Daymak Boomerbuggy Power Folding User manual

boomerbuggy power folding
User Manual

2
Safety
For your safety, please ensure the following:
• Check and make sure that your mirrors are ghtened and allow for maximum
visibility
• Observe all trac rules, and do not operate in areas where motorized vehicles are
not allowed.
• Make sure that your baery power is sucient before you go out to ride
• If you bring your charger avoid shaking / raling charger while riding.
• Do not over charge the baery by leaving the charger in the charging port. Once
the baery is fully charged remove the charger immediately.
• Do not try to operate the unit while charging.
• Do not let anyone uner the age of 16 years old operate this vehicle.
• Do not make sharp / abrupt turns at high speeds to avoid pping.
• Do not operate under the inuence of any use of drugs or alcohol
• Do not completely submerge the unit in water
• Do not operate in harsh weather condions.
For any quesons or concerns please call
1-800-649-9320 or visit www.daymak.com

3
About Daymak
Daymak is one of Canada’s largest Alternave Vehicle providers. We design, engineer,
manufacture, import and repair everything from recreaonal dirt Mobility Scooters, go-
karts and electric golf cars to alternave transportaon soluons such as Mobility Scooters
electric scooters.
Our electric bicycles represent an energy-ecient and eco-friendly alternave for
people who need to get around the city. They greatly increase the praccality of bicycle
transportaon in urban centres. Cosng only a few cents to charge, an Mobility Scooter
can make city life more convenient and much less expensive.
While there are many new Green technologies that are sll in their infancy, electric bicycles
have been developing over the last 40 years or more. Mobility Scooter technology has
been dramacally rened since the introducon of the rst custom-conversion bicycles.
Today, electric bicycles are a supremely reliable and aordable means of transportaon.
Daymak is constantly developing new eco-friendly alternave transportaon strategies,
led by its own Research and Development department in Toronto, Canada. We are always
improving our products. Our innovave in-house engineering and quality tesng provide
customers with many new kinds of reliable, eco-friendly vehicles, designed to help change
the lives of our customers and the world.
Daymak warranes, services, and stocks parts for everything it sells. We support our
products. Please feel free to visit our website. You’ll nd the latest in cool transportaon
soluons, support for the products you’ve purchased and contact informaon.

4
Introduction
Mobility Scooters
Using an electric bicycle is a great way to ride around town conveniently and
economically. Mobility Scooters represent a natural progression in the development of
urban transportaon. Using only small amounts of electricity, Mobility Scooters have the
potenal to radically reduce the amount of polluon in our cies. They are also very
quiet, so they do not add to the high levels of noise polluon which we oen take for
granted. They are easy, and usually free to park. They are unobtrusive and highly praccal
addions to the urban landscape.
Mobility Scooters are also inexpensive. They (currently) require no registraon, no
insurance, no licence and do not incur parking charges. Compared to internal combuson
engines, the engines in electric vehicles have fewer moving parts and require far less
maintenance. Your Daymak Mobility Scooter is the result of Daymak’s years of experience,
the highly trained technical skills of our sta, and careful ongoing design work by our
engineers. We hope you enjoy using this product and welcome any feedback that you
may have.
New Laws
Most provinces in Canada, most states in the U.S.A, the United Kingdom and many
European countries have new laws that permit cyclists to use electric motors to assist the
regular operaon. Please check with your provincial or state government to learn about
your local laws.
Liability
Daymak does not assume any liability for damages, loss of prots, or claims from third
pares due to improper use of this product. Daymak does not assume any liability for
damages due to problems with the product resulng from service by a third party that is
not cered by Daymak.
The informaon in this guide may be subject to change without noce. For the latest
informaon available, please contact your local Daymak dealer or visit our website.
We have taken all possible measures to ensure the accuracy and completeness of the
informaon in this guide. However, if you do nd anything missing, incomplete or wrong,
do not hesitate to contact us.

5
Table of Contents
• SAFETY 2
• ABOUT DAYMAK 3
• INTRODUCTION 4
• PART DIAGRAMS 6
• RIDING INSTRUCTIONS 7
• THE BATTERY 12
• CHARGING YOUR MOBILITY SCOOTER 13
• UNDERSTANDING YOUR VOLTAGE 14
• CHARGING THE BOOMERBUGGY POWER FOLDING 15
• OPERATION 17
• FOLDING YOUR UNIT 19
• PARKING BRAKE 21
• VEHICLE IDENTIFICATION NUMBER (VIN) 21
• TECHNICAL DATA 22
• MAINTENANCE AND TROUBLESHOOTING 23
• SPECIFICATIONS 27

6
Part Diagrams
Diagram 1: Boomerbuggy Power Folding
This diagram illustrates the various parts of your mobility scooter. Please note that many of
these parts are not user-serviceable and should be repaired only by trained professionals.
This is especially true of the electrical systems and the mechanical components.
1. Display
2. Push / Pull Thro le
3. Handlebar Latch
4. Tire
5. Foot Ma / Ba ery Storage
6. Manual Fold Bu on
7. Charge Port
8. Parking Brake
9. Arm Rests
10. Seat
1. Display
6. Manual Fold Bu on

7
Riding Instructions
This guide assumes that you already know have operated a mobility scooter. If you have
never used a mobility scooter before, we strongly recommend that you read throught this
guide enrely before beginning to operate.
Cauon
Always make sure to be properly situated on the unit before turning it on and engaging
the throle. Failing to do so can potenally lead to injuries or damage of the vehicle.
Important Notes
• Mobility scooters are Fast! Mobility scooters are capable of traveling at higher
speeds than many people are accustomed to. Use cauon at all mes, especially when
travelling in mixed trac. Always take into account driving and traveling condions.
• Obey the Law. Be sure to follow all provincial and city trac laws. This
includes obeying stop signs, checking carefully when turning, and riding
defensively. A mobility scooter is a motorized vehicle, and thus you must
follow the law.
• Stay Sober. Never ride your mobility scooter while intoxicated. Mobility scooters can
cause harm to the rider and others if not operated properly and require full aenon
during operaon.
• Mobility scooters are to be rode on the sidewalk unless there is no sidewalk
present. Please be mindful of all pedestrians on the sidewalk and give ample noce
when passing by.

8
Items to Carry with the Electric Mobility Scooter
It is a good idea to carry the following items with you at all  mes when you ride your
Mobility Scooter.
• The charger, to charge the mobility scooter in case the ba ery power runs
out.
• 30 Amp Fuse, spares for the ba eries, in case the fuses blow (if applicable).
• A lock, to secure your Mobility Scooter when you park it.
Inspecting your Mobility scooter
Always inspect your mobility scooter before you ride it, to make sure its safety features
are opera ng properly. Many accidents can be avoided with rou ne inspec ons. Once you
are comfortable with your mobility scooter, you will be able to detect small changes in the
way it feels. If anything changes between uses, make sure to have it properly examined.
Also, be sure to listen for changes in the sounds your mobility scooter makes over  me.
Any mechanical or power issues may have e ects on the sounds the mobility scooter
makes.
Holding the Handlebars
As you would with a bicycle, place your  ngers over the brake levers (if your scooter has
disc/drum brakes), using the palms of your hand and your thumbs to wrap around and
under the handlegrips. Doing this allows you to ac vate the brakes easily, by squeezing
your hand, in case you have to stop quickly. Otherwise hold onto the handle bar in a
manner where you can easily push the brake mechanism. This is the safe way to control
your mobility scooter.
Turning your Mobility scooter On and Off
To turn on your mobility scooter, insert your key into the key hole and turn the key to the
on posi on.

9
Accelerating and Decelerating
The throle is typically found on the right handlebar (see operaon for more informaon.)
Use this carefully when situated on the mobility scooter to go forward and release to
decelerate.
Warning
Do not acvate the accelerator unl you are seated on the mobility scooter and are ready
to accelerate. The mobility scooter can easily escape from your control, possibly injuring
you or others, and the mobility may be damage.
Stopping
Your Mobility Scooter has brakes, at the rear of your scooter. The Boomerbuggy Power
Folding has electronic brakes that engage as soon as you release the throle.
Safety Tips
• When you are traveling in wet weather, water may cause your brakes to funcon
less eciently because it reduces fricon between the brake pads and the wheels.
• Take care to slow down and give yourself more room to stop or slow if necessary.
• It is a good idea to have your brakes and brake pads checked regularly. The brake
pads will eventually wear down through fricon, and aer signicant use will have to
be replaced.
Warning
When you acvate the Mobility Scooter, the electrical system becomes live. Do not try to
aect changes to the Mobility Scooter (such as removing the baery or repairing electrical
components) while the Mobility Scooter is acvated. Turn the Mobility Scooter o and
remove the key before you aempt to access any of the electrical components. Also, the
baery carries a signicant electric charge and can injure people if not treated properly
and with respect.

10
Signalling
The Horn
The mobility scooter has a horn. Use this when coming close to pedestrians to warn of
your passing. See the operaon secon for where to nd your horn and how to use it.
Riding in Wet Weather
Your mobility scooter is designed to funcon in wet condions, such as when it is raining.
However, it is easy to slip when moving at high speeds. If it is very wet, be sure to avoid high
speeds. When you are traveling in wet weather, water may cause your brakes to funcon
less eecvely because it reduces fricon between the brake pads and the wheels. Take
care to slow down and give yourself more room to stop or slow if necessary.
The Motor and Water
Your mobility scooter is not designed to be immersed in water. Always ensure that the
water level does not go above the motor, to prevent water from geng inside of it. Water
in the motor can cause short-circuits and may damage the electrical systems in your
Mobility Scooter.

11
Riding in Cold Weather
Your mobility scooter is designed to operate year-round. However, in very cold condions
or when there is a lot of snow or slush on the ground, it is possible for the motor in the
mobility scooter to get wet or for the brakes to funcon less eecvely, just as it can
happen in wet weather. Below 10 degrees Celsius, the baery will not work as well as it
would in warmer temperatures. While Lithium-Ion baeries perform beer than Lead-
Acid baeries in temperature extremes, both will experience reduced performance in
cold temperatures.
Also, riding the mobility scooter in cold temperatures may require you to replace the
baery sooner rather than later.
Maximum Load
Do not exceed the maximum load capabilies of your mobility scooter. You can nd the
exact loading capacity listed in the technical specicaons in this guide.
If you exceed the maximum load, the performance of the scooter will suer.
Exceeding the maximum load of your Mobility Scooter could cause damage to the shocks,
to the mechanism and, ulmately, even to the frame. It could also cause your motor to
work too aggressively, and may cause it to burn out.
Long-Term Storage of your MOBILITY SCOOTER
If you are storing your Mobility Scooter for a long period, disconnect the circuit breaker
(if applicable). This is a safer way to store the electric bicycle, as it prevents accidental
acvaon of the mobility scooter and makes it impossible to acvate it even with the key.
Please see the secon tled “The Baery” for instrucons on baery maintenance while
your mobility scooter is being stored.

12
The Battery
This secon details what you need to know about the baery that powers your mobility
scooter. Always remember to treat your mobility scooters electrical systems with respect.
Battery Power
The dashboard has a baery charge indicator. When the mobility scooter is acvated,
the guage will jump and indicate the currently available baery power. If the power has
dropped signicantly, you should charge your scooter.
Distance and Power
Your baery has the capacity to carry you anywhere from 20+ km before it must be
recharged. The ability of your baery to power your bicycle depends on many variables.
These variables include the weight of the rider, the prevailing wind resistance, the rider’s
driving habits, the presence of steep hills and inclines.
Saving Power
If you are traveling long distances, you can save a lot of electricity by using beer driving
habits:
• Coasng: When going downhill or over long, at road surfaces, try using your e-
Mobility Scooter’s momentum and allow it to coast, without drawing power from the
motor.
• Stopping and Starng: Try to avoid stop and go movements. The motor draws
more power when starng from a full stop.
• Weight: Remove unnecessary weight from the scooter. This reduces the amount
of power the motor must draw.

13
Charging your Mobility Scooter
Charging your scooter is a simple process. You require the following:
• The charger that came with your Mobility Scooter.
• A 110V household electrical outlet.
Charger Warning
Only use the chargers that were supplied with your mobility scooter. Using chargers that
do not have specicaons idencal to those which came with the mobility scooter could
irreparably damage your scooter’s baery and electrical systems, and may cause injury.
To charge your scooter, follow these steps:
1. Turn o the mobility and remove the key from the ignion (if applicable).
2. Plug the female end of the charger cable into the charging slot on the mobility
scooter.
3. Plug the male end of the charger power cable into your wall socket. This should be
a 110v household electricity supply. You can also use a portable generator, if necessary,
but make sure it provides 110V current.
4. Allow the mobility scooter baery to charge for the appropriate amount of me
(4-8 hours).
5. Disconnect the charger when the LED light on the charger is green. The baeries
have been fully charged.
If your charger’s LED status light does not change from red to green over an extended
period of me, for perhaps more than 14 hours, and the baery is very hot, the baery
or charger may need replacing. Stop charging and bring both to your Daymak dealer
immediately. Do not overcharge the baery.

14
Understanding your voltage
Electric scooters primary power is understood as voltage. This number in short is how
powerful your unit is, and as it dips down when the unit will no longer be able to perform.
Depending on your unit’s voltage and baery type (Lithium vs Lead Acid) will eect the
range of voltage between what is fully charged and when it exceeds the low voltage
threshold.
Low Voltage Threshold
Your unit will try to protect the baery by prevenng the motor from drawing power below
the Low Voltage Threshold. By doing this it will signicantly increase the life expectancy of
your unit. If you nd that your motor starts cung o at a certain speed or not engaging
at all it may be because your voltage is dropping past the threshold point and needs to be
charged. To see what your voltage threshold you can check on it via the bluetooth APP (if
applicable) and you can check it out using this chart.
Voltage Chart
LITHIUM Full/Low Voltage Reading
Depending on the way your lithium baery’s composion will impact what the low
voltage and full charge reading should be. Underneath each reading on the above chart
shows a number and a “S” this represents how many series are in your baery pack. To
know the exact series of your baery contact your local Daymak dealer.
Lead Acid Lithium ion
Full charge Low Voltage Full charge Low Voltage
48V 53V 42V
60V 67V 53V
24V 27V 21V
36V 40V 32V
54.6V / 58.8V 37V / 40V
67.2 / 71.4V 45V / 48V
29.4V 20V
42V 28V
7 S 7S
16 S 17 S 16 S 21 S
20 S 21 S 20 S 21 S
Voltage
10S 10 S

15
Charging the Boomerbuggy
Power Folding
• 1) Charge Port - Plug your charger into this port to charge the ba ery. Once the
Mobility Scooter is charging the charger will glow red. When the unit is fully charged
the charger will glow green and then your Mobility Scooter is ready to go. This will
charge both ba eries simultaneously.
Warning
Do not leave the Boomerbuggy Power Folding charging for long periods of  me a er it is
fully charged. Once the Mobility Scooter is charged unplug it ASAP.
The Boomerbuggy Power Folding comes with a lithium Ion ba ery that can be charged
both inside and outside of the unit.
To charge each ba ery individually outside of the unit, li the  oor mat up and pull
out each ba ery 1 at a  me. Using the charger adapter seen below, connect this to the
charger and then connect the charger to the port on the back of the ba ery.
To charge each ba ery individually outside of the unit, li the  oor mat up and pull
To charge each ba ery individually outside of the unit, li the  oor mat up and pull

16
Battery Care
Follow these suggesons to maintain your baery’s opmal performance. If you do not
follow these suggesons, your baery may lose its ability to maintain a charge and might
have to be replaced sooner than would otherwise be necessary.
• Charge it: Charge your baery immediately aer riding it.
• Full Charge: Do not allow the baery to run down completely and lie in storage
without a charge. This signicantly reduces the baery’s lifespan and may cause
damage.
• Keep it Charged: When being stored, charge the baery occasionally to make
sure its power supply does not run down. Charging it once every 21 days should be
sucient.
• Storage Condions: Store the baery on a at, cool, dry surface. Do not allow the
baery temperature to drop below 10 degrees Celsius for extended periods of me.
Warning
DO NOT place your Lead-Acid baery on concrete. Concrete drains the baery’s power
and will neutralize the lead-acid. Placing the baery on concrete for any length of me
will likely result in the baery being drained of power and possibly losing its ability to
store electricity.
Cold Weather and your Battery
Below 10 degrees Celsius, the baery will not work as well as it would in warmer
temperatures. While Lithium-Ion baeries perform beer than Lead-Acid baeries in
temperature extremes, both will experience reduced performance in cold temperatures.
Also, repeatedly riding the Mobility Scooter in cold temperatures may cause your baery
to have to be replaced sooner.
Replacement and Disposal
Aer approximately 300 charges, a lead-acid baery will need to be replaced. A lithium-
ion baery will last approximately 1000 charges. When the baery has to be replaced,
you will noce that your baery cannot carry as much of a charge as it could inially.
Contact your local Daymak dealer to purchase a new baery.
When replacing your baery, dispose of it at a proper municipal baery recycling facility.
If none is available, please contact your local Daymak dealer.

17
Operation
Congratula ons on your new Boomerbuggy Power Folding mobility scooter. On the Boomerbuggy
Power Folding you will  nd a push a pull thro le here is how it works.
HORN
In the middle you will  nd a yellow bu on,
press this to honk the horn.
With the push / pull thro le, you can
engage the motor forwar or reverse with
either hand. Great for le ies and righ es,
or anyone with a disability.
• 1) Push - Push this lever away from
you to go forward
• 1) Pull - Pull this lever toward you to
go in reverse
• 2) Push - Push this lever toward you
to go in reverse
• 2) Pull - Pull this lever away from
you to go forward

18
brakes
The Boomerbuggy Power Folding comes with electronic brakes that acvate as soon as
you release the throle. It's as simple as that!
Display
The Boomerbuggy Power Folding display has a few key features to help you understand
and congure your mobility scooter.
USB charge port
The Boomerbuggy Power Folding comes
with a USB charge port that allows you
to charge your smart phone or any
other device via USB cable.
1. Baery meter - This shows how
much power you have le before you
need to charge it. All lights will light up
once it is fully charge and as you lose
power the lights will slowly fade. Once
you are in the orange area you are very
low and at red you are about to lose
power.
2. Ignion - Use this to turn on and o
the machine.
3. Speed Adjustment - Turn this
towards the rabbit to go faster and turn
towards the turtle to go slower.

19
FOLDING YOUR UNIT
The Boomerbuggy Power Folding is incredibly simple and can be folded with a buon on
the machine or with the remote.
On the back of the unit you will nd a
buon like this. Posion 1 will allow it the
unit to be folded via Remote, Posion 0
will not allow it to be folded and posion
2 will allow it be folded by the manual
fold buon.
To fold it with the manual fold buon,
make sure that the above seng is on
(2). Then simply press and hold the fold
or unfold buon as needed.
To fold it with the remote buon, make
sure that the above seng is on (1). Then
simply press and hold buon (1) to fold it
or buon (2) to unfold buon it.
Do not aempt to unfold or fold the unit while
sing on the unit.

20
ARm Rests
The Boomerbuggy Power Folding comes with adjustable arm rests. The arm rests can be
li ed up and down to make it easier for you to get on and o the scooter.
Adjusting the width
The width of the arm rests can
be adjusted as well. To adjust
them turn the two knobs
counterclockwise un l they are
loose, and then slide the arm
rests to the desired posi on. Then
 ghten them with the same knobs
by turning them clockwise again.