Argos Amy white bunk Trundle User manual

Amy white bunk Trundle - 190x90 cm
Dimensions
Length - 186cm
Depth - 93cm
Height - 12cm
Weight - 11kg
Issue 1 - 15/05/14
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
0045 7668 8055 or e-mail: order@flexa.dk
Assembly Instructions - Please keep for future reference 1876965

1
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could
damage the unit. Only use hand
screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance

Components - Parts
Please check you have all the parts listed below
2
Slat x3 (90.0x6.5x1.5cm)
1
Drawer front x1 (185.6x8.9x2.0cm)
4
Slat x13 (89.7x6.5x1.5cm)
2
Drawer back x1 (184.0x6.5x2.0cm)
3
If you have damaged or missing components,
call the Customer Helpline: 0045 7668 8055
No. 12-01509001 No. 12-01508971
No. 12-02018401
No. 1331-18561-20

3
Please check you have all the fittings listed below
Ø26mm Castor white wheel x5
Tools required
A
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
B
3,5x12mm Chipboard screw x10
C
Components - Fittings
Phillips
screwdriver
(medium)
Ruler/tape
measure
3,5x30mm Chipboard screw x41
No. 3902-35012
No. 3901-35030
No. 4003-002

4
Assembly Instructions
Step 1
Attach the slats 1to the
drawer back 3and to
the drawer front 4with
screws B.
Please make sure that
all are in right angle (90
degrees) before you
continue!
920 mm
5 mm
40 mm
40 mm
upside down
upside down
upside down
Please make sure that
all are in right angle
(90 degrees)
before you continue!
upside
B
B
BB
1 1 1
3
4
1
34
B
B
B
B
B
B
B
B
B
B
B
B

Assembly Instructions
Step 2
Attach the slats 2to
the drawer front 4 and
the drawer back 3with
screws B.
5
upside
83 mm
2
1
B
BB
3
2
3
4
4
B
B

6
Assembly Instructions
Step 3
Attach the castor wheels
Ato the slats 1with
the screws C.
Assembly is complete.
If you need help or have damaged or missing parts,
call the Customer Helpline: 0045 7668 8055
E-mail: order@flexa.dk
50 mm
Ref.no. 44-00029-20 A Stand: 150514 Page 7 (82-20001-20)
C
C
C
C
A
C
C
2
1
3
2
1
4
3
2
1
3
2
1
4
A A
1
40 mm
upside down