Doro TEL 8 PLUS User manual

doro tel 8 plus
Manual
   

English
2 www.doro.com
English
www.doro.com 3
Operation
Connection
1. Connect the curly cord to the handset and socket on the side of the side of
telephone.
2. Connect the telephone line cord to the socket at the rear of the telephone, and
then to a telephone network wall socket.
3. You will hear a click when the modular plug is correctly in place.
4. Lift the handset and listen for the dial tone. Your telephone is now operational.
Wall mounting
The telephone can be wall mounted using two screws horizontally mounted 79 mm
apart, the screws will then  t into the two ‘keyholes’ on the back of the telephone.
1. Fit two screws horizontally mounted 79 mm apart.
2. The screws should locate into the two keyholes on the back of the telephone.
3. Remove the hanging peg (located by the hook switch) by pushing it upwards.
4. Rotate the hanging peg 180 degrees, and then replace it.
Mute button
The handset microphone can be disabled during a call by pressing MUTE. Press
MUTE once more to reactivate the microphone.
Redial button
If the number dialled is engaged or if you wish to redial the last number dialled, lift
the handset and press the REDIAL button.
Recall
If the product is connected to a business PBX system, press the RECALL button
followed by the extension number to transfer a call.
When connected to a PBX system TIMED or EARTH recall can be selected using
the switch on the right of the unit, In normal use this switch does not require
adjustment.
Please contact your network operator for more services information.

English
2 www.doro.com
English
www.doro.com 3
Other
Ringer
1. Lift the handset (ignore the dialling tone) and press MUTE.
2. Press #.
3. Select a ringer from the table below using the number keys 0-9.
4. Press MUTE again and replace the handset. The ring signal is now set.
Key/setting Melody type Ringer level
1.......................................... Melody A........................ Low
2.......................................... Melody A........................ Normal
3.......................................... Melody A........................ High
4.......................................... Melody B........................ Low
5.......................................... Melody B........................ Normal
6 (factory setting)................ Melody B........................ High
7.......................................... Melody C ....................... Low
8.......................................... Melody C ....................... Normal
9.......................................... Melody C ....................... High
0.......................................... Off * ............................... -
* If the key 0 is selected, the ringer will be turned off until the next time the handset is lifted.
Once the handset is lifted the ringer will revert to the previous setting.
It is also possible to use the switch on the right hand side of telephone to select
either off, low or high positions.
Message Waiting Indicator
Some PBX systems offer a Message Waiting function.
At the rear of the telephone is a three position switch, this is used to select one of
the following options:
1: Voltage MW (neon indication)
2: Line reversal
3: Line reversal
By selecting the appropriate option for your system the telephone will indicate if
there are any voice mail messages available.
This function operates differently depending on the PBX system in question
therefore please contact your system administrator for more information.
If the unit is not connected through a PBX please select 1.

English
4 www.doro.com
Other
Troubleshooting
Test the equipment on a known working line (e. g. at a neighbour’s). If the
product works then the fault is with the line. If the telephone still does not
work, contact the place of purchase for service. Do not forget the receipt or a
copy of the invoice.
UK
If you cannot resolve the fault using the faultnder section, technical support is
available on the Premium Rate Number: 0906 302 0114.
Calls cost 50 pence per minute (prices correct at the time of going to press),
and is operational between 9AM - 5PM Monday-Friday excluding Bank
Holidays. Alternatively,
E-mail on: [e-mail]
You can contact us in writing: Consumer Support Group, Doro UK Ltd.,
22 Walkers Road, North Moons Moat, Redditch, Worcestershire, B98 9HE,
(regarding any Spares or Technical query), or
Telephoning (Spares only): 01527 584377
Web site: www.doro-uk.com
Guarantee
This product is guaranteed for a period of 12 months from the date of purchase.
Proof of purchase is required for any service or support required during the
guarantee period. This guarantee shall not apply to a fault caused by an accident
or a similar incident or damage, liquid ingress, negligence, abnormal usage or
any other circumstances on the purchaser’s part. Furthermore, this guarantee
shall not apply to a fault caused by a thunderstorm or any other voltage
uctuations.
This guarantee does not in any way affect your statutory rights. (As a matter of
precaution, we recommend disconnecting the telephone during a thunderstorm.)

English
4 www.doro.com

English
Version 1.0