Crestron UC-MX70-NC-T User manual

The UC-MX70-NC-T Crestron Flex advanced tabletop conferencing
system provides a large room conference solution for use with Microsoft
Teams® Rooms software. It supports single or dual video displays and
features a Crestron Flex tabletop conference device and UC bracket
assembly.
Minimum Requirements:
lA Microsoft Teams certified USB Camera (not included).
lA video display (not included) connected to the UCEngine. A second
display is optional.
lA Microsoft Teams Rooms provisioned account (not included).
In the Box
Tabletop Conference Device
1 Tabletop Conference Device, Microsoft Teams video
(6511747)
1 Cable, CAT5e, RJ-45 - RJ-45, 12 ft (3.7 m) (2033988)
1 Cable Retention Plate (2047908)
1 Power supply (2045873) with cord (2042043)
3 Tie Wrap (2047935)
UC Bracket Assembly
1 UC Bracket Assembly with UC Engine and HDMI® or AV
over CAT5 content ingest (UC-BRKT-260-P-T-ASSY,
6512691)
2 Anchor, Drywall, Plastic, 3/8 in. x 1/2 in. (9.5mm x
12.7mm) (2052565)
1 Key, Anchor (4529654)
1 Power pack (2045870)
2 Screw, 8-AB x 1-1/2 in. (38.1 mm), Pan Head, Combo
(2052567)
4 Tie Wrap (2047935)
Additional Items
1 Microphone pod (6508084)
2 Cable, CAT6a, RJ-45 - RJ-45, 20 ft (6.1 m) (6507640)
1 Cable, CAT5e, RJ-45 - RJ-45, 7 ft (2.1 m) (6509924)
1 Cable, DisplayPort™ to HDMI, 6 ft (1.8 m) (6508282)
1 Cable, thin HDMI®, 6 ft (1.8 m) (6510946)
1 Cable, HDMI, 6 ft (1.8 m) (6512150)
1 Cable, USB 2.0, A - Micro-B, 6 ft (1.8 m) (6510947)
1
UC-MX70-NC-T QuickStart
Crestron Flex Advanced Tabletop Large Room Conference System for Microsoft Teams® Rooms

Mount Devices
Mount the UC Bracket Assembly
Mount the UC Bracket Assembly to VESA® compliant display devices, a
wall, or other building structure. Anchors and screws are supplied for
installation on walls with 3/8 in. (9.5mm) to 3/4 in. (19mm) thickness.
CAUTION: Preinstalled screws may protrude from the back of the
UC Bracket Assembly. Exercise caution when handling the UC
Bracket Assembly to avoid scratching or damaging surfaces.
NOTE: The integrated cable tie wraps are reusable. Avoid damaging
the cable tie wraps.
2
UC-MX70-NC-T QuickStart
Crestron Flex Advanced Tabletop Large Room Conference System for Microsoft Teams® Rooms

Connect
System Overview
When connections are complete, the system appears as shown below. Refer to Make Connections for detailed connection instructions.
3
UC-MX70-NC-T QuickStart
Crestron Flex Advanced Tabletop Large Room Conference System for Microsoft Teams® Rooms

Make Connections
1. Make UC Engine connections as shown in the following illustrations. The conference device can communicate with the UC Engine over a direct
connection or a network connection. Select one of the connection types as described below.
lMake a direct connection for simple installation and setup. Only use the direct connect adapter to connect the conference device to the UC
Engine. Do not use the direct connect adapter to connect the UC Engine to the network.
Direct Connection
4
UC-MX70-NC-T QuickStart
Crestron Flex Advanced Tabletop Large Room Conference System for Microsoft Teams® Rooms

lMake a network connection if the system is to be managed by the XiO Cloud® service.
NOTE: When a network connection is used, disconnect the direct connect adapter from the UC Engine.
Network Connection
5
UC-MX70-NC-T QuickStart
Crestron Flex Advanced Tabletop Large Room Conference System for Microsoft Teams® Rooms

2. Make a network or direct connection on the bottom of the conference device as described in step 1. Make the remaining content ingest, laptop,
mic pod, and power connections. Connect the conference device's power supply to an AC power outlet.
6
UC-MX70-NC-T QuickStart
Crestron Flex Advanced Tabletop Large Room Conference System for Microsoft Teams® Rooms

3. Connect the power supply and camera (not included) to the bottom of the content ingest device (HD-CONV-USB-260). Connect the power
supplies to an AC power outlet.
4. Bundle the cables to the bracket assembly with the integrated cable tie wraps. The cable tie wraps are reusable.
7
UC-MX70-NC-T QuickStart
Crestron Flex Advanced Tabletop Large Room Conference System for Microsoft Teams® Rooms

Configure
Apply Power
Press the power button on the bottom of the UC Engine and apply
power to all of the other devices in the system.
Configure the Conference Device
1. On a computer, enter the IP address displayed on the conference
device into a web browser to configure the device to operate in
Teams Video mode.
NOTES:
lThe device and computer must be on the same network switch
and VLAN.
lA login with administrative rights for the device is required.
2. Log in to the device and navigate to DEVICE >Applications.
3. Enter the following information in the appropriate fields:
lTeams Video PC Address: Enter the IP address or hostname of the
UC Engine.
NOTE: The hostname is printed on a label affixed to the UC
Engine.
lTeams Video PC Port: By default, port number 49500 is used. If a
different port number has been configured on the UC Engine,
enter that port number instead.
lTeams Video Username: Enter the login username for the UC
Engine. (The default username is “admin”.)
lTeams Video Password: Enter the login password for the UC
Engine. (The default password is “sfb”.)
4. Select Save Changes.
Configure the System
Use the conference device and your Microsoft Teams credentials to
configure the UC Engine. For detailed information on deploying
Microsoft Teams Rooms, refer to the Microsoft Teams Rooms
documentation.
8
UC-MX70-NC-T QuickStart
Crestron Flex Advanced Tabletop Large Room Conference System for Microsoft Teams® Rooms

Visit the Product Page
Scan the QR code to visit the product page.
UC-MX70-NC-T
www.crestron.com/model/6513795
Additional Information
Original Instructions
The U.S. English version of this document is the original instructions.
All other languages are a translation of the original instructions.
Crestron product development software is licensed to Crestron dealers and Crestron
Service Providers (CSPs) under a limited nonexclusive, nontransferable Software
Development Tools License Agreement. Crestron product operating system software
is licensed to Crestron dealers, CSPs, and end-users under a separate End-User
License Agreement. Both of these Agreements can be found on the Crestron website
at www.crestron.com/legal/software_license_agreement.
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed at
www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information,
visit www.crestron.com/opensource.
Crestron, the Crestron logo, and XiO Cloud are either trademarks or registered
trademarks of Crestron Electronics, Inc. in the United States and/or other countries.
HDMI is either a trademark or registered trademark of HDMI Licensing LLC in the
United States and/or other countries. Microsoft Teams is either a trademark or
registered trademark of Microsoft Corporation in the United States and/or other
countries. DisplayPort and VESA are either trademarks or registered trademarks of
Video Electronics Standards Association in the United States and/or other countries.
Other trademarks, registered trademarks, and trade names may be used in this
document to refer to either the entities claiming the marks and names or their
products. Crestron disclaims any proprietary interest in the marks and names of
others. Crestron is not responsible for errors in typography or photography.
©2024 Crestron Electronics, Inc.
Doc. 9475A
01/25/24
9
UC-MX70-NC-T QuickStart
Crestron Flex Advanced Tabletop Large Room Conference System for Microsoft Teams® Rooms