Epoch Design DAKOTA 5375 User manual

DAKOTA 4 DRAWER DESK • MODEL # 5375
WITH OPTIONAL DAKOTA HUTCH • MODEL # 5376
Congratulations on the purchase of your Dakota Desk.This desk has been crafted to the
highest standards of quality and safety and will give you many years of enjoyment and
practical use.
Because this desk is made of natural wood and manufactured wood there may be variations in
color and grain, and minor checking may occur.This is normal and does not compromise the
integrity of your desk.
On this insert you will find a list of hardware and parts necessary for assembly, as well as
detailed instructions. Assembly is quite simple and requires only a Phillips Head screwdriver.
Assembly will be most easily accomplished if you take the time to carefully sort the hardware
and familiarize yourself with the function of each piece.
If you need assistance with assembly, part replacement or any other matter, contact the
Toll-Free Epoch Design Service Center from anywhere in the Continental United States,
Monday through Friday, 9AM - 5PM Pacific Standard Time at 1-800-589-7990.You may also fax
your request or comments to 425-284-0885 or email [e-mail] and a service
representative will respond.
Thank you and Enjoy
EPOCH DESIGN, LLC

2 Connector Brackets 8 20mm Wood Screws
HARDWARE LIST
2) Attach the safety connector brackets using 4
wood screws for each connector.
(8 20mm Wood Screws)
1) Carefully lower and align the hutch on to the back
of the desk.
PARTS
Tip-Over Straps
"parts pack"
WARNING:
Furniture tipping over can create a significant hazard in the home, particularly to young
children, although adults can be injured as well.
It is recommended that casegoods over 30" be secured with some form of tip-over prevention
device. This desk comes with anti Tip-Over Straps that reduce the risk of tip-over. These can be
easily installed in minutes.We strongly recommend that you use them, especially where
children are concerned and where earthquakes may pose a hazard.
If you have the optional DAKOTA HUTCH (MODEL #5376),
please follow the instructions below.
3) Attach the tip-over straps between the HUTCH
and the WALL.
NOTE: NOT BETWEEN THE DESK AND THE WALL