Dorma TS93-5 PKT 90 User manual

POCKET WALL
SHOE
END BLOCK
TRACK SLIDE
DOOR DOOR
DOOR DOOR
TS93-5 PKT 90, 90/D, 90/F
(REFERENCE UNIT CARTON LABEL FOR ACCESSORIES AND OPTIONS SUPPLIED)
Determine hand of door and unit type supplied.
Prepare door and wall for fasteners
1
according to template 08279992.
2
3
4
LEFT HAND DOOR RIGHT HAND DOOR
Attach track to wall.
Insert slide shoe and end blocks into track. Attach track to QTY
(2) WOOD
SCREWS
METAL
SCREWS
wall.
INSPK NO. 08279990 Rev.05/08
POCKET DOOR TRACK (TRACK ON WALL)
POCKET
PIVOTS
1 of 3
INS NO. Rev.
08279991 05/08
PAGE
www.dorma-usa.com 1-800-523-8483
PIVOT
Attach mounting plate to door.
QTY
(4) WOOD
DOORS
METAL
DOORS
RIGHT HAND DOOR LEFT HAND DOOR
QTY
(4)
POCKET
WALL WALL
POCKET
SIDE
PIVOTS
POCKET
PIVOT
SIDE
POCKET
Attach closer to mounting plate. QTY
(4)
RIGHT HAND DOOR LEFT HAND DOOR
WALL
POCKET WALL

Attach arm to slide shoe.
screw and tighten securely. Install track cover.
Align hole in arm with slide shoe in track. Insert
(1)
M5 HEX KEY
(93T, 93TH)
QTY
POCKET WALL
Adjust sweep, latch and backcheck. 1 - SWEEP speed from
2 - LATCH speed from
3 - BACKCHECK cushion effect.
approx. 7° to 0°.
DECREASE
INCREASE SWEEP
BACKCHECK (INTENSITY)
RANGE
LATCH RANGE
CAUTION: DO NOT REMOVE VALVES.
INCREASE
DECREASE BACKCHECK
CAUTION: DO NOT CLOSE VALVE COMPLETELY. RANGE
123
08279991 2 of 3 05/08
INS NO. PAGE Rev.
QTY
(1)
RIGHT HAND DOOR LEFT HAND DOOR
C POCKET
PIVOTS
LPOCKET C
PIVOTS L
WRENCH WRENCH
With door closed place wrench on bottom pinion of closer. Rotate wrench slightly toward latch edge of door.
Attach main arm to top pinion of closer. Tighten securely with screw provided.
5
6
7
7Adjust spring tension to insure proper closing and latching of INCREASE
DECREASE
NOTE: Clockwise turns increase spring tension.
door.
DOOR WIDTH
INT.
3'6"
4' 04
5
FULL TURNS OF
SPRING ADJUSTER CLOSER SIZE
-4
TS93-5 6+5
4'6"
approx. 70° to 0°.
4 - DELAY speed from
approx. 180° to 70°.
4

screw.
Secure with locking
TAB
COVER
cover onto plate.
END COVERS
end caps.
Slide end covers over closer body
REMOVE
Remove tab that aligns with arm hub. Slide
Install cover.
8
08279991 3 of 3 05/08
INS NO. PAGE Rev.