Digiplex DGP-641 Operating instructions

DGP-641 LCD Keypad V1.3
Programming Guide
PROGRAMMING METHOD
To view the keypad’s serial number, press and hold the [0] key,
then enter the [INSTALLERCODE]and enter [000]. We recommend
that you use this sheet to keep track of which sections were
programmed and how. This module can also be programmed using
the control panel’s Broadcast Programming Feature (see Digiplex
Installation & Reference Manual).
PROGRAMMING SECTIONS
In the following tables and sections, any value represented in bold
is the default setting. SECTION [006]
Confidential Mode Timer (005-255 seconds)
___/___/___ (default = 120)
SECTION [007]
PGM Timer (000-255 see option [3] in section [005])
___/___/___ (default = 005)
SECTION [008]
PGM Activation Event: PGM Table in Digiplex Programming Guide
___/___ [1 2 3 4 5 6 7 8] (default = 0 / 0 all off)
SECTION [009]
PGM Deactivation Event: PGM Table in Digiplex Programming Guide
___/___ [1 2 3 4 5 6 7 8] (default = 0 / 0 all off)
MESSAGEPROGRAMMING
Each section from [101] to [249] contains one message with a
maximum of 16 characters. For more details and to record any
changes, use the DGP-641 LCD Programming Guide.
Section [101] to [148] = Zone 01 to Zone 48 respectively
Section [149] to [244] = Code 01 to Code 96 respectively
Section [245] = Paradox Family
Section [246] to [249] = First, Second, Third, & Fourth Area
After entering the section corresponding to the desired message,
the message can be re-programmed to suit your installation needs
as detailed in Table 1. For example, section [101] “ZONE 01” can
be changed to “FRONT DOOR”.
STEP 1: Press and hold the [0] key
STEP 2: Enter the [INSTALLERCODE]
STEP 3: Enter section [953]
STEP 4: Enter the keypad’s 8-digit [SERIALNUMBER]
STEP 5: Enter the 3-digit [SECTION]you want to program
STEP 6: Enter the required data
SECTION [001]: Partitioning
Option OFF ON
[1] Partition 1 l Disabled l Enabled
[2] Partition 2 l Disabled l Enabled
[3] Partition 3 l Disabled l Enabled
[4] Partition 4 l Disabled l Enabled
[5] Not used l N/A l N/A
[6] Not used l N/A l N/A
[7] Not used l N/A l N/A
[8] Not used l N/A l N/A
SECTION [002]: General Options
Option OFF ON
[1] Display Code Entry l Disabled l Enabled
[2] Display Exit Delay l Disabled l Enabled
[3] Display Entry Delay l Disabled l N/A
[4] Confidential Mode l Disabled l Enabled
[5] To Exit Confidential Mode l Enter Code l Press Button
[6] Not used l N/A l N/A
[7] Not used l N/A l N/A
[8] Not used l N/A l N/A
SECTION [003]: General Options
Option OFF ON
[1] Muting l Disabled l Enabled
[2] Exit Delay Beep l Disabled l Enabled
[3] Not used l N/A l N/A
[4] Chimed Zone Closure l Disabled l Enabled
[5] Not used l N/A l N/A
[6] Not used l N/A l N/A
[7] Not used l N/A l N/A
[8] Not used l N/A l N/A
SECTION [004]: Beep on Trouble
Option OFF ON
[1] System & Clock Trouble Beep l Disabled l Enabled
[2] Communicator Trouble Beep l Disabled l Enabled
[3] Module & Bus Trouble Beep l Disabled l Enabled
[4] All Zone Trouble Beeps l Disabled l Enabled
[5] Not used l N/A l N/A
[6] Not used l N/A l N/A
[7] Not used l N/A l N/A
[8] Not used l N/A l N/A
SECTION [005]: PGM Options
Option OFF ON
[1] PGM State is Normally l Open l Closed
[2] PGM Timed Mode l Disabled l Enabled
[3] PGM Base Time l 1 Second l 1 Minute
[4] PGM Override l Disabled l Enabled
[5] Keypad Tamper l Disabled l Enabled
[6] Not used l N/A l N/A
[7] Not used l N/A l N/A
[8] Not used l N/A l N/A

Table 1: Message Programming
Key Function Details
[STAY]Insert Space Pressing the [ STAY ] key inserts a blank space in the current cursor position.
[FORCE]Delete Pressing the [FORCE] key will delete the character or blank space found at the current cursor position.
[ARM]Delete Until the End Pressing the [ ARM ] key will delete all characters and spaces to the right of the cursor and at the cursor's position.
[DISARM]Numeric/Alphanumeric Every time the [DISARM]key is pressed it will toggle numeric keys to alphanumeric keys and vice versa.
Numeric: Keys [0] to [9] represent numbers 0 to 9. Alphanumeric: refer to Table 2.
[BYP]Lower/Upper Case Every time the [BYP]key is pressed it will toggle the case setting from lower to upper case and vice versa.
[MEM]Special Characters After pressing the [MEM]key, the cursor will turn into a flashing black square. Using Table 3, enter the
3-digit number that represents the desired special character.
Table 2: Alphanumeric Keys
Key Press Key
Once Press Key Twice Press Key Three Times
[1] A B C
[2] DEF
[3] GHI
[4] JKL
[5] MNO
[6] PQR
[7] STU
[8] VWX
[9] YZ
Figure 1: DGP-641 LCD Keypad Installation Drawing
Table 3: Special Characters