Daymak Escooterinabox Deluxe User manual

escooterinabox
User Manual DEluxe

2
Safety
When operang the Escooterinabox Deluxe please make sure you adhere to the following:
• Always wear a helmet when riding the Escooterinabox Deluxe.
• Always check your blind spots when operang the vehicle.
• Turn on headlights when in need of addional visibility.
• Make sure that your baery power is sucient before you go out to ride.
• Obey all laws of the road.
• Periodically charge the unit when not in use for long periods of me
• If you bring your charger avoid shaking / raling charger while riding.
• Do not over charge the baery by leaving the charger in the charging port. Once
the baery is fully charged remove the charger immediately.
• Do not try to operate the unit while charging.
• Do not let anyone uner the age of 16 years old operate this vehicle.
• Do not make sharp / abrupt turns at high speeds to avoid pping.
• Do not operate under the inuence of any use of drugs or alcohol
• Do not completely submerge the unit in water
• Do not operate in harsh weather condions.
For any quesons or concerns please call
1-800-649-9320 or visit www.daymak.com

3
About Daymak
Daymak is one of Canada’s largest Alternave Vehicle providers. We design, engineer,
manufacture, import and repair everything from recreaonal dirt bikes, go-karts and
electric golf cars to alternave transportaon soluons such as e-bikes electric scooters.
Our electric bicycles represent an energy-ecient and eco-friendly alternave for
people who need to get around the city. They greatly increase the praccality of bicycle
transportaon in urban centres. Cosng only a few cents to charge, an e-bike can make
city life more convenient and much less expensive.
While there are many new Green technologies that are sll in their infancy, electric
bicycles have been developing over the last 40 years or more. E-bike technology has been
dramacally rened since the introducon of the rst custom-conversion bicycles. Today,
electric bicycles are a supremely reliable and aordable means of transportaon.
Daymak is constantly developing new eco-friendly alternave transportaon strategies,
led by its own Research and Development department in Toronto, Canada. We are always
improving our products. Our innovave in-house engineering and quality tesng provide
customers with many new kinds of reliable, eco-friendly vehicles, designed to help change
the lives of our customers and the world.
Daymak warranes, services, and stocks parts for everything it sells. We support our
products. Please feel free to visit our website. You’ll nd the latest in cool transportaon
soluons, support for the products you’ve purchased and contact informaon.

4
Introduction
Electric scooters
Using an electric scooter is a great way to ride around town conveniently and
economically. Electric scopters represent a natural progression in the development of
urban transportaon. Using only small amounts of electricity, electric scooter have the
potenal to radically reduce the amount of polluon in our cies. They are also very
quiet, so they do not add to the high levels of noise polluon which we oen take for
granted. They are easy, and usually free to park. They are unobtrusive and highly praccal
addions to the urban landscape.
Electric Scooters are also inexpensive. They (currently) require no registraon, no
insurance, no licence and do not incur parking charges. Compared to internal combuson
engines, the engines in electric vehicles have fewer moving parts and require far less
maintenance. Your Daymak electric scooter is the result of Daymak’s years of experience,
the highly trained technical skills of our sta, and careful ongoing design work by our
engineers. We hope you enjoy using this product and welcome any feedback that you
may have.
New Laws
Most provinces in Canada, most states in the U.S.A, the United Kingdom and many
European countries have new laws that permit cyclists to use electric motors to assist the
regular operaon of scooters. Please check with your provincial or state government to
learn about your local laws.
Liability
Daymak does not assume any liability for damages, loss of prots, or claims from third
pares due to improper use of this product. Daymak does not assume any liability for
damages due to problems with the product resulng from service by a third party that is
not cered by Daymak.
The informaon in this guide may be subject to change without noce. For the latest
informaon available, please contact your local Daymak dealer or visit our website.
We have taken all possible measures to ensure the accuracy and completeness of the
informaon in this guide. However, if you do nd anything missing, incomplete or wrong,
do not hesitate to contact us.

5
Table of Contents
• SAFETY 2
• ABOUT DAYMAK 3
• INTRODUCTION 4
• PART DIAGRAMS 6
• RIDING INSTRUCTIONS 7
• THE BATTERY 12
• CHARGING YOUR ESCOOTER 13
• CHARGING THE ESCOOTERINABOX DELUXE (DIRECT) 14
• ASSEMBLING THE ESCOOTERINABOX DELUXE 15
• OPERATION 17
• FOLDING THE ESCOOTERINABOX DELUXE 19
• MAINTENANCE AND TROUBLESHOOTING 20
• ESCOOTER MAINTENANCE 22

6
Part Diagrams
Diagram 1: Escooterinabox Deluxe
This diagram illustrates the various parts of your scooter. Please note that many of these
parts are not user-serviceable and should be repaired only by trained professionals. This
is especially true of the electrical systems and the mechanical components.
1. Display
2. Thro le
3. Folding Clip (Top)
4. Brakes
5. Folding Latch
6. Motor
7. Charge Port
8. Kickstand
9. Folding Clip (Rear)
1. Display
6. Motor

7
Riding Instructions
This guide assumes that you already know how to ride a standard scooter. Before you try
to ride an electric scooter, you should be very familiar with controlling and balancing a
normal scooter.
Cauon
If you do not have scooter experience, an electric scooter is too dangerous to ride. Do not
begin learning to ride a scooter using an electric scooter.
Important Notes
• Electric scooters are Fast! Electric scooters are capable of traveling at higher speeds
than many scooter riders are accustomed to. Use cauon at all mes, especially when
travelling in mixed trac. Always take into account driving and traveling condions.
• Obey the Law. Be sure to follow all provincial and city trac laws.
This includes obeying stop signs, checking carefully when turning, and
riding defensively. An Electric scooters is a motorized vehicle. You must
follow the law.
• Stay Sober. Never ride your electric scooter while intoxicated. An electric scooter is
capable of traveling faster than a normal scooter, and you should always be in control
of it.
• Share the Road. Be careful in mixed trac. Let vehicles that are faster than you
• Overtake you and give ample room for vehicles travelling slower.

8
Items to Carry with the Electric Scooter
It is a good idea to carry the following items with you at all mes when you ride your
electric scooter.
• A lock, to secure your escooter when you park it.
• A helmet, as required by safety laws.
Inspecting your Electric Scooter
Always inspect your escooter before you ride it, to make sure its safety features are
operang properly. Many accidents can be avoided with roune inspecons. Once you
are comfortable with your escooter, you will be able to detect small changes in the way it
feels. If anything changes between uses, make sure to have it properly examined. Also, be
sure to listen for changes in the sounds your escooter makes over me. Any mechanical
or power issues may have eects on the sounds the scooter makes.
Holding the Handlebars
As with a normal scooter, place your ngers over the brake levers, using the palms of your
hand and your thumbs to wrap around and under the handlegrips. Doing this allows you
to acvate the brakes easily, by squeezing your hand, in case you have to stop quickly. This
is the safe way to control your electric scooter.
Turning your Electric scooter On and Off
To turn on your electric scooter, press and hold the power buon. When your escooter
is acvated, the power indicator will light and the baery charge indicator will jump,
showing you how much power your escooter has. To turn o the escooter, simply press
and hold the power buon again.

9
Warning
When you acvate the escooter, the electrical system becomes live. Do not try to aect
changes to the escooter (suchrepairing electrical components) while the escooter
is acvated. Turn the escooter o before you aempt to access any of the electrical
components. Also, the baery carries a signicant electric charge and can injure people if
not treated properly and with respect.
Accelerating and Decelerating
The throle is found on the right-side hand grip on the handlebars. Press the push throle
away from you to accelerate. To decelerate, release the throle. Don’t over-push the
accelerator, as this could damage the baery and electrical components.
Warning
Do not acvate the accelerator unl you are situated on the scooter and are ready to
accelerate. The escooter can easily escape from your control, possibly injuring you or
others, and the escooter may be damaged by being dropped.
Stopping
Your escooter has brakes at the rear. The lever aached to the handlebars, on the le,
acvate the brakes. Pull the levers toward you to acvate the brakes.
When the brakes are acvated, the power to the engine is automacally turned o, unl
you release the brakes. This allows you to stop safely.
Safety Tips
• When you are traveling in wet weather, water may cause your brakes to funcon
less eciently because it reduces fricon between the brake pads and the wheels.
• Take care to slow down and give yourself more room to stop or slow if necessary.
• It is a good idea to have your brakes and brake pads checked regularly. The brake
pads will eventually wear down through fricon, and aer signicant use will have to
be replaced.

10
Signalling
The Bell
The escooter has a bell. The bell is on the le handlebar. Simply twist the ringer to ring it.
Lights
The headlight and tail light are useful features when you are riding at night or in dark
areas. They radically improve your safety in mixed trac. The lights on your escooter
consume some electricity. Keeping them on may reduce the maximum distance you can
travel on one charge by about 5 %.
Riding in Wet Weather
Your escooter is designed to funcon in wet condions, such as when it is raining. However,
because the motor is on the rear wheel, it is easy to slip when moving at high speeds. If
it is very wet, be sure to avoid high speeds. When you are traveling in wet weather, water
may cause your brakes to funcon less eecvely because it reduces fricon between the
brake pads and the wheels. Take care to slow down and give yourself more room to stop
or slow if necessary.
The Motor and Water
Your escooter is not designed to be immersed in water. Always ensure that the water level
does not go above the middle of the re, to prevent water from geng inside the motor.
Water in the motor can cause short-circuits and may damage the electrical systems in
your escooter.

11
Riding in Cold Weather
Your escooter is designed to operate year-round. However, in very cold condions or
when there is a lot of snow or slush on the ground, it is possible for the motor in the
escooter to get wet or for the brakes to funcon less eecvely, just as it can happen
in wet weather. Below 10 degrees Celsius, the baery will not work as well as it would
in warmer temperatures. While Lithium-Ion baeries perform beer than Lead-Acid
baeries in temperature extremes, both will experience reduced performance in cold
temperatures.
Also, riding the escooter in cold temperatures may require you to replace the baery
sooner rather than later.
Maximum Load
Do not exceed the maximum load capabilies of your scooter. You can nd the exact
loading capacity listed in the technical specicaons in this guide.
If you exceed the maximum load, the performance of the scooter will suer.
Exceeding the maximum load of your escooter could cause damage to the shocks, to the
mechanism and, ulmately, even to the frame. It could also cause your motor to work too
aggressively, and may cause it to burn out.
Long-Term Storage of your E-scooter
If you are storing your escooter for a long period, disconnect the circuit breaker. This is a
safer way to store the electric scooter, as it prevents accidental acvaon of the e-scooter
and makes it impossible to acvate it even with the key.
Please see the secon tled “The Baery” for instrucons on baery maintenance while
your escooter is being stored.

12
The Battery
This secon details what you need to know about the baery that powers your escooter.
Always remember to treat your escooter electrical systems with respect.
Battery Power
The dashboard has a baery charge indicator. When the escooter is acvated, the guage
will jump and indicate the currently available baery power. If the power has dropped
signicantly, you should charge your escooter.
Distance and Power
Your baery has the capacity to carry you anywhere from 20+ km before it must be
recharged. The ability of your baery to power your scooter depends on many variables.
These variables include the weight of the rider, the prevailing wind resistance, the rider’s
driving habits, the presence of steep hills and inclines, and other issues such as proper air
pressure in the res.
Saving Power
If you are traveling long distances, you can save a lot of electricity by using beer driving
habits:
• Coasng: When going downhill or over long, at road surfaces, try using your e-
scooter’s momentum and allow it to coast, without drawing power from the motor.
• Stopping and Starng: Try to avoid stop and go movements. The motor draws
more power when starng from a full stop.
• Weight: Remove unnecessary weight from the scooter. This reduces the amount
of power the motor must draw.
• Air Pressure: Make sure your res have the proper air pressure. Proper pressure
reduces drag on the res and radically increases the eciency of any vehicle.
• Head and Tail Lights: Turn o the lights to conserve power, if it is safe to do so.
The lights will reduce the distance you can travel by about 5%.

13
Charging your Escooter
Charging your escooter is a simple process. You require the following:
• The charger that came with your escooter.
• A 110V household electrical outlet.
Charger Warning
Only use the chargers that were supplied with your e-cooter. Using chargers that do not
have specicaons idencal to those which came with the e-scooter could irreparably
damage your e-scooter’s baery and electrical systems, and may cause injury.
To charge your e-scooter, follow these steps:
1. Turn o the e-scooter.
2. Plug the female end of the charger cable into the charging slot on the escooter.
3. Plug the male end of the charger power cable into your wall socket. This should be
a 110v household electricity supply. You can also use a portable generator, if necessary,
but make sure it provides 110V current.
4. Allow the escooter’s baery to charge for the appropriate amount of me
.
5. Disconnect the charger when the LED light on the charger is green. The baeries
have been fully charged.
If your charger’s LED status light does not change from red to green over an extended
period of me, for perhaps more than 12 hours, and the baery is very hot, the baery
or charger may need replacing. Stop charging and bring both to your Daymak dealer
immediately. Do not charge the baery.

14
Charging the Escooterinabox
Deluxe
To charge the Escooterinabox Deluxe, please do the following:
Once the scooter is charging the charger will glow red. When the unit is fully charged the
charger will glow green and then your scooter is ready to go.
Warning
Do not leave the Escooterinabox Deluxe charging for long periods of me aer it is fully
charged. Once the scooter is charged unplug it ASAP.

15
Assembling the escooterinabox

16
Battery Care
Follow these suggesons to maintain your baery’s opmal performance. If you do not
follow these suggesons, your baery may lose its ability to maintain a charge and might
have to be replaced sooner than would otherwise be necessary.
• Charge it: Charge your baery immediately aer riding it.
• Full Charge: Do not allow the baery to run down completely and lie in storage
without a charge. This signicantly reduces the baery’s lifespan and may cause
damage.
• Keep it Charged: When being stored, charge the baery occasionally to make
sure its power supply does not run down. Charging it once every 21 days should be
sucient.
• Storage Condions: Store the baery on a at, cool, dry surface. Do not allow the
baery temperature to drop below 10 degrees Celsius for extended periods of me.
Cold Weather and your Battery
Below 10 degrees Celsius, the baery will not work as well as it would in warmer
temperatures. While Lithium-Ion baeries perform beer than Lead-Acid baeries in
temperature extremes, both will experience reduced performance in cold temperatures.
Also, repeatedly riding the escooter in cold temperatures may cause your baery to have
to be replaced sooner.
Replacement and Disposal
Aer approximately 300 charges, a lead-acid baery will need to be replaced. A lithium-
ion baery will last approximately 1000 charges. When the baery has to be replaced,
you will noce that your baery cannot carry as much of a charge as it could inially.
Contact your local Daymak dealer to purchase a new baery.
When replacing your baery, dispose of it at a proper municipal baery recycling facility.
If none is available, please contact your local Daymak dealer.

17
Operation
display / handlebar
1. Bell - Flick this li le lever to
ring the bell
2. Brakes - Pull this lever
towards you to engage the
brakes. This must be released
before engaging the motor
again.
3. Folding Clip (Top) - Use this
to clip onto the Folding Clip
(Rear) so that you can hold it all
together. More informa on on
folding on the next page.
4. Thro le - Press this down to
engage the motor. You must kick o manually before the thro le can be engage
5. Speedometer - Shows you the speed you are travelling at.
6. Gear - This shows what speed the scooter is in. The  rst gear gives the longest
range, the last gear gives the fastest speed
7. Power bu on / Lights / Gear Shi - Press and hold this bu on to turn on and o
the scooter. Press quickly to turn on and o the headlights. Double press this to change
gears.
8. Ba ery meter - Shows how much power your scooter has, each bar represents 20%.
9. Headlight Indictator - Shows whether the headlight is on / o

18
Bluetooth Torch / Flashlight
This unit comes with a Bluetooth torch / ashlight that connects wirelessly to your
smart phone to play music, answer phone calls, charge your phone, and play the radio.
1) Press this to turn on / off the ashlight
2) Press this to change to the next song / station. Press and hold this to increase the
volume
3) Press this to change to the previous song / station. Press and hold this to decrease
the volume.
4) Press and hold to turn this off / on. Press it once to answer / hang up on phone calls
when a call is coming in. Press this once regularly to switch between bluetooth and
radio.
** NOTE ** To connect to the torch via bluetooth you must open the bluetooth settings
through your smart phone and connect to “BT SPEAKER”
To charge the torch pull at the silver portion of the torch and you will nd a USB port.
Plug the charger that comes with the Torch directly into here and the other end into a
PC or USB charging brick.
You can also use this charging port to charge your own personal device!

19
FOLDING THE Escooterinabox
Deluxe
Take the handlebar latch guard and push it to the side.
Pull the latch down and then take line up the top folding clip to the rear folding clip unl
it snaps into place.
To unfold it press down
on the top folding
clip and then li the
handlebar up. Then
complete the tasks
above in reverse unl
the unit is secure.

20
Maintenance and
Troubleshooting
This secon outlines problems you may have and soluons you may be able to use.
Many of the parts in this product are not user-serviceable and should be repaired by
trained professionals. This is especially true of the electrical systems and the mechanical
components. Alteraon of these components voids the warranty.
Tire Pressure
Maintain the air pressure in your res at the appropriate level. If the air pressure is too
low, your escooter’s performance will suer and it will become damaged more easily.
Cold weather and lower temperatures will cause the air pressure in your res to drop, and
warmer weather will cause it to increase, even if there are no leaks in the re tube. To
replace the air in your res, follow this procedure:
1. Idenfy the required pressure by examining the text along the side of the re rim.
This text should indicate the recommended pressure for your re.
2. Locate the air valve on the inner surface of the re rim.
3. Remove the valve cap and place in a secure locaon.
4. Place the nozzle end of an air pump (hand-power or mechanical) over the valve.
5. Pump up the air in the re, being careful not to let the pressure go above the level
prescribed on the side of the re wall.
6. Remove the pump nozzle from the air valve without allowing much air to escape
from the re.
7. Replace the valve cap on the air valve.
Maintaining the proper air pressure will allow you to travel much further on a single
charge, because the motor will not have to work as hard to move the escooter.