Crosswater Fenmore 28-15P-T User manual

Warranty - This Crosswater London product is covered by a limited lifetime warranty. For full details, terms and conditions please visit our website.
For further information contact:
Crosswater London, 393 Fortune Blvd., Milford, MA 01757
Toll free number: 844-XWATER-1 (844-992-8371) tel: [phone] fax: [phone]
www.crosswaterlondon.com
Issue date:16092022
email: [email protected]
Fenmore
Pressure Balance Trim
28-15P-T
Installation Instructions
15125630 415125630
28-15P-T
Teflon TapeAdjustable Pliers
Adjustable Wrench
Tools You Will Need
Hacksaw
For easy installation of your faucet you will need:
● To read all the installation completely before beginning.
● To read all warnings, care, and maintenance information.
● To complete the valve rough-in prior to installing this trim kit.
Screwdriver
Applicable Standards/Codes
Installation Dimensions
IAPMO certified to meet or exceed the following:
• ASME A112.18.1/CSA B125.1
• Uniform Plumbing Code
• National Plumbing Code of Canada
• ADA Compliant
2 3/16＂-3 3/16＂
5 1/2＂-6 5/15＂
1/2＂NPT
2 3/16＂
2 15/16＂
4 1/16＂
7 5/16＂
7/16＂
(5‐3 /16＂ with extensions)
Before beginning installation, check for any damage
that may have occurred during transport.
Note: Damage claims cannot be made during or
after installation.

Replacement Parts
28-15P-T
Installation Instructions
15125630 2 151256303
Cleaning Instructions
Rinse away any traces of soap and gently dry with a clean, soft cloth after each use. Rinse completely with water and
dry any overspray. This will maintain the finish and avoid water spotting.
To remove mineral deposits, use a 50/50 solution of white vinegar and water. Do not allow the solution to soak on the
product.
Simichrome Polish® contains a protective film to enhance maintenance and is helpful in preventing water spot buildup.
Follow instructions to ensure optimum results.
Never use an abrasive material such as a brush or scouring pad to clean the surface. The use of abrasive cleaners,
cleansers or disinfectants will alter the surface finish and void the warranty.
Do not allow certain materials such as toothpaste, cologne, shaving cream, nail polish remover, vinegar, wine, drain
and glass cleaners to remain on the surface. Prolonged contact will alter surface finishes and void the warranty.
We DO NOT recommend using any household cleaners as many can cause damage to the finish.
Please see the website for care instructions for specific finishes.
NO. Description Part No.
1
Escutcheon Assembly
5T1C0319NT
5Y0344900
5R4R0171PL
2
5
Threaded Nipple Extension
Washer
5P0072900NT0 4 Pressure Balance Stem Extension
5L0164400PL0 3 Stem
5Y03424006 Handle Assembly
2
1
45
3
6
1
Remove the mud guard.
Set the handle in the desired off
position and place handle assembly
on the valve. Rotate clockwise
securing the handle assembly and
escutcheon to the wall and engaging
the stem.
- If all functions smoothly go to step
#15.
- If the handle assembly will not
engage the stem, go to step #4.
- If the handle assembly will not
bottom out on the escutcheon go to
step #10.
3
2
Carefully slide the escutcheon on
valve.
If the handle assembly will
not engage the stem,
remove the handle assembly.
4
a）Add the threaded nipple and pressure balance
stem extensions supplied with trim.
b) Set the handle in the desired off position and place
the handle assembly on the valve and rotate clockwise
securing the assembly and escutcheon, engage to the
wall and the stem.
- If all functions smoothly go to step # 15
- If the handle assembly will not bottom out on the
escutcheon go to step #6.
Cut stem and nipple extensions the
amount noted in step # 6. (Never
cut the stem and nipple while still on
the valve. This may damage the
valve.)
Remove the handle assembly, nipple
and stem extensions.
Re-install the nipple, stem extension
and handle assembly.Go to step
# 15.
Measure and note the
distance ‘YY’ (the distance
between the bottom of the
handle assembly and the
escutcheon).
89
ab
6
7
5
11
Remove the handle and escutcheon
assembly, the plate, stem and nipple.
If handle assembly will not bottom
out the escutcheon to the wall,
measure and note the distance
‘XX’(the distance between the
bottom of the handle assembly and
the escutcheon)
Cut stem and nipple the amount
noted in step # 10. (Never cut the
stem and nipple while still on the
valve. This may damage the valve.)
12
13
Re-install the trimmed stem and
nipple on the valve.
Place escutcheon on valve. Thread
on handle assembly to secure
escutcheon.
a
a
10
Installation Complete.
15
b
b
14
}
Stem
Extension
Rod

Replacement Parts
28-15P-T
Installation Instructions
15125630 2 151256303
Cleaning Instructions
Rinse away any traces of soap and gently dry with a clean, soft cloth after each use. Rinse completely with water and
dry any overspray. This will maintain the finish and avoid water spotting.
To remove mineral deposits, use a 50/50 solution of white vinegar and water. Do not allow the solution to soak on the
product.
Simichrome Polish® contains a protective film to enhance maintenance and is helpful in preventing water spot buildup.
Follow instructions to ensure optimum results.
Never use an abrasive material such as a brush or scouring pad to clean the surface. The use of abrasive cleaners,
cleansers or disinfectants will alter the surface finish and void the warranty.
Do not allow certain materials such as toothpaste, cologne, shaving cream, nail polish remover, vinegar, wine, drain
and glass cleaners to remain on the surface. Prolonged contact will alter surface finishes and void the warranty.
We DO NOT recommend using any household cleaners as many can cause damage to the finish.
Please see the website for care instructions for specific finishes.
NO. Description Part No.
1
Escutcheon Assembly
5T1C0319NT
5Y0344900
5R4R0171PL
2
5
Threaded Nipple Extension
Washer
5P0072900NT0 4 Pressure Balance Stem Extension
5L0164400PL0 3 Stem
5Y03424006 Handle Assembly
2
1
45
3
6
1
Remove the mud guard.
Set the handle in the desired off
position and place handle assembly
on the valve. Rotate clockwise
securing the handle assembly and
escutcheon to the wall and engaging
the stem.
- If all functions smoothly go to step
#15.
- If the handle assembly will not
engage the stem, go to step #4.
- If the handle assembly will not
bottom out on the escutcheon go to
step #10.
3
2
Carefully slide the escutcheon on
valve.
If the handle assembly will
not engage the stem,
remove the handle assembly.
4
a）Add the threaded nipple and pressure balance
stem extensions supplied with trim.
b) Set the handle in the desired off position and place
the handle assembly on the valve and rotate clockwise
securing the assembly and escutcheon, engage to the
wall and the stem.
- If all functions smoothly go to step # 15
- If the handle assembly will not bottom out on the
escutcheon go to step #6.
Cut stem and nipple extensions the
amount noted in step # 6. (Never
cut the stem and nipple while still on
the valve. This may damage the
valve.)
Remove the handle assembly, nipple
and stem extensions.
Re-install the nipple, stem extension
and handle assembly.Go to step
# 15.
Measure and note the
distance ‘YY’ (the distance
between the bottom of the
handle assembly and the
escutcheon).
89
ab
6
7
5
11
Remove the handle and escutcheon
assembly, the plate, stem and nipple.
If handle assembly will not bottom
out the escutcheon to the wall,
measure and note the distance
‘XX’(the distance between the
bottom of the handle assembly and
the escutcheon)
Cut stem and nipple the amount
noted in step # 10. (Never cut the
stem and nipple while still on the
valve. This may damage the valve.)
12
13
Re-install the trimmed stem and
nipple on the valve.
Place escutcheon on valve. Thread
on handle assembly to secure
escutcheon.
a
a
10
Installation Complete.
15
b
b
14
}
Stem
Extension
Rod

Warranty - This Crosswater London product is covered by a limited lifetime warranty. For full details, terms and conditions please visit our website.
For further information contact:
Crosswater London, 393 Fortune Blvd., Milford, MA 01757
Toll free number: 844-XWATER-1 (844-992-8371) tel: [phone] fax: [phone]
www.crosswaterlondon.com
Issue date:16092022
email: [email protected]
Fenmore
Pressure Balance Trim
28-15P-T
Installation Instructions
15125630 415125630
28-15P-T
Teflon TapeAdjustable Pliers
Adjustable Wrench
Tools You Will Need
Hacksaw
For easy installation of your faucet you will need:
● To read all the installation completely before beginning.
● To read all warnings, care, and maintenance information.
● To complete the valve rough-in prior to installing this trim kit.
Screwdriver
Applicable Standards/Codes
Installation Dimensions
IAPMO certified to meet or exceed the following:
• ASME A112.18.1/CSA B125.1
• Uniform Plumbing Code
• National Plumbing Code of Canada
• ADA Compliant
2 3/16＂-3 3/16＂
5 1/2＂-6 5/15＂
1/2＂NPT
2 3/16＂
2 15/16＂
4 1/16＂
7 5/16＂
7/16＂
(5‐3 /16＂ with extensions)
Before beginning installation, check for any damage
that may have occurred during transport.
Note: Damage claims cannot be made during or
after installation.