Draper Tabletop Projection Screen MicroScreen User manual

Operating Instructions
MicroScreen Tabletop Projection Screen by Draper
Copyright © 2008 Draper Inc. Form MicroScreen_Inst08-R Made in China
If you encounter any difficulties installing or servicing your screen, call your
dealer or Draper, Inc., Spiceland, Ind., [phone], or fax [phone].
®
➀Open all four leg supports 90 degrees to casing. Leg supports snap into
correct position.
➁Place closed unit with carry handle on left side (from audience
perspective). Depress two buttons on front and back of housing (clearly
marked) with thumb and index finger. Open screen slowly to desired width.
➂Place on flat and stable table and position for data projection viewing.
➃To close, repeat step two. Casing will automatically snap closed. Take care
to close gently.
➄To close leg supports, squeeze legs together at base of housing. Fold up to
closed position. Legs will automatically snap into closed position.
➅Place unit into protective storage bag.
Note: Do not allow screen surface to be exposed to direct sunlight, as it could
fade matt white viewing surface. For presentation, place opened unit away
from door drafts and fan air movement.
Squeeze here
Dimensions
Diagonal Overall Image Closed Weight
(4:3 NTSC) Size (H x W) Area (H x W) Dimensions (D x H x W) (lbs)
40" 28
1
/ 8 " x 36
1
/ 2 " 24" x 32" 3" x 3½" x 28
1
/ 8 " 6
50" 34
1
/ 2 " x 44
5
/ 8 " 30" x 40" 3" x 3½" x 34½" 6
Note: Do not touch the screen surface. Handle the MicroScreen only by the
case sides or handle.
Caution: Take care not to pinch fingers between sides when closing.