Crosswater 1000 Series User manual

Installation Instructions
Adjustable
wrench
Cross head
screwdriver
Hexagonal
key
Clear silicone
adhesve caulk
COLLARS
COLLAR
ADAPTOR
COLLARS
1000/1500/2000/2500/3000
Shower Valve Trim Kits
US-ARCV34/US-ARCV35
US-BL1000/1500/2000/2500/3000
US-PRO1000/1500/2000/2500/3000
US-WF1000/1500/2000/2500/3000
US-WP1000/1500/2000/2500/3000
Introduction Tools required
Theinstallation must comply with all plumbing codes including local
codes. NOTE: Image shows single-outlet trim kit, please follow the
same steps if you have a multi-outlet valve.
NOTE: These instructions also apply if you have a lever or cross
handle. (Please make sure you place in correct orientation if there are
etchings on the front of the handle.)
INSTALLATION: Turn off the main water supply before connecting to any
existing pipe work.
WARNING! Please check for any hidden pipes and cables, electric or
otherwise before drilling holes in a wall.
NOTE: Inspect for any damage that may have occurred during transport.
Damage claims cannot be made during or after installation.
Installation 1000 rough
Follow install guide for US-WLBP1000 valve rough.
Attach collars by turning these into the valve.
Installation 1500 rough
Follow install guide for US-WLBP1500 valve rough.
Attach collars by turning these into the valve.

Warranty - All Crosswater London products come with a limited lifetime warranty. For full details, terms and conditions visit our website.
For further information contact:Crosswater London,393 Fortune Blvd., Milford, MA 01757
Toll free number: 844-XWATER-1 (844-992-8371) tel: [phone] fax: [phone]
www.crosswaterlondon.com
email: [e-mail]
Issue date: 120617
COVER
PLATE
CONTROL
HANDLE
Installation
COVER
PLATE CONTROL
HANDLE
Apply a narrow bead of clear silicone adhesive caulk around the
back edge of the cover plate and carefully press into position.
(Please make sure you place in correct orientation if there are
etchings on the front of the cover plate.)
cover with the set screw on the handle, tighten the screw with an
hexagonal key.
The cover plate comes affixed with a removable cUPC sticker.
The sticker may be peeled off following installation of the cover plate.
Three-hole backplate
models installed the
same way.