Entes DTR-10t User manual

MENUS :
As above example, relay will switch on at 18:00 PM for all weekdays via
time function
Sunset settings are similar with sunrise settings
As above example, C1 relay will switch on 2 hours 30 minutes before the
sunrise time for all weekdays
1.5.3) ( ) In this menu, sunset function is selected
As above example, C1 relay will switch off 1 hour 50 minutes before the
sunset time for all weekdays
NOTE : Device calculates the sunrise and sunset times automatically
according to the summer/winter time and coordinate information which
are set by user
Go to previous menu
Go to next menu
Scrolling between menus or decrease related value
Relay position is change manually if press for 3 sec in
start menu
Scrolling between menus or increase related value
ESC button
SET button
DOWN button
UP button
:
:
:
:
DTR-10t, which has a real time clock, is an electronic timer that calculate
the sunset and sunrise periods automatically It designed for controlling
the devices which are connected to its contacts according to sunset,
sunrise and the time periods which are proggrammed by the user
1 ) PROGRAM ( ) :
In this menu, program settings can be done Only one fun tion ON or
OFF an be assigned to ea h program. Only one of TIME, SUNRISE
or SUNSET fun tions an be sele ted (assigned) for this fun tion. The
day and/or days of a tive an be sele ted separately for this program.
2 different program assigned in order to make eaiser the using of device
by switch it ON at sunset time and switch OFF at sunrise time These
programs which are assigned as default, can be deleted or changed by
the user
Related steps are mentioned as below:
If 0:00 is set, relay will be controlled at sunrise time By this
feature, devices which are connected to the relays, can be
controlled after or before the sunrise time
Relay can be controlled before or after the sunrise time according to the
entered time information This value can be set as hour or minute
(Max: +9:59, Min: -9:59)
1.5.2) ( ) In this menu, sunrise function is enabled however
sunrise time is not set
The output loads onne ted to the C1 relay do not fun tion if
auxiliary supply is off. Even relay status an be mentioned as on
( ), but auxiliary supply is a must for the fun tionality.
If the auxiliary supply does not exist, device passes to sleep mode
and display disappears However, real time clock and related functions
continue to operate If 4 buttons are pressed at the same time, main menu
displays and so user can see or change all settings
1.1) Program sele tion ( ) : Device has 15 different
programs User can assign 1 function to any program between P01-P15
Relay can be selected via one program and also relay can only be set as
switch on or switch off
For instance; If the status of C1 relay is set as ON (switch on), 1 program
is used
In order to switch off the relay which was set as ON before, another
program must be used (Such as 2nd program)
Star sign which exists after the program number ( ) represents
that the program is assigned
1.5.1) ( ) Selected relay can be switched on/off at defined
time period
1
Safety Pre autions
If below precautions are not properly observed and carried out, it can
cause to physical accident or damage to the device and installation
Disconnect power before working on the device
When device is connected to the network, do not remove the front panel
Do not clean the device with solvent or similar items Only clean with
dried cloth
Verify correct terminal connections before operate the device
Connect the device to the electrical panel
Electrical equipment should be serviced only by your competent seller
No responsibility is assured by the manufa turer or any of its
subsidiaries for any onsequen es rising out of the use of this
material.
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
MO WE FR SA SUTHTU
ESC SET
Day
1.2) Enter / Delete settings ( / ) : is used to set
a new program or to change the existing program
  is used to delete the existing program
1.3) Shows that C1 relay assigned to which program
The relay, which is switched on via any program, can not be switched off
by deleting the related program We can switch off the relay in two ways:
a) Switch off (OFF) the relay manually (Check the LOCK section)
b) Enter the switch off time (OFF) for any relay Delete the program after
the relay switched it off (OFF)
1.5) Fun tion sele tion ( / / ) : Function
selection is done in this menu 1 function can be selected for each program
3 functions exist: Time, sunset and sunrise
1.4) ON/OFF sele tion ( / ) : In this menu, it is selected
that whether selected C1 relay will switch on or switch off
C1
C1
When programmed in program menu, C1 relay is
programmed as ON Relay contact position looks like on the figure
at left side Relay contacts seem at monitor as
When programmed in program menu, C1 relay is
programmed as ON Relay contact position looks like on the
figure at left side Relay contacts seem at monitor as
ASTRONOMIC RELAY (DTR-10t)
CR-2032 reserve battery should only be changed by authorized service
For long time reserve, battery CR-2032 is used The shelf life of this
battery is 5 years, if the device is continously voltage supplied If the
device is not continously voltage supplied and waited in the shelf, the life
of the battery is 2-3 years (changes according to humidity of the shelf)
There are two reserves in the device Programmed data is protected
by these reserve against power failure
If power fails for 6-10 hours, programmed data is protected by super
capacitor and device continues to its operation During this time battery
(CR2032) is not used; so battery life extends
For short time, super capacitor is used:
MANUEL USE :
To use C1 relay, display must be in start menu Whether LOCK mod (Ref
LOCK menu) is selected or not, if pressed Down ( ) button for 3 sec ; at
the end of 3 sec ; if relay is on, it will be off and if relay is off, it will be on
SET SET SET SET
SET
ESC SETSET
SET
ESC
SET
SET SET SET
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
SET SET
SET
ESC SETSET
SET
ESC
SETSET
SET
SET
SET
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
SET SET
SET
ESC SETSET
SET
ESC
SETSET
SET
SET
SET
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
Date
Time
Relay on/off situation
Lock Mode
ESC button
SET button
UP button
DOWN button
It represents the time
interval which relay will
switch ON

Geographical location, which device will be used in, can be set in this
menu
For related settings, please refer to Table-1
If some missing or inaccurate data is entered, wrong sunrise and sunset
times are calculated
Time zone ( ), latitude ( ) and longitude ( ) submenus
exist in this menu
2 ) SWITCH ON & OFF NUMBER of RELAYS ( ) :
In this menu, switch on&off numbers are displayed for C1 relay Device
counts once for switching on and once for switching off
Count number of C1 can be reset
by selecting DELETE option
DISPLAYS :
Settings, which are done in the 'menus' section, can be observed in this
section It is not possible to set any parameter in this section
On the main menu, dashes, which exist near the
numbers between '00-24', represent total working
time of C1 relay
Displays can be observed by pressing ESC button
4 ) REAL TIME SETTING ( ) :
Real time and date settings are done in this menu Year, month, day, hour
and minute can be set respectively
5 ) GEOGRAPHICAL LOCATION SETTING ( ) :
3 ) LOCK (MANUAL CONTROL) MODE ( ) :
Time difference (UTC/GMT) according to the Greenwich, London
is set This value is '02' for Turkey Negative time differences
must be subtracted from '24' For example, time difference for
Mexico City is '-6' hours and so value must be set as
'18' (24-6=18)
A lock sign ( ) displays near the relay which is locked
6 ) SUMMER / WINTER TIME SETTING ( ) :
In this menu, summer/winter time settings are done
6.1) If Auto ( ) menu is selected, last sunday of March 02 00 AM
and last Sunday of October 03 00 AM are loaded For Turkey and Europe,
automic mode is in use
6.2) Date and hour also can be set by user manually via manual
( ) menu
First, month, day, hour and minute is set for summer tariff ( ) and then
same settings are done for winter tariff ( )
2
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
Latitude value is set in this menu North ( )/South ( ) hemisphere
is selected and related degree value is set
(For example, Istanbul, North ( ) 41° This display represents working time (cronogram) of
C1 relay and also working time internal which relay
will operate As this example, C1 relay will switch on
for 4 hours between 18:00-22:00
00
02
04
06
08
10
12
14
16
22
20
18
24
To prevent the operation of the program assigned the
lock menu is placed
C2:
C1:
9 ) SERVICE MODE ( ):
Lets the user control and maintain in urgent situations In order to choose
service mode, lock mode shouldnt be selected before In the main menu,
up and down buttons ( ) should be pressed at the same time. When
this mode is selected, assigned programs can not change the relay
position   and lock signs ( ) are displayed In order to exit the
service mode, up and down buttons should be pressed at the same time
Date information will be displayed instead of   Lock sign will be
removed In case of escaping the service mode, the last program
continues its execution For user safety, it is not possible to enter to lock
( ) and factory settings ( ) modes, when service mode is
activated
Regarding to assign programs, dashs which are next to the numbers of
00 - 24, represent for switch on and switch off time of the relay Each
dash represents two hours
Longitude value is set in this menu If the longitude is east,
degree value is set directly If the longitude is west, degree value
is subtracted from 360° and then entered (For example, Istanbul,
East (e) 29°) For instance, longitude value is 99° west for Mexico
City and so longitude value must be set as '261' (360-99=261)
Values which are mentioned in Table-1 are calculated before Therefore,
there is no need to calculate these values again
Below diagrams show that how devi es an be lo ked.
When LOCK mode is disabled, device continues to work by
the last program
C2:
C1:
Below diagrams show that how LOCK menu an be disabled.
This display represents the sunrise time which is calculated
according to coordinate, season and real time settings According
to this example, sunrise time is 05:30 AM
This display represents the sunset time which is calculated
according to coordinate, season and real time settings
According to this example, sunset time is 18:38 PM
If switch on time is set 19:01 instead of 18:00, 18-
20 interval does not have any dashes and also
working time becomes 02:59 instead of 04:00
24
00
02
04
06
08
10
12
14
16
22
20
18
ASTRONOMIC RELAY (DTR-10t)
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
SA
ESC SET
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
SA
ESC SET
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
SA
ESC SET
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
SA
ESC SET
It is shown on time of relay if the real time clock has passed 18:00
1.6) Day sele tion ( / , .......... , / ) :
As last, working days for selected programs are set This setting can be
done for all days starting from Monday
If YES selected, program function is enabled for related day
If NO selected, program function is disabled for related day
As above example, program function is enabled for Monday, Wednesday
and Friday
7 ) FACTORY SETTING ( ) :
In this menu, all settings are reset except hour and date By selecting
option, all programs are reset, counters are reset, relays, which are
switched on, are switched off, lock mode is disabled Coordinates are
programmed according to Istanbul, season is set as auto and LCD contrast
value is set as '13'
6.3) If summer/winter time application does not exist in the related
region, option must be selected
SET
SET SET
SET
ESC SETSET
SET
SET SET
SET
ESC SET
SET
SET
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
SET SET SET
SET SET
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
SET
ESC
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
C2:
C1:
C2:
C1:
C2:
C1:
SET SET
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
SET
ESC
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
C2:
C1: C2: C1: C2: C1: C2: C1:
The programming of geographical zone for London is mentioned above
SET SET
SET
ESC SET
SET SET
SET
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
SET SET SET ESC
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
SET SET SET ESC
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
8 ) LCD CONTRAST SETTING ( ) :
LCD contrast value can be set between '0-15' by user
SET SET SET ESC
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
Main Display
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24

DIMENSION
3
CONNECTION DIAGRAM
ASTRONOMIC RELAY (DTR-10t)
TYPE PK25
35 mm
90 mm
45 mm 62 mm
58 mm
32 mm
48 mm
35 mm
Lagos, Nigeria
Lefkosa, Cyprus
29-03-2009, 03:00 / 25-10-2009, 04:00
No kno n DST
29-03-2009, 03:00 / 25-10-2009, 04:00
No kno n DST
29-03-2009, 01:00 / 25-10-2009, 02:00
29-03-2009, 01:00 / 25-10-2009, 02:00
29-03-2009, 02:00 / 25-10-2009, 03:00
No kno n DST
05-04-2009, 02:00 / 25-11-2009, 02:00
No kno n DST
29-03-2009, 02:00 / 25-10-2009, 03:00
No kno n DST
No kno n DST
29-03-2009, 02:00 / 25-10-2009, 03:00
29-03-2009, 02:00 / 25-10-2009, 03:00
No kno n DST
No kno n DST
No kno n DST
15-02-2009, 00:00 / 18-10-2009, 00:00
No kno n DST
29-03-2009, 02:00 / 25-10-2009, 03:00
No kno n DST
15-03-2009, 00:00 / 11-10-2009, 00:00
No kno n DST
No kno n DST
29-03-2009, 03:00 / 25-10-2009, 04:00
No kno n DST
29-03-2009, 02:00 / 25-10-2009, 03:00
05-04-2009, 03:00 / 04-10-2009, 02:00
No kno n DST
22-03-2009, 00:00 / 22-10-2009, 00:00
No kno n DST
No kno n DST
29-03-2009, 02:00 / 25-10-2009, 03:00
Tablo-1 : Geographical locations in the world
No kno n DST
No kno n DST
No kno n DST
No kno n DST
27-03-2009, 00:00 / 30-10-2009, 01:00
29-03-2009, 02:00 / 25-10-2009, 03:00
29-03-2009, 02:00 / 25-10-2009, 03:00
29-03-2009, 03:00 / 25-10-2009, 04:00
29-03-2009, 04:00 / 25-10-2009, 05:00
29-03-2009, 00:00 / 25-10-2009, 00:00
No kno n DST
29-03-2009, 02:00 / 25-10-2009, 03:00
No kno n DST
29-03-2009, 02:00 / 25-10-2009, 03:00
15-03-2009, 00:00 / 18-10-2009, 00:00
24-04-2009, 00:00 / 25-10-2009, 00:00
No kno n DST
No kno n DST
29-03-2009, 02:00 / 25-10-2009, 03:00
03-04-2009, 00:00 / 01-11-2009, 00:00
No kno n DST
No kno n DST
No kno n DST
29-03-2009, 01:00 / 25-10-2009, 02:00
29-03-2009, 02:00 / 25-10-2009, 03:00
29-03-2009, 01:00 / 25-10-2009, 02:00
29-03-2009, 03:00 / 25-10-2009, 04:00
15-03-2009, 00:00 / 25-10-2009, 01:00
No kno n DST
No kno n DST
29-03-2009, 03:00 / 25-10-2009, 04:00
27-03-2009, 02:00 / 27-10-2009, 02:00
No kno n DST
No kno n DST
No kno n DST
Addional Reserv Time 6-10 hours
Program Number
5 Years
Program Reserv Time
15
Please, look at the lateral label
Display
Accuracy
Power Consumption
Me hani al Features
Equipment Protection Class
Ambient Temperature
Degree of Protection
Installation
Dimension
Weight
Quantity in 1 carton
Refresh Time
Output Contact
Operating Range (Auxiliary Supply)
Operating Voltage (Un)
Ele tri al Features
1,3 LCD
1 sec /Day
< 3 VA
60 sec
1 Output Contact / 16 A, 4000 VA
Please, look at the lateral label
Class II ( )
-5°C, +50°C
IP20
Rail Mounted
PK25
0,2 kg
5 pcs
TECHNICAL FEATURES
Note: Different operating voltages are available upon request.
Please notify voltage with the order.
Tablo-2 : Menu abbreviations
Time (Date, hour)
Sunrise
Sunset
Monday
Tuesday
Enter
Delete
1st Relay
Program
On
Off
Lock (Manual)
Coordinate
Latitude
North
Selected
Wednesday
Thursday
Friday
Saturday
Sunday
Counter
South
Time difference
Choice
Locked
Unlock
Longitude
Not use
Factory Settings
LCD contranst
Load
Season
Automatic
Manual
Winter / Summer interval
Winter / Summer interval
Cronogram (switch on & off time) of C1 relay
L1
A1 A2
N
L2
L3
Un
C1
C1
132

A4036 / Rev.2
Wrong appli ation : This relay will switch
on at sunset timeand will switch off at sunrise
time
Example appli ation: This relay will switch
on at sunrise time and will switch off at sunset
time
In this application, there is a mistake at P06
program when, switch off time settings are
done for weekdays Relays will switch off
according to the sunrise time and so program
settings are wrong for Tuesday, Thursday and
Saturday
4
ASTRONOMIC RELAY (DTR-10t)
ESC
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
ESC
SU
C2:
C1:
00
02
04
06
08
10
12
14
16
22
20
18
24
ESC
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
ESC