DREAMS Crystal Bed User manual

5HYLVLRQQXPEHU1


Crystal
Bed
Assembly Instructions
Component parts and fittings contained in the box
1. We suggest you spend a short time reading through this leaflet and
then follow the simple step by step instructions.
2. If you follow the instructions carefully the end result should be worth
the effort.
3. Do not discard any of the packaging until you have checked that
you
have all the parts and the pack of fittings.
4. Assemble this product on a carpet.
5. To ensure an easier assembly, we strongly advise that all fittings
are only finger tightened during initial assembly. Only upon
completion of the. Assembly should all fixing points be fully
tightened.
6. We recommend a periodic check on all fixing points to make sure
they remain fully tightened.
7. Keep glue and fiWWLQJVRXWRIFKLOGUHQ¶VUHDFK
In the unlikely event that this product has missing or damaged parts,
please call 08442 920000 to obtain spares
Before you
Start, here are
some helpful
advices.

5HYLVLRQQXPEHU2
PARTS Fittings

5HYLVLRQQXPEHU3




ġ
1)Use bolt (A), washer (D) and plastic
washer (E) to fix the side rail (3) onto
headboard (1) and footboard (2) by
using Allen Key (F).
 Attach the crystal finials (4) onto
headboard (1) and footboard (2) by
turning it clock-wise.
$66(0%/<

5HYLVLRQQXPEHU4





127(
: Slats not supplied shown for
reference only.
Both slats on "step 2" and "step 3" can
be assembled to the bedstead. you can
make
a choice between the two slats.
OPTION"A": DREAMS FIXED WOOD
SLATS
1)Carefully locate the slats onto the unit.
2)Use bolt (B) and JCN nut (C) to fix the
unit using Allen Key (F)

L
$66(0%/<

5HYLVLRQQXPEHU5

ġ
OPTION"B": DREAMS SPRUNG SLATS
1)Use the bolt to fix support leg onto the
slat frame. Please note that these bolts
are to be found inside the slat frame box.
2)Carefully locate the slats onto the unit.
3)Use bolt (B) and JCN nut (C) to fix the
unit using Allen Key (F).

$66(0%/<