ETEKCITY EB9380H User manual

1
Questions or Concerns? [e-mail] • [phone]
Digital Body
Weight Scale
Model: EB9380H
User Manual

2
Thank you for purchasing the
Digital Body Weight Scale by Etekcity.
If you have any questions or concerns,
please reach out to our helpful Customer
Support Team at [e-mail].
We hope you enjoy your new scale!
BECOME AN ETEKCITIZEN
Get exclusive deals, giveaways, and product
registration. Better products for better living.
Find us at etekcity.com

3
Table of Contents
Package Contents
Specifications
Safety Information
Function Diagram
Before First Use
Operation
• Using the Scale
• Body Measuring Tape
• Replacing the Batteries
• Cleaning the Scale
• Calibrating the Scale
Troubleshooting
Warranty Information
Customer Support
3
3
4
6
7
8
8
9
9
10
10
11
12
14
Specifications
Package Contents
Weight Capacity 400 lb / 180 kg
Increments 0.1 lb / 0.05 kg
Weight Units lb / kg
Platform Tempered glass
Dimensions
LCD Display:
2.9 x 1.4 in / 7.4 x 3.6 cm
Scale:
11.8 x 11.8 x 0.8 in /
30 x 30 x 2.2 cm
Battery 2 x 1.5V AAA batteries
Auto-Off 20 seconds
x Digital Body Weight Scale
x Body Measuring Tape
x 1.5V AAA Batteries (Pre-Installed)
x Quick Start Guide
1
1
2
1

4
Safety Information
Please read and follow all instructions and safety
guidelines in this manual.
General Use
• Check the scale before using. Do not use the
scale if it is damaged in any way.
• Do not strike or bang on the scale and do not
use the scale if there is a slight crack on the
glass. Due to the nature of tempered glass, the
glass will shatter if there is a slight crack. If you
see a crack, contact Customer Support (see
page 14).
• The glass platform is slippery when wet. Always
make sure the platform and your feet are dry
before stepping onto the scale.
• Place the scale on a hard, flat surface.
• To weigh safely and accurately, stand with your
feet shoulder-width apart while on the scale. Do
not stand on the edge of the scale or jump on the
scale.
• Avoid standing on the scale for a long period of
time.
• Do not overload the scale. Maximum weight
capacity is 400 lb / 180 kg.
• Keep the scale in a cool area with low humidity.
Keep the scale away from heat sources, such as
ovens or heaters.
• Store the scale horizontally, not vertically.
• For household use only. This scale is not intended
for commercial use.
• Handle with care.

5
Batteries
• Do not mix new and old batteries.
• If the scale is not in use for a long period of time,
remove the batteries to extend the lifetime of the
scale.
SAVE THESE
INSTRUCTIONS

6
Function Diagram
A. Platform
B. Display
C. Anti-Skid Padding
A
B
D. Battery Compartment
E. Unit Conversion Button
C E D

7
1. Open the battery compartment on the underside
of the scale. Remove the included AAA batteries.
[Figure 1.1]
2. Remove the plastic strip.
3. Replace the batteries. Follow the guidelines in
the battery compartment to match the +and –
terminals. [Figure 1.2]
Before First Use
Figure 1.1 Figure 1.2

8
Note: Press the unit switching button on the
underside of the scale to switch between pounds (lb)
and kilograms (kg).
Operation
Using the Scale
1. Place the scale on a hard, flat surface.
Note: Using the scale on soft surfaces such
as carpets and mats will cause inaccurate
measurements.
2. Step onto the scale. The scale will automatically
turn on and start measuring your weight.
[Figure 2.1]
3. Keep standing on the scale until the digits on
the display flash 3 times, showing your final
measurement. [Figure 2.2]
Figure 2.2
Figure 2.1

9
Body Measuring Tape
Use the included body measuring tape to track your
fitness progress. Wrap the measuring tape around
the body part you are measuring.
Replacing the Batteries
1. Open the battery compartment on the underside
of the scale.
2. Remove the old batteries and dispose of them
properly.
3. Install 2 new 1.5V AAA batteries. Make sure the
polarities match. [Figure 3.1]
4. Close the battery compartment, place the scale
on a hard, flat surface, and wait for the display to
show “ ” before using.
Figure 3.1

10
Cleaning the Scale Calibrating the Scale
1. Use a slightly damp cloth to clean the surface
of the scale, followed by a soft, dry cloth to wipe
away the remaining moisture.
2. Do not use chemical or abrasive cleaning agents
to clean the scale.
If the scale has been moved or flipped upside down,
it must be calibrated to ensure accurate results.
1. Place the scale on a hard, flat surface.
2. Step on the scale with one foot until the display
lights up, then step off.
3. The scale will show “ ”, indicating that the
calibration was successful.