fantastic furniture Willow MK2 User manual

Willow MK2
Bed King Single
fantasticfurniture.com.au
Version 1.0

We’re thrilled you’ve chosen Fantastic Furniture
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
fantasticfurniture.com.au Page 2
to help create a home you’ll love!
Look like you’ve found
your Fantastic!

Read through the instructions carefully
before you begin.
Make sure you have all the required tools.
Never use power tools unless instructed.
Identify and lay out all of the components
before you begin assembly.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
!If you are having any diculties assembling your product,missing any hardware or
components please visit our website Help
Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
fantasticfurniture.com.au Page 3
Assembly checklist
Useful information

Part List:
Box 1:
Headboard (P1);
Footboard (P2);
3 x Support Legs (P5);
30 x Plastic Slat Caps (P8);
Box 2:
2 x Side Rails (P3)
2 x Cross Bars (P4);
1 x Centre Rail (P6);
1 x Cross Bar (P7);
15 x Slats (P9).
Hardware pack
2 x 840mm Adhesive Strip
（H8)
1 x 100mm Adhesive Strip
（H9)
Page 4
15 x Slats
(P9)
30 x Plastic Slat Caps
(P8)
What you need
to assemble the product
Please make sure you have all these parts before you start.
1 x Headboard (P1)
1 x Footboard (P2) 2 x Side Rails (P3)
1 x Allen Key
(H3)
13 x Hex Nuts
(H4)
1 x Spanner
(H5)
fantasticfurniture.com.au
1 x Centre Rail (P6)
3 x
Support Leg (P5)
2x Cross Bar (P4)
1x Cross Bar (P7)
12 x Metal Washers
(H7)
12 x Short Bolts
(H1)
M6x20
4 x Long Bolts
(H2)
M6x60
6 x Medium Bolts
(H6)
M6x40
3 x Large Medium Bolts
(H10)
M6x45

Step 2
Page 5
Step 1
You will need
4 x Short Bolts
(H1)
1 x Allen Key
(H3)
(P2)
(P1)
(H1)
5mm
1.
2.
(H1)
(H3)
Insert 4 x short bolts (H1) into the bottom holes of the headboard (P1) and footboard (P2) using
the allen key (H3). Do not fully tighten the bolts and leave a gap of 5mm as shown.
(H2)
(H3)
(H4)
(H5)
Attach the 2 x side rails (P3) to the headboard (P1) and footboard (P2).
Slot the side rails onto the bolts as shown and insert 4 x short bolts (H1) into the top
holes with the allen key (H3).
Attach the cross bars (P4 ) onto the 2 x side rails (P3) using 4 x long bolts (H2)
and 4 x hex nuts (H4).
Attach the cross bar (P7 ) onto the 2 x side rails (P3) using 2 x Large Medium bolts
(H10) and 2 x hex nuts (H4).
Tighten with the allen key (H3) and spanner (H5) as shown. Now fully tighten all bolts.
fantasticfurniture.com.au
(P3)
(P3)
(P7)
(P4)
(P4)
2 x Large Medium
Bolts
(H10)
M6x45
You will need
4 x Short Bolts
(H1)
M6x20
4 x Long Bolts
(H2)
M6x60
1 x Allen Key
(H3)
6 x Hex Nuts
(H4)
1 x Spanner
(H5)
(H10)
(H3)
(H4)
(H5)

Peel off the adhesive strip protective paper and apply downward pressure on the
centre rail with the strip until fully applied.
Step 4
Page 6fantasticfurniture.com.au
Step 3
You will need
You will need
1 x Allen Key
(H3)
H1
H1
H10
H4H5
H3
H3
(P4)
(P6)
(P6)
(P4)
(P4)
(P7)
Secure the centre rail (P6) to the 2 x
cross bars (P4) with 4 x short bolts
(H1), tighten with the allen key (H3).
Secure the centre rail (P6) under the
cross bar (P7) with 1 x large medium bolt
(H10) and 1 x hex nut (H4), tighten with the
allen key (H3) and spanner (H5) as shown.
(P7)
(P6)
1 x Hex Nuts
(H4)
1 x Spanner
( H5 )
H8
H8
H9
(P6)
4 x Short Bolts
(H1)
M6x20
1 x Large Medium
Bolt
(H10)
M6x45
2 x 840mm
Adhesive Strips
（H8)
1 x 100mm
Adhesive Strip
（H9)

You will need:
30 x Plastic Slat Caps
(P8)
Push 30 x plastic slat caps (P8) firmly onto 15 x slats (P9).
Step 6
Page 7fantasticfurniture.com.au
15 x Slats
(P9)
(P9)
(P8) (P8)
Attach the 3 x support legs (P5) to the centre rail (P6) with 6 x medium bolts (H6) 12 x metal
washersand 6 x hex nuts (H4).
Tighten with the allen key (H3) and spanner (H5) as shown.
Step 5
(P6)
(P5)
(P5)
(P5)
You will need
6 x Hex Nuts
(H4)
12 x Metal
Washers
( H7 )
1 x Allen Key
( H3 )
1 x Spanner
( H5 )
(P6)
H3 H6H7
H5
H4
H7
(P5)
6 x Medium
Bolts (H6)
M6x40

IMPORTANT: Fully tighten all bolts on bed. Periodically check to ensure all bolts remain tight.
In the interest of our environment please dispose of all packaging thoughtfully.
Step 7
Step 8
Job Complete!
fantasticfurniture.com.au Page 8
Lower the slat (P9) with the end connectors (P8) to the side rails (P3). Ensure the plastic
slat caps are in place over the side rail holes and apply downward pressure until the
plastic slat caps are fully inserted into the rails. Repeat for every bed slat until finished.