
6
Surface Vertical Rod Exit Devices
S300
S460
Olympian 200 Series - Non Handed
Olympian FL200 Fire Exit Series - Non Handed
Doors – For all types of single and double door
applications. Available for 1-3/4”to 2-1/4”thick, up to
4’-0”wide by 10’-0”high openings. For thicker doors,
consult factory. Furnished standard for 1-3/4”thick, 3’-0”
wide by 7’-0”high openings.
Device – Covers ANSI A115.2 (Type 161), A115.18 cylinder
lock and A115.1 (Type 86) Mortise Lock preparation.
Functions – Functions are field selectable. The device is
furnished for a desired function if specified. If not specified
the“03”function is furnished standard.
Covers – Lock Stile and Hinge Stile Assembly, Cold drawn
Bronze, Brass, Stainless Steel.
Chassis – Lock Stile and Hinge Stile Assembly, Investment
Cast Steel, Zinc Dichromated.
Arms – Forged Brass or Bronze.
Crossbar – 1 Bronze, Brass or Stainless Steel tubing
furnished standard for a 3-0 Door. For wider doors, specify
door width. Knurled and Reinforced crossbars are available.
Vertical Rods – Brass, Bronze or Stainless Steel.
Top Latchbolt – Stainless Steel, Deadlocking, 3/4”throw.
Bottom Bolt – Steel plated, independent action 5/8”throw,
with adjustment range to suit 3/4 door undercut.
Top Strike – No. S300, Investment Cast Stainless Steel, Black
Powder Coated.
Bottom Strike – No. S460, Steel, Black Powder Coated, flush
mounted.
Crossbar Height – 34-5/8”to centerline from finish floor
standard. May be varied as situation dictates, consult
factory.
DEVICE OPTIONS
Suffix Description Page
CBK Knurled Crossbar................................................12
CBR Reinforced Crossbar .........................................12
LBR Less Bottom Rod................................................6
LD Less Dogging.......................................................12
SNB Sex Nut and Bolt.................................................3
SEC Security Screws...................................................3
TMB Transom Bracket.................................................12
To specify add Prefix to Device No. (e.g. 203LBR)
Dogging – Hex Key dogging standard for Panic Hardware. NOT
available on Fire Exit Hardware.
UL Listed – Panic and Fire Exit Hardware. For FIRE EXIT
HARDWARE Ratings see page 15. Conforms to UL10C and UBC
7-2.
ANSI/BHMA – Devices are BHMA certified for ANSI 156.3, Grade
1.
FINISHES –
• 605
• 606
• 612
• 613
• 625
• 630
For Finish description see page 3.
Cylinders – Rim Type, not furnished standard. Specify when
required. For cylinder details see page 13.
Stile Width – See Stile Information on page 14.
Less Bottom Rod (LBR) Option – Specify suffix“LBR”
(e.g. 208LBR). See UL FIRE LABEL RATING Chart on page 15. Fire
Rated Devices include FB277 Fire Bolt Assembly.
Olympian 100, 200, 300 Series Exit Devices