Dahua Access Standalone User manual

Access Standalone
User’s Manual
V1.0.1

I
Foreword
General
This manual introduces the installation and detailed operations of the Access Standalone
(hereinafter referred to as "the standalone").
Safety Instructions
The following categorized signal words with defined meaning might appear in the manual.
Signal Words Meaning
DANGER
Indicates a high potential hazard which, if not avoided, will result in
death or serious injury.
WARNING
Indicates a medium or low potential hazard which, if not avoided,
could result in slight or moderate injury.
CAUTION
Indicates a potential risk which, if not avoided, could result in
property damage, data loss, lower performance, or unpredictable
result.
TIPS Provides methods to help you solve a problem or save you time.
NOTE Provides additional information as the emphasis and supplement to
the text.
Revision History
Version Revision Content Release Date
V1.0.0 First release. March 2020
V1.0.1 Add recommended installation height. June 2020
About the Manual
The manual is for reference only. If there is inconsistency between the manual and the
actual product, the actual product shall prevail.
We are not liable for any loss caused by the operations that do not comply with the manual.
The manual would be updated according to the latest laws and regulations of related
regions. For detailed information, see the paper manual, CD-ROM, QR code or our official
website. If there is inconsistency between paper manual and the electronic version, the
electronic version shall prevail.
All the designs and software are subject to change without prior written notice. The product
updates might cause some differences between the actual product and the manual. Please
contact the customer service for the latest program and supplementary documentation.
There still might be deviation in technical data, functions and operations description, or
errors in print. If there is any doubt or dispute, please refer to our final explanation.

II
Upgrade the reader software or try other mainstream reader software if the manual (in PDF
format) cannot be opened.
All trademarks, registered trademarks and the company names in the manual are the
properties of their respective owners.
Please visit our website, contact the supplier or customer service if there is any problem
occurred when using the device.
If there is any uncertainty or controversy, please refer to our final explanation.

III
Important Safeguards and Warnings
This Chapter describes the contents covering proper handling of the standalone, hazard
prevention, and prevention of property damage. Read these contents carefully before using the
standalone, comply with them when using, and keep it well for future reference.
Operation Requirement
Do not place or install the standalone in a place exposed to sunlight or near the heat
source.
Keep the standalone away from dampness, dust or soot.
Keep the standalone installed horizontally on the stable place to prevent it from falling.
Do not drop or splash liquid onto the standalone, and make sure there is no object filled
with liquid on the standalone to prevent liquid from flowing into the standalone.
Install the standalone in a well-ventilated place, and do not block the ventilation of the
standalone.
Operate the standalone within the rated range of power input and output.
Do not dissemble the standalone.
Transport, use and store the standalone under the allowed humidity and temperature
conditions.
Electrical Safety
Improper battery use might result in fire, explosion, or inflammation.
When replacing battery, make sure the same model is used.
Use the recommended power cables in the region and conform to the rated power
specification.
Use the power adapter provided with the standalone; otherwise, it might result in people
injury and device damage.
The power source shall conform to the requirement of the Safety Extra Low Voltage (SELV)
standard, and supply power with rated voltage which conforms to Limited power Source
requirement according to IEC60950-1. Please note that the power supply requirement is
subject to the device label.
Connect the device (I-type structure) to the power socket with protective earthing.
The appliance coupler is a disconnection device. When using the coupler, keep the angle
for easy operation.
WARNING
This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This device generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this device does cause

IV
harmful interference to radio or television reception, which can be determined by turning the
device off and on, try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.

V
Table of Contents
Foreword....................................................................................................................................................I
Important Safeguards and Warnings....................................................................................................III
1 Overview.................................................................................................................................................1
Introduction ...................................................................................................................................11.1 Features........................................................................................................................................11.2 Dimensions and Components.......................................................................................................11.3
2 Installation..............................................................................................................................................3
Cable Connections........................................................................................................................32.1 Device Installation.........................................................................................................................32.2
3 System Operation.................................................................................................................................. 6
Button Description.........................................................................................................................63.1 Initialization ...................................................................................................................................63.2 Standby Interface..........................................................................................................................73.3 Unlocking Methods .......................................................................................................................83.4 3.4.1 User Passwords..................................................................................................................8
3.4.2 Administrator Password......................................................................................................9
Main Menu ....................................................................................................................................93.5 User Management ......................................................................................................................103.6 3.6.1 Adding New Users............................................................................................................10
3.6.2 Viewing User information..................................................................................................12
Access Management...................................................................................................................123.73.7.1 Unlock Mode.....................................................................................................................12
3.7.2 Door Status.......................................................................................................................13
3.7.3 Lock Holding Time............................................................................................................14
3.7.4 Door Sensor Type.............................................................................................................14
3.7.5 Remote Verification...........................................................................................................14
Network Communication.............................................................................................................143.8 3.8.1 IPAddress.........................................................................................................................14
3.8.2 Wiegand Configuration.....................................................................................................16
3.8.3 TCP Port...........................................................................................................................17
3.8.4 Serial Port Settings...........................................................................................................17
System ........................................................................................................................................183.9 3.9.1 Time..................................................................................................................................18
3.9.2 Volume Adjustment...........................................................................................................18
3.9.3 ScreenSaver.....................................................................................................................18
3.9.4 Privacy Setting..................................................................................................................19
3.9.5 Card No. Reverse.............................................................................................................19
3.9.6 Auto Test...........................................................................................................................20
3.9.7 Restore to Factory Settings..............................................................................................20
3.9.8 Reboot ..............................................................................................................................20
USB...........................................................................................................................................213.103.10.1 USB Export.....................................................................................................................21
3.10.2 USB Import.....................................................................................................................22
3.10.3 USB Update....................................................................................................................22

VI
3.10.4 Screensaver....................................................................................................................22
3.10.5 Exporting Record............................................................................................................23
System Information...................................................................................................................233.11
4 Web Operation.....................................................................................................................................24
Initialization .................................................................................................................................244.1 Login............................................................................................................................................264.2 Resetting the Password..............................................................................................................264.3 Door Parameter...........................................................................................................................284.4 Alarm Linkage .............................................................................................................................294.5 4.5.1 Setting Alarm Linkage.......................................................................................................29
4.5.2 Alarm Log..........................................................................................................................31
Time Section Configuration.........................................................................................................314.6 4.6.1 Time Section.....................................................................................................................32
4.6.2 Holiday Group Configuration............................................................................................33
4.6.3 Holiday Plan Configuration...............................................................................................34
Data Capacity..............................................................................................................................354.7 Volume Setting............................................................................................................................354.8 Network Setting...........................................................................................................................364.9 4.9.1 TCP/IP ..............................................................................................................................36
4.9.2 Port ...................................................................................................................................37
4.9.3 P2P...................................................................................................................................38
Data Setting ..............................................................................................................................394.10Safety Management..................................................................................................................394.114.11.1 IP Authority......................................................................................................................39
4.11.2 System............................................................................................................................40
4.11.3 User Management ..........................................................................................................40
4.11.4 Maintenance....................................................................................................................41
4.11.5 Configuration Management ............................................................................................42
4.11.6 Upgrade ..........................................................................................................................42
4.11.7 Version Information.........................................................................................................43
4.11.8 Online User.....................................................................................................................43
System Log...............................................................................................................................434.124.12.1 Query Logs.....................................................................................................................44
4.12.2 Backup Logs...................................................................................................................44
Admin Log.................................................................................................................................444.13 Exit ............................................................................................................................................454.14
5 Mobile phone Operation..................................................................................................................... 46
6 Configuration on DSS Pro..................................................................................................................48
Adding Devices ...........................................................................................................................486.1 Access Control Management......................................................................................................516.2 6.2.1 Door Configuration............................................................................................................51
6.2.2 Creating Door Groups ......................................................................................................54
6.2.3 Issuing Access Cards .......................................................................................................55
6.2.4 First Card Unlock..............................................................................................................59
6.2.5 Multi-Card Unlock.............................................................................................................62
6.2.6 Anti-passback ...................................................................................................................67
6.2.7 Remote Verification...........................................................................................................69

VII
6.2.8 Viewing Access Control Records......................................................................................71
6.2.9 Viewing Device Logs ........................................................................................................73
Cybersecurity Recommendations ................................................................................... 75Appendix 1

1
1 Overview
Introduction1.1
The access standalone is an access control panel that supports unlock through fingerprint,
passwords, and card, and supports their combinations.
Features1.2
Support card unlock, fingerprint unlock and password unlock (unlock button and remote
unlock).
Support 30,000 users, 30,000 cards, and 3000 fingerprints.
Store 150,000 access records and 1000 alarm records.
Support duress alarm, tamper alarm, and report the alarm; support 1 alarm input and 1
alarm output.
Support general users, restricted users, guest users, patrol users, VIP users, and other
users.
Voice prompt function.
The timer can work normally for one year after power off.
NTP auto test function.
Dimensions and Components1.3
Front view (mm [inch])Figure 1-1

2
Back view (mm [inch])Figure 1-2
Side and bottom view (mm [inch])Figure 1-3
Table 1-1 Component description
No. Name
1 VA area
2 Doorbell button
3 Fingerprint sensor
4 Card swiping area
5 USB Port

3
2 Installation
Cable Connections2.1
Cable connectionFigure 2-1
Device Installation2.2
The recommended installation height is 1.4–1.6 meters.
The standalone supports surface installation and concealed installation.

4
Surface installation
Surface installationFigure 2-2
Installation Procedure
Stick installation map on the wall, and then drill holes according to hole positions on theStep 1 map.
Insert expansion bolt into installation holes.Step 2 Fix the rear cover onto the wall with self-tapping screws.Step 3 Put machine screws through the bottom hole; lock the front cover on to the rear cover.Step 4

5
Concealed installation
Concealed installationFigure 2-3
Installation Procedure
Draw the cables through the outlet.Step 1 Fix the back cover on the mounted box with screws.Step 2 Neaten the cables and buckle the front cover onto the back cover.Step 3

6
3 System Operation
Button Description3.1
Table 3-1 Button description
Button Description
Go to the first page.
Go to the last page.
Go to the previous page.
Go to the next page.
Go to the previous menu.
Go to the next menu.
Initialization3.2
Administrator password and an email should be set the first time the standalone is turned on;
otherwise the standalone cannot be used.
InitializationFigure 3-1

7
Administrator and password set on this interface are used to log in to the web management
platform.
The administrator password can be reset through the email address you entered if the
administrator forgets the administrator password.
The password should consist of 8 to 32 non-blank characters and contain at least two
types of characters among upper case, lower case, number, and special character
(excluding ' " ; : &).
After the initialization is completed, the standby interface is displayed.
Standby interfaceFigure 3-2
Standby Interface3.3
You can unlock the door through fingerprint, passwords, and card. For details, see Table 3-2.
If there are no operations in 30 seconds, the standalone will go to screensaver mode when
the screensaver is enabled and pictures have been imported for screensaver play;After 30
seconds screensaver play, the standalone go to the standby mode.
The following figures are for reference only, and the actual interface shall prevail.

8
Standby interfaceFigure 3-3
Table 3-2 Homepage description
No. Description
1 Network status.
2 Date & Time: Current date and time.
3 Displays the configured unlock methods.
4 Password unlock icon.
5
Main menu icon.
Only the administrator can enter the main menu.
Unlocking Methods3.4
You can unlock the door through card, password, fingerprint, and the combination mode. For
details, see "3.7.1 Unlock Mode."
3.4.1 User Passwords
Enter the user passwords, and then you can unlock the door.
Tap on the standby interface.Step 1

9
Tap , and enter the user ID, and then tap OK.Step 2 Enter the user password, and then tap OK.Step 3
Tap .Step 4 The door is unlocked.
3.4.2 Administrator Password
Enter the administrator password, and then you can unlock the door. The administrator
password can unlock the door without being subject to user levels, unlock modes, periods,
holiday plans, and anti-passback.
You can only set one administrator password for one standalone.
DSS Pro can issue 100 passwords for one standalone at most.
Administrator is not the password that was set during initialization.
Tap on the homepage.Step 1
Tap .Step 2 Enter the administrator password, and then tap OK.Step 3 The door is unlocked.
You can set and enableAdministrator PWD on the Administrator PWD interface.
Main Menu3.5
Administrators can add users of different levels, set access-related parameters, do network
configuration, view access records and system information, and more in the main menu.
Tap on the standby interface.Step 1

10
Administrator loginFigure 3-4
Select a main menu entering method.Step 2 Main menuFigure 3-5
User Management3.6
You can add new users, view user lists, admin lists, and modify the administrator password on
the User interface.
3.6.1 Adding New Users
You can add new users by entering user IDs, names, importing fingerprints, cards, passwords,
selecting user levels, and more.

11
The following figures are for reference only, and the actual interface shall prevail.
Tap , and then tap .Step 1
New user infoFigure 3-6
Configure parameters on the interface.Step 2
Table 3-3 New user parameter description
Parameter Description
User ID You can enter user IDs. The IDs consist of 18 characters (including numbers and letters, but not special characters), and each ID is unique. The ID will be
allocated when you do not enter one.
Name You can enter names with at most 32 characters (including numbers, symbols,
and letters).
FP Fingerprint registration. Record the user’s fingerprints.
Card Card registration. Record the card information.
PWD The door unlocking password. The maximum length of the ID digits is 8.
Permission
Set the user’s permission: User or Admin.
User: User only has the permission to unlock the door.
Admin: Admin has the permission to unlock the door and configure the
parameters.
Period You can set a period in which the user can unlock the door.
Holiday
Plan You can set a holiday plan in which the user can unlock the door.
Valid Date You can set a period during which the unlocking information of the user is valid.

12
Parameter Description
User Type
General: General users can unlock the door normally.
Restricted: When users in the blacklist unlock the door, service personnel
will get a prompt.
Guest: Guests are allowed to unlock the door certain times in certain
periods. Once they exceed the maximum times and periods, they cannot
unlock the door again.
Patrol: Patrolling users can get their attendance tracked, but they have no
unlock authority.
VIP: When VIP unlocks the door, service personnel will get a prompt.
Other: When special users (such as disabled people and pregnant people)
unlock
the door, there will be a delay of 5 seconds before the door is
closed.
Use Time When the user level is Guest, you can set the maximum number of times that
the guest can unlock the door.
After you have configured all the parameters, tap to save the configuration.Step 3
3.6.2 Viewing User information
You can search user, view user list, admin list, enable administrator password and edit and
delete user information through the User interface.
Access Management3.7
You can do access management on unlock mode, door status, lock holding time, door sensor
type, and remote verification.
Tap to go to the access management interface.
3.7.1 Unlock Mode
When the Unlock Mode is on, users can unlock card, password, fingerprint, and the
combination mode.
Select Assess > Unlock Mode.Step 1