EAST COAST Nebraska User guide

Nebraska
Toddler Bed
Assembly and care
instructions

IMPORTANT!
READ CAREFULLY AND KEEP FOR
FUTURE REFERENCE
Thank you for purchasing an East Coast product. It’s been carefully designed and constructed to oer
quality, safety and reliability for you and your baby.
If you have a query about this product or require replacement parts, please contact 01692 408802.
Your child’s safety is your responsibility. Keep children clear during assembly as the fittings pack contains
small parts which may present a choking hazard. Please read the instructions and warnings carefully before
use.
Lay out the parts on a soft level surface and compare to the parts checklist. Don’t throw away any
packaging until you’re sure that you have all the parts.
You will need the following tools to complete assembly: Flat-headed screwdriver and cross-point
screwdriver
1
Hardware
A x 4 C x 8B x 4 D x 8 Hexagon Key
Wooden Parts
Side x 2
End x 2
Mattress Base

2
Assembly 1
Assembly 2
Sides
A x 2
End
Mattress Base
D x 8
End
B x 4
C x 2
Repeat for
other end.
Repeat for
other ends.
Note: Ensure
slats are in-line
with the end of
batten.

East Coast Nursery Ltd, Robertson House
North Walsham, Norfolk, NR28 0BX, UK
For customer care or enquiries:
Call: [phone]
Email: [e-mail]
eastcoastnursery.co.uk EC_NBTB_210619
Care and maintenance
All assembly fittings should be tightened properly and should be checked regularly and re-tightened as
necessary. Take care when moving the furniture, as careless handling may cause damage.
Cleaning is simple; just wipe over with a damp cloth, and avoid using strong detergents or abrasives.
An occasional light application of a wax polish will help maintain the finish.
In use
WARNING: YOUR CHILDREN’S SAFETY IS YOUR RESPONSIBILITY
Children are likely to play, bounce, jump and climb on beds, therefore the child’s bed should not be
placed too close to other furniture or windows, blind cords, curtain pulls or other strings or cords. It
should either be placed tightly against any wall or have a gap of 300mm between the wall and the side
of the bed.
This child’s bed is to be used with a 1400mm x 700mm mattress.
This bed is suitable for a child from 18 months until 4 years old.
Warning: Do not use the bed if any part is broken, torn or missing and use only spare parts approved by
the manufacturer.
Warning: Be aware of the risk of open fires and other sources of strong heat, such as electric bar fires,
gas fires, etc. near the vicinity of the bed.
Warning: Do not place the child’s bed near heat sources, windows or other furniture.
This product can be dismantled carefully for storage and transportation, but once the base has been
assembled this should not be taken apart.
This product has been designed and manufactured to: BS 8509: 2008 +A1: 2011.