Crestron UC-B30-T User manual

The UC-B30-T Crestron Flex wall mount conferencing system provides a
small room video conference solution for use with the Microsoft Teams®
Rooms intelligent communications platform. It supports a single video
display and features a tabletop touch screen device, UC Bracket
Assembly, and a Smart Soundbar and Camera.
Minimum Requirements
lA video display, connected to the UC Engine.
lA Microsoft Teams or Skype® for Business software account
lAn environment running Microsoft Exchange Server® software (2013
SP1 or later for on-premises installation or Microsoft 365® software
for Cloud) for scheduling and/or Skype for Business 2015 (on-
premises installation or Microsoft 365 software for Cloud)
In the Box
Tabletop Touch Screen Device
1 10.1 in. Tabletop Touch Screen (6510821)
1 Grommet, Cable, Closed (2055455)
1 Grommet, Cable, Open (2055456)
1 Cover, Cable compartment (2055457)
Smart Soundbar and Camera
1 Soundbar and Camera (6511586)
1 Power supply (2045873) with cord (2042043)
1 Cable, USB 3.0, A - B, 6 ft (1.8 m) (2053077)
Mounting hardware
UC Bracket Assembly
1 UC Bracket Assembly with UC Engine and HDMI® content
ingest (6511478)
1 Power cord (2053985)
Mounting hardware
Additional Items
1 PoE injector (6502429)
1 Cable, CAT6a, RJ-45 - RJ-45, 20 ft (6.1 m) (6507640)
2 Cable, CAT5e, RJ-45 - RJ-45, 7 ft (2.1 m) (6509924)
1 Cable, HDMI, 20 ft (6.1 m) (6503567)
1 Cable, HDMI, 6 ft (1.8 m) (6503565)
1 EDID passthrough (2055728)
1
UC-B30-T QuickStart
Crestron Flex Wall Mount Small Room Video Conference System for Microsoft Teams® Rooms

Connect
To make system connections:
1. Remove the connector cover prior to making connections on the
bracket assembly.
2. Make system connections as shown in the following illustrations.
The touch screen can communicate with the bracket assembly over a
direct connection or a network connection.
lChoose a Direct Connection for simple installation and setup.
lChoose a Network Connection if the touch screen is to be managed
by the XiO Cloud® service.
2
UC-B30-T QuickStart
Crestron Flex Wall Mount Small Room Video Conference System for Microsoft Teams® Rooms

Direct Connection
For simplified installation and configuration, use a direct Ethernet connection between the LAN port on the touch screen and the direct connect adapter
on the top of the UC Engine.
CAUTION: Only use the direct connect adapter to connect the touch screen to the bracket assembly. Do not use the direct connect adapter to connect
the bracket assembly to the network.
NOTE: To manage the touch screen with the XiO Cloud® service, make network connections as shown on the following page.
3
UC-B30-T QuickStart
Crestron Flex Wall Mount Small Room Video Conference System for Microsoft Teams® Rooms

Network Connection
Use a network connection for full network control of the touch screen with the XiO Cloud service.
NOTE: When a network connection is used, disconnect the direct connect adapter from the UC Engine.
4
UC-B30-T QuickStart
Crestron Flex Wall Mount Small Room Video Conference System for Microsoft Teams® Rooms

3. Make the remaining system connections as shown below.
5
UC-B30-T QuickStart
Crestron Flex Wall Mount Small Room Video Conference System for Microsoft Teams® Rooms

4. Bundle the cables with the integrated cable tie wraps. The cable tie
wraps are reusable.
5. After completing the connections, secure the connector cover using a
#1 Phillips head screwdriver to replace the screw.
Configure
Apply Power
Press the power button on the bottom of the UC Engine and apply power
to all of the other devices in the system.
Configure the Touch Screen
NOTE:If a direct connection was made during installation, perform
steps 1 and 2 below, and skip to Configure the System.
1. Tap Touch Here to Enable a Specific Application on the bottom of the
touch screen. A list of applications is displayed.
2. Tap Teams Video, and then tap Confirm. The touch screen will reboot.
3. On a computer, open a web browser to the IP address of the touch
screen. Log in and navigate to Settings >Applications.
NOTES:
lThe touch screen (via the PoE injector) and computer must be on
the same network switch and VLAN.
lA login with administrative rights for the touch screen is required.
4. Enter the following information in the appropriate fields:
lTeams Video PC Address: Enter the IP address or hostname of the
UC Engine.
NOTE: The hostname is printed on a label affixed to the UC Engine
(mounted on the UC bracket assembly).
lTeams Video PC Port: By default, port number 49500 is used. If a
different port number has been configured on the UC Engine, enter
that port number instead.
lTeams Video Username: Enter the login username for the UC
Engine. (The default username is “admin”.)
lTeams Video Password: Enter the login password for the UC
Engine. (The default password is “sfb”.)
5. Click Save Changes.
6
UC-B30-T QuickStart
Crestron Flex Wall Mount Small Room Video Conference System for Microsoft Teams® Rooms

Configure the System
Use the touch screen and your Microsoft Teams or Skype account
credentials to configure the UC Engine. Refer to the Crestron Flex UC
Video Conference Systems (Doc. 8360) for more information.
Visit the Product Page
Scan the QR code to visit the product page.
UC-B30-T
www.crestron.com/model/6511609
Additional Information
Original Instructions
The U.S. English version of this document is the original instructions.
All other languages are a translation of the original instructions.
Crestron product development software is licensed to Crestron dealers and Crestron
Service Providers (CSPs) under a limited nonexclusive, nontransferable Software
Development Tools License Agreement. Crestron product operating system software is
licensed to Crestron dealers, CSPs, and end-users under a separate End-User License
Agreement. Both of these Agreements can be found on the Crestron website at
www.crestron.com/legal/software_license_agreement.
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed at
www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information, visit
www.crestron.com/opensource.
Crestron, the Crestron logo, and XiO Cloud are either trademarks or registered
trademarks of Crestron Electronics, Inc. in the United States and/or other countries.
HDMI is either a trademark or registered trademark of HDMI Licensing LLC in the
United States and/or other countries. Microsoft 365, Microsoft Exchange Server,
Microsoft Teams, andSkype are either trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other countries. DisplayPort is either
a trademark or registered trademark of Video Electronics Standards Association in the
United States and/or other countries. Other trademarks, registered trademarks, and
trade names may be used in this document to refer to either the entities claiming the
marks and names or their products. Crestron disclaims any proprietary interest in the
marks and names of others. Crestron is not responsible for errors in typography or
photography.
©2020 Crestron Electronics, Inc.
Doc. 8800A
08/27/20
7
UC-B30-T QuickStart
Crestron Flex Wall Mount Small Room Video Conference System for Microsoft Teams® Rooms