Elmi DOS-10L User manual

Orbital
Rotation
Rocking
Platform
Reciprocal
Wave
Autorev-
erse
Rotation
Vibration Incubation
USER MANUAL
elminorthamerica.com
Digital Orbital Shaker DOS-10L / DOS-20L

USER MANUAL
Digital Orbital Shaker DOS-10L / DOS-20L
2
Content
Introduction .................................3
Technical specication ........................3
Delivery Package .............................3
General safety................................4
Electrical safety...............................4
During operation .............................4
Biological safety ..............................4
Preparation for use ...........................4
Control panel ................................6
Control keys .................................6
Main menu ..................................7
Choosing the working mode ...................7
Adjusting the parameters of the mode ..........7
Orbital rotation mode .........................8
Auto reverse mode ...........................8
Reciprocal mode .............................8
Vibration mode...............................8
Programming menu ..........................9
Creating program.............................9
Example of custom program ..................10
Simplied menu.............................10
Interface adjustment menu ...................10
Disinfection and cleaning .....................11
Transportation and storage ...................11
Warranty statements.........................11
Certicate of approval........................12

3
USER MANUAL
Digital Orbital Shaker DOS-10L / DOS-20L
Dear user!
Congratulations, you have acquired an ELMI shaker
- product of advanced technology and high quality!
DOS-10L shaker is easy to use and reliable in oper-
ation. We ask you to carefully read the user man-
ual and observe all maintenance and operation
requirements, as this will ensure long and awless
use of the device.
The shaker is designed to mix up components in
dierent kind of test tubes, at bottom laboratory
dishes , asks, Petri dishes, etc.
Technical specication
Size of working platform, mm .............................................................415х295
Speed of rotation, RPM.....................................................................20-500
Amplitude of platform movement, mm.......................................................... 20
Maximum load, kg ..............................................................................7
Working modes ................................................................................4
Type of platform movement ................................................................orbital
Timer ...............................................................1minute – 9 hours 59 minutes
Environmental temperature, °C ....................................................... +4 up to +45
Relative moisture of atmosphere ( at 20°C temperature). . . . . . . . . . . . . . . . . . . . . . . . . . . . not more than 80 %
Voltage and frequency .........................................................110-220 V, 50-60 Hz
Power supply adapter: ................................................................ 24VDC – 1A
Maximal power consumption, W ............................................................... 24
Size of the device, mm ...............................................................415х365x100
Net weight, Kg................................................................................8,5
Delivery Package
Item Quantity
Shaker ........................................................................................1
Power supply adapter...........................................................................1
Magnetic clips..................................................................................8
User manual ...................................................................................1
Packaging .....................................................................................1

USER MANUAL
Digital Orbital Shaker DOS-10L / DOS-20L
4
General safety
•Use only as directed in the operating instruc-
tions provided.
•The unit should not be used if it has encoun-
tered a physical shock or has been dropped.
•The unit must be stored and transported in a
horizontal position (see package label).
•After transport or storage allow the unit to dry
out (2-3 hrs) before connecting to mains power.
Use only original accessories provided by the
manufacturer and ordered
•specically for this model.
Electrical safety
•Connect to the mains only with a voltage cor-
responding to that on the serial number label.
Ensure that the switch and plug are easily ac-
cessible during use.
•Do not plug the unit into the main outlet with-
out grounding, and do not use extension lead
without grounding.
•Before moving the unit, disconnect it from the
mains. To turn o the unit, disconnect the pow-
er plug from the mains outlet.
•It is the user’s responsibility to carry out appro-
priate decontamination if hazardous material is
spilt on or inside the equipment. If liquid is split
inside the unit, disconnect it from the mains
and have it checked by a competent person.
During operation
•Do not block the platform movement.
•Do not leave the operating unit unattended.
•Do not operate the unit in environments with
aggressive or explosive chemical mixtures.
•Do not operate the unit if it is faulty or been in-
correctly installed.
•For indoor use only.
•Before using any cleaning or decontamination
method except those recommended by the
manufacturer, check with the manufacturer
that the proposed method will not damage the
equipment.
•Do not make modications to the unit.
Biological safety
•It is the user’s responsibility to carry out appro-
priate decontamination if hazardous material is
spilt on or inside the equipment.
Preparation for use
•Unpack the device. Please keep the packaging
material for trasportation or storage purposes.
•If the machine was stored at a temperature be-
low 0°C , make sure that it is kept at room
•temperature for at least two hours before turn-
ing it on.
•Place the shaker onto a level, horizontal surface.
•Examine the power adapter and appearance of
device for damadge.
•Connect the power cord to the centrifuge, insert
the adapter in to the socket and press network
•switch at ( I ) symbol. Display will light up on the
control panel.
•Check the platform. Try rotating it by hand.
There should be no noise or obstacles to
smooth
•running.
•Check the surrounding of device. Safety dis-
tance of 30cm must be observed around the
device during operation.
•Check for other signs of damage or malfunc-
tion.
ATTENTION! If there is any apparent damage or malfunction, DO NOT TURN ON the shaker without consulting a
specialist.

5
USER MANUAL
Digital Orbital Shaker DOS-10L / DOS-20L
Working platform
Casing
Network switch Power plug
Control panel

USER MANUAL
Digital Orbital Shaker DOS-10L / DOS-20L
6
Up and down
navigation keys
Entering and exiting key in
programming mode to set
the step parameter.
Setting key to
manage the
interface of device.
Left, right navigation keys
and increasing, decreasing
parameter value keys.
Start stop key. Entering and exiting key to
programming mode.
Control panel
Control keys
ORBITAL SHAKER
DOS-20L

7
USER MANUAL
Digital Orbital Shaker DOS-10L / DOS-20L
Main menu
In the main menu you can choose and set the needed working mode.
Choosing the working mode
The shaker has 4 working modes:
1. Orbital rotation
2. Auto reverse
3. Reciprocal
4. Vibration
To choose a mode go to the lowest level of the
main menu and select the desired mode using the
right or left navigation keys.
Adjusting the parameters of the mode
Using the navigation keys, select the desired mode
and set required values for each parameter.
Press and hold the left or right navigation key to
quickly change the value of a parameter.

USER MANUAL
Digital Orbital Shaker DOS-10L / DOS-20L
8
Orbital rotation mode
Orbital rotation - clockwise classic platform motion
mode with adjustable speed and time parameters.
Mode parameters:
•TIMER: 1 minute - 99:59 minutes - continuous
mode.
•PRM: 15 - 500.
Auto reverse mode
Auto reverse mode - platform orbital motion mode
with set and equal numbers of clockwise and coun-
ter-clockwise turns.
Adjustable RPM, time and the number of one way
rotations.
Options:
•TIMER: 1 minute - 99.59 minutes - continuous
mode.
•PRM: 15 RPM - 500 RPM.
•TURNS: 5 - 25.
Reciprocal mode
Reciprocal mode - provides changing direction mo-
tion with the choice of rotation angle of the plat-
form, at a predetermined RPM and operating time.
Options:
•TIMER: 1 minute - 99.59 minutes - continuos
mode.
•RPM: 07 - 20.
•Angle: 10 ° - 360 °
Vibration mode
Vibration mode - reciprocating type of movement
of the platform imitating shake.
Ability to customize the speed settings, time and
amplitude of the shake-up.
Options:
•TIMER: 1 minute - 99.59 minutes - continuos
mode.
•PRM: 07 - 20.
•Amplitude: 1mm - 2mm

9
USER MANUAL
Digital Orbital Shaker DOS-10L / DOS-20L
Programming menu
You can create a custom program using the pro-
gramming menu. Create multiple steps to combine
the various shaker working modes.
To enter and exit the programming menu use the
“PROGRAM” key.
Creating program
You can set the number of repeat cycles on the
bottom line of the programming menu. Ranges
are from 1 to 99, or continuos mode can be used.
Create a custom cycle program by adding four
steps and a number of program repeat cycles as
required.
All settings are made using the navigation keys. En-
ter and exit the programming menu using “ENTER”
key.
When setting the programming, you can assign the
desired operating mode:
The number of repeat cycles can be set in the bot-
tom line of programming main menu, ranges are
from 1 to 99, plus continuos mode.
PROGRAM STEP
WORKING MODE TYPE INDICATOR
NUMBER OF CYCLES
TOTAL PROGRAM TIME
1. Orbital rotation mode
2. Auto reverse mode
3. Reciprocal mode
4. Vibration mode
5. Pause
6. Disable step

USER MANUAL
Digital Orbital Shaker DOS-10L / DOS-20L
10
Example of custom program
Enter the Cycle programming menu
1 Select the 1st step and press “ENTER” key.
1.1 Go to the step menu’s bottom line, select or-
bital rotation mode; set the time for 5 minutes,
RPM to 100 and press “ENTER”.
2 Select the 2nd step and press “ENTER” key.
2.1 Go to the step menu’s bottom line and select
the pause mode; set the time to 1 minute and
press “ENTER” key.
3 Select the 3rd step and press “ENTER” key.
3.1 Go to the step menu’s bottom line and select
orbital rotation mode; set the time to 2 min-
utes, RPM to 200, and press “ENTER”.
4 Select the 4th step and press “ENTER” key.
4.1 Go to the step menu’s bottom line and select
the “NO OPERATION” mode and press “ENTER”.
5 Go to the program menu bottom line and set
the cycle value to 1.
The program is ready! Press start button to run
the program.
Simplied menu
If you wish to use the device just as an orbital
shaker and other modes are not needed, you can
enable the simplied menu by holding the “PRO-
GRAM” key and switching the network switch o
and on again.
To return to the advanced menu, repeat the
operation.
Interface adjustment menu
In the interface menu you can adjust the display
brightness, sound volume, and select the interface
language.
All settings are made using the navigation keys. To
enter and exit the menu use the “SETTINGS” key.

11
USER MANUAL
Digital Orbital Shaker DOS-10L / DOS-20L
Disinfection and cleaning
Shaker and accessories must be cleaned once a
week to avoid corrosion and changes to material.
Disconnect the device from mains power supply
and clean it separately. The platform, accessories
and exterior of the shaker should be cleaned with a
moist cloth. Only use neutral agents to clean these
parts. To disinfect, use an alcohol-based disinfect-
ant
(70% isopropanol/water mixture). If corrosive, tox-
ic or radioactive liquids or pathogenic bacteria are
spilled on the platform, shaker must be decontami-
nated thoroughly.
Transportation and storage
To ensure safety during transportation, the equip-
ment should be packed in the original manufactur-
er’s packaging or similar packaging substitute.
Equipment can be transported in any kind of closed
transport; make sure that equipment is tightly xed
and transported accordingly to transportation reg-
ulations. Equipment should be stored in original
manufacturers packaging in dry room with humid-
ity not more then 80% and temperature range of
+10°C up to +40°C. It is not recommended to store
the equipment more then 36 month.
Warranty statements
•Warranty applies to 24 month period from the
date of purchasing.
•Malfunctions that occur due to a fault of the
manufacturer, during warranty period, are re-
paired free of charge.
•Warranty is is not valid in the following cases:
- If the serial number label of the manufac-
turer is damaged.
- If damage occurs as a result of incorrect
operation, transportation or storage.
•These documents are necessary if applying for
warranty repair:
- User manual with serial number of the ma-
chine.
 - Ocially signed report, describing the rea-
sons and circumstances of the equipment
malfunctions.
•Warranty repair can be performed only if the
equipment is delivered in the original manufac-
turers packaging or equally safe packaging.
•Before returning for warranty repair ensure
that the device is fully cleaned, decontaminated
and does not present any kind of helth risk to
our sta.
•If the above warranty requirements are not met,
repair charges are applied to the customer.
•For all further questions concerning usage and
maintenance, please contact the manufacturer
or product vendor.

USER MANUAL
Digital Orbital Shaker DOS-10L / DOS-20L
12
Certicate of approval
Digital Orbital Shaker DOS-__0L
N0 __________________________________________
has been inspected for the technical conditions
and meets all regulations necessary for this class of
device.
Quality control person _____________________________
(name) (signature)
Date of manufacture ______________________________
PLACE FOR STAMP
Certicate of sale Organization_____________________
Address 1 line _____________________________________
Address 2 line _____________________________________
Phone _____________________________________________
Vendor ________________________ (name) (signature).
Date of sale ________________________________________
Phone:
[phone]
3483 Old Conejo Rd., STE 206
Newbury Park, CA 91320
[email protected]
elminorthamerica.com
North America
Phone:
(371) 6755-8743
21-133 Aizkraukles Str., Riga LV-1006
Fax: [phone]
E-mail: [email protected]
www.elmi-tech.com
Europe
© ELMI North America, Inc. 2021