Dräger X-zone 5500 User manual

Key functions of the X-zone
The following key functions refer to the X-zone keys.
Status LED overview
Battery LED
(Shows the battery status and the status of the external power supply.)
en Quick-reference guide - Dräger X-zone 5500/5800
NOTICE
Observe the Instructions for Use!
Any use of the X-zone 5500/5800 requires full understanding and strict observation of the Dräger X-zone 5500/
5800 Instructions for Use. This quick-reference guide is not intended to replace the Instructions for Use.
Action Meaning
Pressing key once Acknowledges device defects and pre-alarms.
Pressing and holding key for 3 sec Switch from OFF to STANDBY mode or switching from STANDBY to
ON mode.
Pressing and holding and key for 3 sec Switches to OFF mode.
Pressing key once On the main device: Expand group / End search run.
Pressing and holding key for 3 sec On the main device: Reduce group size.
On the group device: Deletes the grouping information.
Pressing key 3 times On the main device: Activate group monitoring.
Pressing key for 3 sec and key 3 times On the main device: Provisionally deactivate group monitoring.
Colour LED status Device mode Meaning
off off OFF mode Device is switched off.
red
on ON/STANDBY mode
Charge less than 33 %.
red/green Charge between 33 % and 66 %.
green Charge greater than 66 %.
red
ON/STANDBY mode
Battery pre-alarm
red Battery main alarm; X-zone switches off after
10 sec.
red OFF mode Attempt to switch on in OFF mode when the
battery is empty (10 sec. on).
red
ON/STANDBY mode
in charging cradle and
with external power
supply
X-zone is charging, charge less than 33 %.
red/green
X-zone is charging, charge between 33 % and
66 %.
green
X-zone is charging , charge greater than 66 %.
green X-zone is fully charged.
90 33 149 - SD 4638.500 en
© Dräger Safety AG & Co. KGaA
Dräger Safety AG & Co. KGaA - Revalstraße 1, 23560 Lübeck, Germany
Edition 07 - June 2020 (Edition 01 - October 2009)
Subject to alteration
www.draeger.com
i
i

Communications LED
(Indicates the connection status if several devices are coupled via wireless connection or communication cable.)
Pump LED
(Indicates the pump status.)
Grouping LED
(Indicates the grouping status.)
Colour LED status Group monitoring Meaning
green
on
off / device not grouped At least 1 other X-zone coupled via wireless
connection or cable detected.
activated
On the main device: device connected to group.
On the group device: device connected to main
device.
green provisionally deactivated X-zone connected to group.
red
on
off / device not grouped No additional X-zone coupled via wireless or cable
connection detected.
activated
Alarm on main device: At least one device in the
group is not connected.
Alarm on group device: No connection to main
device.
red
provisionally deactivated
On the main device: At least one device in the
group is not connected.
On the group device: No connection to main device.
Colour LED status Device mode Meaning
off off STANDBY mode Device is in STANDBY mode.
off
ON mode
No pump adapter detected.
red/
green
Flow test required.
red Flow test running.
green
on
Flow test successful/pump running.
red Flow error (e.g. due to lack of volume flow or no
flow test).
Colour LED status Device hierarchy Meaning
off off
X-zone 5500/5800
X-zone ungrouped
green X-zone ungrouped, can be added to a group.
red Several main devices found, X-zone cannot be
grouped.
green on
Group device
X-zone is grouped.
green X-zone can be removed from a group.
red/
green on
Main device
X-zone is a main device.
red/
green
Group of the main device can be extended.
red/
green
Group of the main device can be reduced.