DURAVIT Architec 700353 90 Series User manual

Installation instructions Bathtub with integrated tile flange
Notice de montage Baignoire avec bride de carrelage intégrée
Instrucciones de montaje y uso Bañera con cinta selladora para juntas de azulejos
Architec
#  .. . .. ..
#  .. . .. ..
#  .. . .. ..
#  .. . .. ..
#  .. . .. ..
#  .. . .. ..
#  .. . .. ..
#  .. . .. ..
#  .. . .. ..
#  .. . .. ..
#  .. . .. ..
#  .. . .. ..
#  .. . .. ..
#  .. . .. ..
#  .. . .. ..
#  .. . .. ..
D-Code
#  .. . .. ..
#  .. . .. ..

257221_MAL_Bathtub_Tile flange_US/20.01.2

57221_MAL_Bathtub_Tile flange_US/20.01.2 3
es fr
Información importante 16
Montaje 17
Remarques importantes 10
Montage 11
Important information 4
Installation 5
en

Prior to the installation
Please read the specification sheets prior to the installation.
Specification sheets are available for download at
www.pro.duravit.us.
Products are in compliance with the following codes:
• Uniform Plumbing Code (UPC®)
• National Plumbing Code of Canada
Products are in compliance with the following standards:
• CSA B45.5-17/IAPMO Z124-2017
25
26
About these instructions
The installation instructions come as part of the Duravit
product and must be read carefully prior to installation.
Target readership and qualifications
This is a professional grade product. A working knowledge
of construction techniques and code compliant plumbing
installation are required for proper installation and user
satisfaction. We recommend the product be installed by a
licensed plumber.
Explanation of the key words and symbols
WARNING
Indicates a hazardous
situation which, if not
avoided, could result in
death or serious injury.
NOTICE Is used to address
practices not related to
physical injury.
Inspection (e.g. for scratches)
Inspect for leaks and that all connections have a
watertight seal
Indication of the length of time (e.g. 10 minutes)
>Action required
Safety instructions
Product and / or property damage
The breach of local and country-specific regulations and
standards can cause damage to the product and / or property
damage.
> Observe the local installation regulations and any
country-specific standards at all times.
457221_MAL_Bathtub_Tile flange_US/20.01.2
en

57221_MAL_Bathtub_Tile flange_US/20.01.2 5
en
Delivery contents
Architec
#  .. . .. .., #  .. . .. ..
#  .. . .. .., #  .. . .. ..
#  .. . .. .., #  .. . .. ..
#  .. . .. .., #  .. . .. ..
#  .. . .. .., #  .. . .. ..
#  .. . .. .., #  .. . .. ..
#  .. . .. .., #  .. . .. ..
#  .. . .. .., #  .. . .. ..
D-Code
#  .. . .. ..
#  .. . .. ..

657221_MAL_Bathtub_Tile flange_US/20.01.2
en
+Optional accesories (not included)
# 791224
# 790252 # 791255

~600 mm
~24"
>> For Architec bathtubs:
> Level feet before setting the
bathtub.
> Place cardboard / blanket on the
floor.
> Turn bathtub over.
> Inspect bathtub for any potential
damage that may have occured
during transport.
> Do not install if any damage is
visable.
For D-Code bathtubs:
> Position support frame.
For D-Code bathtubs:
> Attach feet to support frame.
For D-Code bathtubs:
> Assemble support frame.
57221_MAL_Bathtub_Tile flange_US/20.01.2 7
en
789
10 11 12654
321

5 ⅛" - 7 ⅞"
130 - 200 mm
>>
>
For D-Code bathtubs:
> Tighten the lock-nut to secure feet.
> Make sure the bathtub is level.
> Adjust feet if necessary.
> Set bathtub into designated frame
area.
> Connect waste and overflow
(not included).
For D-Code bathtubs:
> Level feet before setting the
bathtub.
For D-Code bathtubs:
> Use provided screws and washers
secure support frame into the
acrylic and plywood base.
NOTICE
Do not use screws other than what is
provided.
857221_MAL_Bathtub_Tile flange_US/20.01.2
en
123
456121110
987

6x
NOTICE
Apply silicone recommended for acrylic
bathtubs only.
> Fill the bathtub with water.
> Apply silicone as needed.
> Let it sit for 24 h before draining.
> Finish wall and tiles.
> Make sure to install water-resistant
wallboard.
> Fill the bathtub with water.
> Inspect for potential leaks.
> Clean the bathtub.> Connect waste and overflow to the
drain system.
WARNING
Fatal injury by electric shock!
Contact with electrical wiring can lead
to electrical shock.
> Make sure that there are no
electrical wires or heating running
under wall or floor which could be
affected by the installation.
> Affix 6 flange clips to the wall frame
for side support of the bathtub.
57221_MAL_Bathtub_Tile flange_US/20.01.2 9
en
181716
151413

Avant l’installation
Veuillez lire les fiches de spécifications avant l’installation. Les
fiches de spécifications peuvent être téléchargées sur
www.pro.duravit.us.
Les produits sont conformes aux codes suivants:
• Uniform Plumbing Code (UPC®)
• Code national de la plomberie du Canada
Les produits sont conformes aux normes suivantes:
• CSA B45.5-17/IAPMO Z124-2017
25
26
À propos de ces instructions
Ces instructions d’installation font partie du produit Duravit et
doivent être lues soigneusement avant l’installation.
Lectorat ciblé et compétences
Il s’agit ici d’un produit de niveau professionnel. Des
connaissances pratiques des techniques de construction et des
installations de plomberie conformes au code sont requises pour
assurer une installation correcte et la satisfaction du client. Nous
recommandons de faire réaliser l’installation du produit par un
plombier autorisé.
Explication des mots-clés et des symboles
AVERTISSEMENT Indique une situation
dangereuse qui, si elle
n'est pas évitée, entraînera
la mort ou des blessures
importantes.
ATTENTION S'utilise pour répondre à
des pratiques qui ne sont
pas reliées aux blessures
physiques.
Inspection (par ex. des rayures)
Vérifiez la présence de fuites et si toutes les connexions
sont étanches à l’eau
Indication de la durée (par ex. 10 minutes)
> Action requise
Instructions sur la sécurité
Endommagement d'un produit et/ou d'une propriété
Le non-respect des règlements locaux ou spécifiques à un pays
peut entraîner des dommages sur le produit et/ou des dommages
matériels.
> Observez les règlements d'installation locaux et les normes
nationales particulières en tout temps.
10 57221_MAL_Bathtub_Tile flange_US/20.01.2
fr