crestron Flex UC Video Conference System Integrator Solution for
Microsoft Teams Rooms (UC-C160-T) delivers a powerful, professional
solution for knowledge workers who want the Microsoft Teams
software experience in small to midsize meeting and conference rooms.
The UC-C160-T allows the installer to select audio and camera hardware
dictated by the room while offering optional direct or network
connection methods between the included system components.
MinimumRequirements
lA video display, connected to the UC-ENGINE.The system supports a
second display if desired.
lA Microsoft Teams or Skype® for Business software account
NOTE: The account should be prepared two to three weeks in
advance of hardware installation.
lAn environment running Microsoft Exchange Server® software (2013
SP1 or later for on-premises installation or Microsoft 365™ software
for Cloud) for scheduling and/or Skype for Business 2015
(on-premises installation or Microsoft 365 software for Cloud)
lUSBCamera
lAEC-enabled USB speakerphone or DSP device
View the Crestron Flex Pre-Deployment Checklist to help plan your
Crestron Flex installation.
In the Box
UC Engine Bracket Assembly
1 UC-BRKT-100-ASSY (6510636)
1 Power cord
Mounting Hardware
Tabletop Touch Screen Device
1 TS-1070-B-S-T-V (6511748)
Accessories
1 PWE-4803RU, PoEInjector (6502429)
2 CBL-CAT5E-7, CAT5e cable, RJ-45-to-RJ-45, Black,
7 ft (2.1 m) (6509924)
1 CBL-HD-THIN-HS-6, Thin HDMI® cable,
6 ft (1.8 m) (6510946)
1 CBL-HD-20, HDMI cable, 20 ft (6.1 m) (6503567)
1 CBL-USBC-HD-9, USB 3.0 to HDMI Converter cable,
9 ft (2.7 m) (6510718)
1 DM-CBL-ULTRA-PC-20, DigitalMedia™ Ultra Patch cable,
20 ft (6.1 m) (6507640)
1
UC-C160-T QuickStart
Crestron Flex UC Video Conference System Integrator Solution for Microsoft Teams® Rooms

UC-C160-T QuickStart
Crestron Flex UC Video Conference System Integrator Solution for Microsoft Teams® Rooms
Overview
The following diagram illustrates standard system connections. Two optional connection methods are available — direct or network connection. Both
the direct connection and network connection methods are shown below to help determine the appropriate method for your solution. The room
display(s), camera, audio devices, and laptop are not included with this solution. See pages 4and 5for more information.
2

Connect
1. Remove the connector covers prior to making UC-ENGINE
connections on the UC-BRKT-100-ASSY bracket assembly.
1. Make connections to the TS-1070-B-S-T-V touch screen and
UC-BRKT-100-ASSY bracket assembly as shown in the following
illustrations.
The TS-1070-B-S-T-V touch screen can communicate with the
UC-ENGINE over a direct connection or a network connection.
Choose a direct connection to the UC-ENGINE for simple installation
and setup, or a network connection if the TS-1070-B-S-T-V must be
installed on the network and managed by the Crestron XiO Cloud™
service.
UC-C160-T QuickStart
Crestron Flex UC Video Conference System Integrator Solution for Microsoft Teams® Rooms
3

UC-C160-T QuickStart
Crestron Flex UC Video Conference System Integrator Solution for Microsoft Teams® Rooms
Direct Connection
For simplified installation and configuration, use a direct Ethernet connection between the TS-1070-B-S-T-V touch screen's PWE-4803-RU
PoE injector and the USB-to-RJ-45 Ethernet Adapter on the bottom of the UC-ENGINE.
NOTE:Direct Connection does not allow Crestron XiO Cloud management of the TS-1070-B-S-T-V. A network connection must be made as
shown on the following page.
4

Network Connection
Use the network connection for full network control of the TS-1070-B-S-T-V touch screen with the Crestron XiOCloud service. The LAN port
on the TS-1070-B-S-T-V touch screen's PoE injector connects to the UC-ENGINE over the VLAN.
5
UC-C160-T QuickStart
Crestron Flex UC Video Conference System Integrator Solution for Microsoft Teams® Rooms

3. Connect the display devices and camera to the UC-ENGINE as shown below.
6
UC-C160-T QuickStart
Crestron Flex UC Video Conference System Integrator Solution for Microsoft Teams® Rooms

4. Bundle the cables with the integrated cable tie wraps. The cable tie
wraps are reusable.
Complete the Installation
After completing UC-ENGINE connections, secure the connector covers
using a #1 Phillips head screwdriver to replace the screws.
NOTE: For additional security, replace the screws with the spanner
screws included with the bracket assembly. A 1/4 in. bit is also supplied
with the bracket assembly to install the spanner screws.
UC-C160-T QuickStart
Crestron Flex UC Video Conference System Integrator Solution for Microsoft Teams® Rooms
7

Configure
Apply Power
Press the power button on the bottom of the UC-ENGINE and apply
power to all of the other devices in the system.
Configure the TouchScreen
NOTE:If the TS-1070-B-S-T-V touch screen is directly connected to the
UC-ENGINE via the PWE-4803-RU, perform steps 1 and 2 below, and
skip to "Configure the System."Otherwise, continue below.
1. Tap Touch Here to Enable a Specific Application on the bottom of the
TS-1070-B-S-T-V touch screen. A list of applications is displayed.
2. Tap Teams Video, and then tap Confirm. The TS-1070-B-S-T-V touch
screen will reboot.
3. On a computer, open a web browser to the IP address of the
TS-1070-B-S-T-V touch screen. Log in and navigate to Settings >
Applications.
NOTES:
lThe TS-1070-B-S-T-V touch screen (via the PW-4803RU) and
computer must be on the same network switch and VLAN.
lA login with administrative rights for the TS-1070-B-S-T-V touch
screen is required.
4. Enter the following information in the appropriate fields:
lTeams Video PC Address: Enter the IP address or hostname of
the UC-ENGINE.
NOTE: The hostname is printed on a label affixed to the
UC-ENGINE (mounted on the UC-BRKT-100-ASSY bracket
assembly).
lTeams Video PC Port: By default, port number 49500 is used. If
a different port number has been configured on the
UC-ENGINE, enter that port number instead.
lTeams Video Username: Enter the login username for the
UC-ENGINE. (The default username is “admin”.)
lTeams Video Password: Enter the login password for the
UC-ENGINE. (The default password is “sfb”.)
5. Click Save Changes.
For more information, refer to the TS-770 and TS-1070 Product Manual
(Doc. 8555).
Configure the System
Use the TS-1070-B-S-T-V and your Microsoft Teams or Skype account
credentials to configure the UC-ENGINE. Refer to the Crestron Flex UC
Video Conference Systems Supplemental Guide (Doc. 8360).
8
UC-C160-T QuickStart
Crestron Flex UC Video Conference System Integrator Solution for Microsoft Teams® Rooms

Visit the Product Page
Scan the QR code to visit the product page.
UC-C160-T
www.crestron.com/model/6510684
Additional Information
Original Instructions
The U.S. English version of this document is the original instructions.
All other languages are a translation of the original instructions.
Crestron product development software is licensed to Crestron dealers and Crestron
Service Providers (CSPs) under a limited nonexclusive, nontransferable Software
Development Tools License Agreement. Crestron product operating system software is
licensed to Crestron dealers, CSPs, and end-users under a separate End-User License
Agreement. Both of these Agreements can be found on the Crestron website at
www.crestron.com/legal/software_license_agreement.
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed at
www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information, visit
www.crestron.com/opensource.
Crestron, the Crestron logo, DigitalMedia, and Crestron XiOCloud are either trademarks
or registered trademarks of Crestron Electronics, Inc. in the United States and/or other
countries. HDMI and the HDMI logo are either trademarks or registered trademarks of
HDMI Licensing LLC in the United States and/or other countries. Microsoft 365,
Microsoft Exchange Server, Microsoft Teams, and Skype are either trademarks or
registered trademarks of Microsoft Corporation in the United States and/or other
countries. Other trademarks, registered trademarks, and trade names may be used in
this document to refer to either the entities claiming the marks and names or their
products. Crestron disclaims any proprietary interest in the marks and names of others.
Crestron is not responsible for errors in typography or photography.
©2021 Crestron Electronics, Inc.
Doc ID 8395F
09/20/21
9
UC-C160-T QuickStart
Crestron Flex UC Video Conference System Integrator Solution for Microsoft Teams® Rooms