Crosswater Darby 15-16-T User manual

15123035
Adjustable PliersAdjustable Wrench
Tools You Will Need
Screwdriver
For ease of installation you will need:
ƔTo read the installation instructions completely before beginning.
ƔTo read all warnings, care, and maintenance information.
ƔTo complete the valve rough-in prior to installing this trim kit.
%BSCZ5IFSNPTUBUJD7BMWF Trim
1-1T
Installation Instructions
Before beginning installation, check for any
damage that may have occurred during transport.
Note: Damage claims cannot be made during
or after installation.

15-16-T
Installation Instructions
15123035 2
5
12
4
Slide on top plate on the finished
sleeve. If the top plate does not
engage the finished sleeve an
extension kit is necessary.
Please contact your Crosswater
London dealer.
Turn off the water supply and remove
the mud guard.
NOTE: Make sure the hole in the
stem is facing straight up. (This sets
the valve at 100º).
Install escutcheon with 2 screws.
Do not overtighten the screws.
3
Thread on finished sleeve.
8
Slide on escutcheon engaging the
stem making sure the temperature
override button facing straight up.
Secure with screw.
Turn on the water supply. Remove
the shower head and turn on the
volume control handle to flush the
system. Replace the shower head.
6
Align the handle at 6 o' clock position
and slide handle into escutcheon
and secure with set screw.
79
Turn on the water supply, with the
temperature control handle in the
default position, measure the
temperature of the water. If the
temperature is 100ºF, go to step #13,
if not go to step #10.
100
o
F
Safety
Temperature

15123035 6
15-16-T-PC
15-16-T-SN
15-16-T-PN
Applicable Standards/Codes
Installation Dimensions
151230353
10 11
Rotate the cartridge stem to adjust
safety temperature. Rotate clockwise
to reduce temperature, rotate
counterclockwise to increase the
temperature. Once the temperature
is 100ºF go to step #12.
Turn off the water supply. Remove
temperature control handle and
escutcheon.
IAPMO certified to meet or exceed the following:
$60($&6$%
8QLIRUP3OXPELQJ&RGH
1DWLRQDO3OXPELQJ&RGHRI&DQDGD
$'$&RPSOLDQW
 ʾ
 ʾ
7 ʾ
3 ʾ
 ʾ  ʾ
 ʾ  ʾ
5 ʾ-  ʾ
137
13
The valve maximum temperature is
set at 107ºF. Should your customer
OLNHWRFKDQJHWKLVJRWRVWHS
If not go to step #19.
14
Turn off the water supply. Remove
handle, escutcheon.
Rotate the inner white temperature
range control ring to adjust
temperature. Rotate clockwise to
reduce the maximum temperature,
rotate counterclockwise to increase
the maximum temperature.
Reinstall the inner white temperature
range control ring.
12
Reinstall the temperature control
handle and escutcheon making sure
the temperature override button is on
top and the handle is set at 6 o'clock.
15
Remove the inner white temperature
range control ring.
18
Reinstall handle, escutcheon.
100
o
F
Safety
Temperature
107
o
F
Hottest
Temperature
16 17

15-16-T-PC
15-16-T-SN
15-16-T-PN
15123035 
Cleaning Instructions
Replacement Parts
Rinse away any traces of soap and gently dry with a clean, soft cloth after each use. Rinse completely with water and
dry any overspray. This will maintain the finish and avoid water spotting.
To remove mineral deposits, use a 50/50 solution of white vinegar and water. Do not allow the solution to soak on the
product.
Simichrome Polish® contains a protective film to enhance maintenance and is helpful in preventing water spot buildup.
Follow instructions to ensure optimum results.
Never use an abrasive material such as a brush or scouring pad to clean the surface. The use of abrasive cleaners,
cleansers or disinfectants will alter the surface finish and void the warranty.
Do not allow certain materials such as toothpaste, cologne, shaving cream, nail polish remover, vinegar, wine, drain and
glass cleaners to remain on the surface. Prolonged contact will alter surface finishes and void the warranty.
We DO NOT recommend using any household cleaners as many can cause damage to the finish.
Please see the website for care instructions for specific finishes.
151230355
6-9

5
3
1
2
Ordered Separately
NO. Description Part NO.
1ScrewMX05T0F0266NT
Washer 43/
2
Spring˂%utton˂Pin 4
3
Handle Assembly &
Hex Set Screw & Allen Key 9Q1356NT

Extension kit(Polished Chrome) 9Q1172CP
5
Extension kit(Satin Nickel) 9Q1172AP
6
Extension kit(Polished Nickel) 9Q1172RN
7

19
Installation completed.

15-16-T
15123035 
Cleaning Instructions
Replacement Parts
Ɣ2QO\XVHDVRIWGDPSHQHGVSRQJHRUFORWKWRFOHDQDQGSROLVKWKHIL[WXUH
Ɣ:LSHIL[WXUHVDQGWKHLPPHGLDWHDUHDVFOHDQDQGULQVHFRPSOHWHO\ZLWKZDWHULPPHGLDWHO\DIWHULQVWDOODWLRQDQGDIWHU
applying any cleaner.
Ɣ,I\RXDUHXVLQJDFOHDQLQJFRPSRXQGRQRUFORVHWRWKHSURGXFWSOHDVHWHVWWKHFRPSRXQGRQDKLGGHQDUHDRIWKH
trim to ensure it will not damage the finish.
Ɣ'RQRWDOORZFOHDQHUVWRVRDNDQ\ZKHUHRQWKHSURGXFW
151230355
6-9

5
3
1
2
Ordered Separately
NO. Description Part NO.
1ScrewMX05T0F0266NT
Washer 43/
2
Spring˂%utton˂Pin 4
3
Handle Assembly &
Hex Set Screw & Allen Key 9Q1356NT

Extension kit(Polished Chrome) 9Q1172CP
5
Extension kit(Satin Nickel) 9Q1172AP
6
Extension kit(Polished Nickel) 9Q1172RN
7

19
Installation completed.

15123035 6
15-16-T
Applicable Standards/Codes
Installation Dimensions
151230353
10 11
Rotate the cartridge stem to adjust
safety temperature. Rotate clockwise
to reduce temperature, rotate
counterclockwise to increase the
temperature. Once the temperature
is 100ºF go to step #12.
Turn off the water supply. Remove
temperature control handle and
escutcheon.
IAPMO certified to meet or exceed the following:
$60($&6$%
8QLIRUP3OXPELQJ&RGH
1DWLRQDO3OXPELQJ&RGHRI&DQDGD
$'$&RPSOLDQW
-1/2"
1/2"
7 ʾ
3 ʾ
- ʾ  - ʾ
-1 ʾ
 -1/4"
5 ʾ - - ʾ
137
13
The valve maximum temperature is
set at 107ºF. Should your customer
OLNHWRFKDQJHWKLVJRWRVWHS
If not go to step #19.
14
Turn off the water supply. Remove
handle, escutcheon.
Rotate the inner white temperature
range control ring to adjust
temperature. Rotate clockwise to
reduce the maximum temperature,
rotate counterclockwise to increase
the maximum temperature.
Reinstall the inner white temperature
range control ring.
12
Reinstall the temperature control
handle and escutcheon making sure
the temperature override button is on
top and the handle is set at 6 o'clock.
15
Remove the inner white temperature
range control ring.
18
Reinstall handle, escutcheon.
100
o
F
Safety
Temperature
107
o
F
Hottest
Temperature
16 17
Warranty - This Crosswater London product is covered by a limited lifetime warranty. For full details, terms and conditions please visit our website.
For further information contact:Crosswater London, 393 Fortune Blvd., Milford, MA 01757
Toll free number: 844-XWATER-1 (844-992-8371) tel: [phone] fax: [phone]
www.crosswaterlondon.com
email: [e-mail]