Displays2go SMGEOSHNT1 User manual

Metal andMetal and
Wood GeoMetric ShelvinGWood GeoMetric ShelvinG
SKUs: SMGEOSHNT1SKUs: SMGEOSHNT1
Aemy InructionsAemy Inructions

PARTS DIAGRAM
If you have any questions regarding our products, please visit us at www.displays2go.com or
contact D2G customer service at 844-221-3388.

1. Slide (E) bracket onto the top of the first frame piece (A). Each side should have one bracket.
2. Repeat step 1 with frame piece (B), as depicted.
3. Screw top of frame (C) into the frame piece (A). Use two (M) screws per side.
4. Repeat step 3 with frame pieces (D) and (B), as shown.

5. Using the four connection pieces (G), slide frames together, as depicted.
6. At the corners, use (M) screw to tighten and secure unit together.
7. Insert shelving support rods (F) and secure to frame with two (M) screws per support rod. Follow
diagram to ensure correct placement.
8. With (N) screws, secure top and bottom panels to the unit. Six screws will be used on each side.
NOTE: For step 8, flip unit onto its side for easy access and to prevent damage to the unit.

9. Slide shelving pieces (O) into the unit, as
shown. Secure shelving to unit using four (N)
screws per shelf.
NOTE: These screws will be inserted at the
bottom of the shelf (SEE DIAGRAM).
Enjoy your new Geometric Shelving Unit!