3
2
TECHNICAL CERTIFICATETECHNICAL CERTIFICATE
Description
Greenhouse STRONG is designed for creation microclimate favorable for growing garden crops on
cottage and household plots.
Greenhouse might have variable length depending on customers’ desire. Required length of
greenhouse is provided by purchasing of packages with extending inserts. Each insert add 2m to base
length. Base length is 4m. Height of installed frame is 2.1 m
The frame of the greenhouse is made of galvanized iron and is to be assembled with screws and
angles. Complete set includes all that is needed for fastening of coverage. Greenhouse may be
completed with coverage on buyer’s request. Greenhouse has two door openings and two small
windows in opposite ends.
Greenhouse base requires 3 sheets of cellular polycarbonate 2.1*6m with 6mm thickness. For
each Inserts - 1 sheet of cellular polycarbonate 2.1*6m
Perform assembling and operation of the greenhouse in strict accordance with
the manual and operating rules stated in the technical certificate. Please keep
this technical certificate for further reference.
The company reserves the right to make changes in the greenhouse design
!
Operation rules
Before the start of operation, the greenhouse should be assembled and installed as prescribed in
the manual. When the greenhouse is assembled by a third party the customer should supervise the
quality of works to ensure compliance with the present manual. Some detail have extra holes due
to uniformity of details. During assembly, be careful not to damage the parts, because until they
a diameter of 4mm or mandrel with a conical end. During assembly of the frame details’ connections
assembly rules and cause of removal warranty support by manufacturer.
Do not install the greenhouse too close to buildings or trees where masses of snow/ice can fall on it.
Recommended distance is at least 2 m. The greenhouse is designed to withstand wind at the speed
below 24 m/sec. The greenhouse cladding should not be removed for the winter period if snow load is
limited. If the greenhouse is left unattended for the entire winter the customer should either remove
the cladding or estimate the possible snow load. For the frame assembled with all parts including
strainers and braces, the maximal snow load begins when the layer of snow weight is 180 kg per 1
sqm of horizontal surface, which corresponds to regulative snow load of IV snow region (in accordance
against snow load in the following areas: Northen areas in Russia, the Scandinavian countries:
Finland, Sweden,
Norvey, Denmark.
Warranty liabilities
1. The manufacturer is responsible for the completeness of the product.
2. The manufacturer is responsible for assemblability of the greenhouse in accordance with the
instructions.
4. Term for making claims is 24 months from the day of purchase
Terms of warranty provisions
Cleaning and washing sheets of polycarbonate.
Warranty does not apply to cases of:
1. Greenhouse installation in violation of instruction requirements
2. Violation of the rules of operation.
3. Inappropriate use of the greenhouse.
4. Deformation of the greenhouse as a result of ground movement.
5. Floods, hurricanes and other natural disasters.
1. Rinse the sheet with warm water.
2. Wash the sheet with a solution of mild soap or with a household detergent and warm water,
using a soft rag or a sponge to remove dirt.
3. Rinse with cold water and wipe with a soft cloth.
Never use abrasives or highly alkaline cleaning compositions for cleaning polycarbonate
sheets. Dry rubbing of the surface will damage the protective layer of the cladding and shorten
its shelf life. Never rub the surface of polycarbonate sheets with brushes, metallic cloth or other
abrasive materials.
When disinfecting the greenhouse from pathogens causing fungal and bacterial diseases, do
not use «sulfur blocks» to avoid frame corrosion (blackening).
