CYP PUV-3050TX-UA User manual

PUV-3050TX-UA
UHD+ HDMI over HDBaseT3 Transmitter
with Analogue Audio I/O & USB 2.0
OPERATION MANUAL

DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2021 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply. Please keep the
following in mind as you unpack and install this equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
• Please completely disconnect the power when the unit is not in use
to avoid wasting electricity.
VERSION HISTORY
REV. DATE SUMMARY OF CHANGE
RDV1 2021/12/06 Preliminary release

CONTENTS
1. Introduction..................................................1
2. Applications ..................................................1
3. Package Contents .........................................1
4. System Requirements ..................................1
5. Features.........................................................2
6. Operation Controls and Functions..............3
6.1 Front Panel ............................................................3
6.2 Rear Panel...............................................................4
6.3 IR Cable Pinouts ...................................................5
6.4 Serial Pinout ..........................................................5
6.5 Audio Pinouts........................................................5
7. Connection Diagram ....................................6
8. Specications................................................7
8.1 Technical Specifications ....................................7
8.2 Video Specifications............................................8
8.3 Audio Specifications........................................ 10
8.3.1 Digital Audio ........................................... 10
8.3.2 Analogue Audio..................................... 10
8.4 Cable Specifications ........................................ 11
8.5 HDBaseT Features............................................. 12
9. Acronyms.....................................................13

1
1. INTRODUCTION
This 4K UHD+HDMI over HDBaseT transmitter uses HDBaseT 3.0, the
newest generation of HDBaseT technology, and is the perfect solution for
extending full bandwidth (18Gbps) HDMI 2.0, 4K@60Hz (4:4:4, 8-bit) video
with HD audio via a single run of Cat.6A/7 cable over distances of up to 40
meters. Multiple control and data signals may also be transmitted along
with the audio and video, including IR, RS-232, USB 2.0. This transmitter
is ideal for use in any video extension scenario, especially when latency-
free, uncompressed, high resolution video is critical, such as medical
installations, live conferences, and education.
When used with its matched receiver, 2 micro USB host connections are
available (1 on the transmitter, 1 on the receiver) for connecting a single
USB host (such as a laptop or PC) to devices on up to 4 USB 2.0 (Type-A)
ports (2 on the transmitter, 2 on the receiver) forming a highly exible
KVM extension conguration.
2. APPLICATIONS
Household entertainment sharing and control
Lecture hall/classroom display and control
Meeting room presentation and control
3. PACKAGE CONTENTS
1× UHD+HDMI over HDBaseT Transmitter with USB KVM
1× 24V/2.7A DC Power Adapter
2× 3-pin Terminal Block
1× 8-pin Terminal Block
1× Operation Manual
4. SYSTEM REQUIREMENTS
HDMI source equipment such as media player, video game console, or
set-top box.
HDMI receiving equipment such as an HDTV, monitor, or audio
amplifier.
A compatible HDBaseT receiver with PoH (PD) support is
recommended.
The use of Premium High Speed HDMI cables, and industry standard
Cat.6A or Cat.7 Ethernet cable is highly recommended.

2
5. FEATURES
HDMI 2.0 and DVI 1.0 compatible
HDCP 2.2 and HDCP 1.x compliant
HDBaseT 3.0 compliant (Backwards compatible with HDBaseT 2.0/1.0)
1 HDMI input, 1 HDMI output, and 1 HDBaseT output
Supports up to 4K UHD+(18Gbps, 4K@60Hz 4:4:4, 8-bit) video input
and output over both HDMI and HDBaseT
Supports Deep Colour input and output up to 12-bit
Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output
Supports CEC bypass
HDBaseT extends video, audio and data over a single Cat.6A/7 cable
and can reach distances up to 40m/131ft
HDBaseT feature support: HD Video and Audio, PoH (PSE), Bi-
directional audio (analogue), and Control (bi-directional USB/IR/RS-232
pass-through)
2 USB 2.0 Type-A device ports and 1 Micro USB host port
Selectable HDMI audio extraction/analogue audio bypass functionality
when paired with a compatible receiver
HDMI output functions as a local monitor
Supplies PoH to the connected receiver

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
AUDIO IR
IN
OUT LR R PWRT
TEST PASS
FAIL LINK
2
1 3 7 9
4 5 6 8 10
PUV-3050TX-UA
1AUDIO IN 3-pin Terminal Block: Connect to the analogue audio
output of a device such as a media player or game console using a
3-pin adapter cable. Audio is sent to the analogue audio output on
the connected compatible receiver.
2AUDIO OUT 3-pin Terminal Block: Connect to powered speakers or
an amplier for analogue audio output using a 3-pin adapter cable.
Audio is sourced from the analogue audio input on the connected
compatible receiver.
3RS-232 4-pin Terminal Block: Connect to a PC, laptop, or serial
controllable device with a 4-pin adapter cable for the extension of
RS-232 signals between both ends of the HDBaseT connection.
4IR 4-pin Terminal Block (In/Out): Connect to both an IR Blaster and
Extender using a 4-pin Y-adapter cable to transmit and receive IR
control signals and extend them to devices connected to the other
end of the HDBaseT connection.
5USB 2.0 Ports (Type-A): Connect directly to standard USB devices
such as a mouse, keyboard, or ash drive to extend their USB
functionality to the currently active Micro-USB host port.
6TEST Button: Press this button to initiate a simple HDBaseT cable
quality test. While the test is in process, both the TEST and FAIL LEDs
will blink.
Note: This feature requires connection to a compatible receiver. This
function will not provide a result if no receiver is connected.
7PASS LED: This LED will illuminate solidly to indicate that the most

4
recent cable test result was successfully passed.
8FAIL LED: This LED will illuminate solidly to indicate that the most
recent cable test resulted in a failure with too many detected errors.
9POWER LED: This LED will illuminate to indicate the unit is on and
receiving power.
10 LINK LED: This LED will illuminate solidly when a live connection with
a compatible receiver is active.
6.2 Rear Panel
DC24V 2.7A USB HDMI OUTHDMI INCAT6A/7 OUT
1 2 3 4 5
1DC 24V/2.7A Port: Plug the 24V/2.7A DC power adapter into this port
and connect it to an AC wall outlet for power.
2USB 2.0 Port (Micro-B) & LED: Connect directly to a standard USB
host such as a PC or laptop to extend their USB functionality to
all currently connected USB devices on both ends of the HDBaseT
connection. The LED will illuminate solidly to indicate when the USB
port is active.
Note: If USB hosts are connected to both the transmitter and receiver at
the same time, only the most recently connected host will be active.
3CAT6A/7 OUT Port: Connect to a compatible HDBaseT receiver with a
single Cat.6A/7 cable for extension of all data signals. PoH will also be
supplied to a connected compatible PD receiver.
Note: The PoH function is designed for powering compatible receiver units
only. Non-PoH receivers will need their own power supply. Receivers from
other brands may not be compatible.
4HDMI IN Port: Connect to HDMI source equipment such as a media
player, game console, or set-top box.
5HDMI OUT port: Connect to an HDMI TV, monitor, or amplier for
digital video and audio output.

5
6.3 IR Cable Pinouts
IR Blaster + IR Extender
1
2
3
4
RxD
3.3V
TxD
GND
4-pin
Terminal Block
6.4 Serial Pinout
1
2
3
4
GND
NC
TxD
RxD
4-pin
Terminal Block
6.5 Audio Pinouts
Stereo Audio Input Stereo Audio Output
1
2
3
GND
RIGHT
LEFT
3-pin Terminal Block
1
2
3
GND
RIGHT
LEFT
3-pin Terminal Block