DREAMS Detroit Bed User manual

Detroit Bed
Assembly Instructions
Need assistance?
Call: 0344 292 0000
Dimensions mm Length Width Height
SuperKing 2400 1970 1195
Approximate time to
assemble this product
Retain these instructions
for future reference
2 x people recommended to
assemble this product
Do not discard any of the
packaging until you have
checked that you have all the
parts and the pack of fixings.
You will require a cross
head screwdriver
Helpful advise before you begin:
1. We suggest you spend a short time reading through this leaflet
and then follow the simple step by step instructions.
2. If you follow the instructions carefully the end result should be
worth the effort.
3. Do not discard any of the packaging until you have checked that
you have all the parts and the pack of fittings.
4. Assemble this product on a carpet.
5. To ensure an easier assembly, we strongly advise that all fittings
are only finger tightened during initial assembly. Only upon
completion of the assembly should all fixing points be fully
tightened.
6. We recommend a periodic check on all fixing points to make
sure they remain fully tightened.
7. Keep glue and fittings out of children’s reach.
8. Do not use any other tools other than those recommended to
build this product.
9. Please do not use substitute parts. Use only additional or
replacement parts supplied by Dreams Ltd.
10. In the unlikely event that this product has missing or damaged
parts, please call 0344 292 0000 to obtain spares.
Page 1 of 9
4
3
King 2400 1670 1195
Double 2300 1520 1195

Page 2 of 9
Do not discard any of the
packaging until you have
checked that you have all the
parts and the pack of fixings.
Feet
Fittings Checklist
Parts Checklist
1/4 x 50mm Bolt
x 11
x 6
Ø8 x 35mm Bolt
Check size of fixings against this guage (dimensions in mm)
1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 10 0 11 0
x 4
D
A
B
Flat Washer
x 15
C
01 Head Board
Foot Board
Side Rail x2
02
03
Drawer Front
04
Drawer Side x2
05
Drawer Bottom
06
Bar x2
07
Drawer Front
08
Drawer Back
09
Bar x2
10
16mmL Screw
Center Leg
Cam Pin
x 8
E
50mmL Tapping Screw
x 1
J
x 1
H
x 12
I
Allen Key M5
1/4 x 20mm Nut
x 6
K
x 1
L
01
02
03
03
Allen Key M4
x 2
M
30mmL Screw
x 16
N
Cam Lock
x 8
F
Caster
x 6
G
04
05
05
06
07
10
09
08

Page 3 of 9
Bed Frame Assembly
1
2
x 1
Allen Key M5
L
x 4
Feet
D
x 8
Ø8 x 35mm Bolt
B
x4
x4
x4
D
Loosely insert bolts (B) into each side of headboard (1) and foot board (2).
Note: Do not tighten fully but leave 10mm protruding.
Attach the side rails to the headboard and footboard.
Make certain the bed is squared up, then tighten all bolts fully.
B
B
02
01
02
01
L

Page 4 of 9
Bed Frame Assembly
3
4
x 16
30mmL Screw
N
x 12
16mmL Screw
I
04
07
07
07
07
07
x8
x6
x 8
Cam Pin
E
x 8
Cam Lock
F
04
05
05
06
09
09
09
N
G
I
I
10
10
10
10
x2
x2
09
04
05
04
E
E
F
F
E
F
F
F
E

x 3
Flat Washer
C
04
08
x3
09
x 3
Ø8 x 35mm Bolt
B
Page 5 of 9
Bed Frame Assembly
5
C
B

Page 6 of 9
Turn tostep A,B & C
x1
Adjustable Foot
H
x1
11
Standard wooden slat system

Page 7 of 9
Standard Wooden Slats Assembly
A
x 2
1/4 x 50mm Bolt
x 4
Flat Washer x 2
1/4 x 20mm Nut
ACK
03
03
x2
A
M
M
K
C
C
11
11
B
H
J
Adjustable Foot
Fit the adjustable support wooden leg to the
centre slat (there is a pre-drilled hole on the
centre slat) as shown.
50mm Tapping
Screw
x 1 Center Leg x 1
JH

Page 8 of 9
C
x 4
1/4 x 50mm Bolt x 8
Flat Washer x 4
1/4 x 20mm Nut
ACK
03
03
x4
M
M
A
C
C
K
11
11
D

Page 9 of 9
Care of your Dreams Furniture
Your new bed from Dreams is more than a beautiful piece of
furniture. It’s an investment in your health and wellbeing. Care
for it well and you’ll enjoy a great night’s sleep for many years
to come.
Should you have any issues with your product please contact
our customer service team on 0344 292 0000
On Delivery
Once your new bed is in place and all the packaging is removed,
let it air for approximately 1 hour before putting on your mattress,
mattress protector and bed linen.
Don’t worry if your bed feels a little strange at first. It takes time
for your body to adjust to a new level of support and comfort. You’ll
soon be enjoying a more relaxed sleep.
Please consider the surface your bed will be stood on. If your bed
frame is to be stood on an uncarpeted surface please ensure that
you use rubber backed mat under the legs to avoid slipping.
Day to day Care
Please use only 5% soap, 95% water solution, wiping with a damp
cloth. Finally dry with a soft clean cloth. Dust with a soft clean cloth
only.
Check all bolts, screws and legs regularly to make sure they
haven’t loosened and tighten all joins of your furniture or bedstead
after 6 months. Please keep these instructions in a safe place for
further use.
Storage Drawers in Bedsteads are designed to carry lightweight
items such as Pillows, duvets and linen. Please try to avoid storing
heavier items such as books or toys.
Returns
If you have bought a large item such as a bed or mattress which
is damaged or faulty and would like to return it, we will be able
to arrive at your home and take your item away. All we ask is that
your item is in perfect condition and in its original packaging (you
can open the packaging to inspect your item). Items will not be
able to be returned if they are not in their original packaging.
For online and telesales orders, you can only return an item within
14 days from the date of your delivery.
Dreams reserve the right to modify products, dimensions, parts and fixings whithout notification.
www.dreams.co.uk
Thank you for purchasing from
Need assistance?
Call: 0344 292 0000