BROSA Alexa Bench User manual

ASSEMBLY GUIDE
Alexa Bench
v1.0

Components
Unpacking
Upon unpacking your bench from it’s delivery box, you should have the body
of the bench. Additional components are packed inside the body, you will
learn how to access and utilise these components in the next steps.
Turn the bench body so that the underside is facing you. Uncover the bottom
fabric and follow the coloured string to the additional components.
Bench body x 1
Hardware
D x 8
A x 1 B x 8 C x 8
What you need
2 3
1
Leg x 2 Leg x 2

Step 1
Step 2 Cover the bottom with the bottom fabric again.
Place the bench body on a level surface with the
bottom side facing up. Align a leg (2) with corre-
sponding corner exactly as below diagram shows,
making sure the screw holes are aligned and the
shoulders of the leg are resting on the sideboards of
the bench body. Fit a spring washer (C) to a bolt (D)
followed by a at washer (B) and insert it into a hole
and screw it using the allen key (A). Repeat for all four
legs.
D X 8
A x 1
B x 8
C x 8
2
2
3
3
A
B
C
D

Step 3 Gently lift the bench and place upright on a level
surface. Enjoy your new bench!