Enwork SKYLINE User manual

TI0050 - Skyline Freestanding Installation Guide - Rev A.
SKYLINE FREESTANDING TOPPER
SCREENS INSTALLATION GUIDE
SCREENS
WARNING:
Acrylic screens scratch and scuff easily. After removing
protective lm, immediately and carefully install the screen.
DO NOT remove protective lm from acrylic screens, then stack
them in a pile or against each other. Experience shows this will
cause marring and scratching.

INSTALLATION GUIDE
1) PARTS AND FASTENERS INCLUDED
2) TOOLS AND SUPPLIES REQUIRED
Screen Panel
2x Phillips Screwdrivers
Binding Bolt Pair
Tape PNM-1947 BRACKET

INSTALLATION GUIDE
Sandwich the Acrylic or Acoustic Panel Screen between the
Brackets, aligning the holes in the screen and the bracket.
Attach them all together with the Binding Bolt pair.
Peel one side of the tape off and stick it down centered
onto each Bracket base.
Peel the second backer off the tape and place the
assembly in its desired location. Hold the assembly
down rmly for 30 seconds to activate the tape.
** NOTE: The tape cure time is 24 hours.
Please allow tape to cure before using screen.**
FIGURE 1
FIGURE 2
FIGURE 3
3) ASSEMBLY:

Specications subject to change without notice.
Rev 06.2020
1.800.815.7251
www.enwork.com
12900 Christopher Dr. Lowell, MI 49331