FabiaTech FB2642 User manual

FabIATech Corporation
IPC Solution
Website: http://www.fabiatech.com
Email: [email protected]
FB2642Socket370PIII/Celeron
Half-sizeCPUCardUser’sManual
May 2004
Version: 1.3
Part Number: FB2642

Copyright
©Copyright 2001FabIATech Corporation. The content of this publication may not be
reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated
into any language, or transcribed in any form or by any means, electronic, mechanical,
magnetic etc. or otherwise without the prior written permission of FabIATech Corporation.
Disclaimer
FabIATech makes no representation of warranties with respect to the contents of this
publication. In an effort to continuously improve the product and add features,
FabIATech reserves the right to revise the publication or change specifications contained
in it from time to time without prior notice of any kind from time to time.
FabIATech shall not be reliable for technical or editorial errors or omissions, which may
occur in this document. FabIATech shall not be reliable for any indirect, special, incidental
or consequential damages resulting from the furnishing, performance, or use of this
document.
Trademarks
Trademarks, brand names and products names mentioned in this publication are used for
identification purpose only and are the properties of their respective owners.
Technical Support
If you have problems or difficulties in using the system board, or setting up the relevant
devices, and software that are not explained in this manual, please contact our service
engineer for service, or send email to [email protected].
Returning Your Board For Service & Technical Support
If your board requires servicing, contact the dealer from whom you purchased the
product for service information. You can help assure efficient servicing of your product by
following these guidelines:
 A list of your name, address, telephone, facsimile number, or email address where
you may be reached during the day
 Description of you peripheral attachments
 Description of you software (operating system, version, application software, etc.)
and BIOS configuration
 Description of the symptoms (Extract wording any message)
For updated BIOS, drivers, manuals, or product information, please visit us at
www.fabiatech.com
ii

TableofContent
FB2642 Socket 370 PIII / Celeron Half-size CPU Card User’s Manual................................................... i
Table of Content ......................................................................................................................................iii
Chapter 1 Introducing theFB2642 System Board...................................................................................1
Overview...............................................................................................................................................1
Layout....................................................................................................................................................2
Specifications.......................................................................................................................................3
Packing List ...........................................................................................................................................4
Chapter 2 Hardware Installation ............................................................................................................5
Before Installation ................................................................................................................................5
Hardware Features..............................................................................................................................6
SW1 (3,4): Selecting CPU Base Clock and PCI Clock .................................................7
J1 & J5: CPU Fan Connector & System Fan Connector.............................................8
J2: USB Connector............................................................................................................8
J13: Reset Header.............................................................................................................9
J9: Power LED Header......................................................................................................9
J11: HDD LED Header.......................................................................................................9
CN2, CN3: Keyboard/Mouse Connector ...................................................................10
CN5: RJ45 LAN Connector............................................................................................10
CN8, CN9: IDE hard Disk Connector............................................................................11
DB1 & CN4: RS232 Serial Ports 1,2 Connectors and Jumpers...................................12
CN6: 26-pin Parallel Port Connector............................................................................14
CN7: Floppy Connector ................................................................................................15
BZ1 & J10: On-Board Buzzer & External Speaker Header .........................................15
J7: Temperature Sensor Header...................................................................................16
JP1: CMOS Data Clear Jumper....................................................................................16
LED1:On-Board Power LED............................................................................................16
iii

J6: TTL I/O Connector.....................................................................................................17
CN1: Power Connector (9-pin 2.54mm JST) ...............................................................17
J8: External TX-LED with LAN LED Header....................................................................18
DB2: CRT connector.......................................................................................................18
Chapter 3 BIOS Setup............................................................................................................................19
Overview.............................................................................................................................................19
BIOS Functions..........................................................................................................................20
Keyboard Convention............................................................................................................21
STANDARD CMOS SETUP...................................................................................................................22
ADVANCED CMOS SETUP.................................................................................................................24
ADVANCED CHIPSET SETUP...............................................................................................................29
POWER MANAGEMENT.....................................................................................................................32
PCI/PLUG AND PLAY..........................................................................................................................34
PERIPHERAL SETUP..............................................................................................................................37
Hardware Monitor Setup..................................................................................................................40
Password Setup..................................................................................................................................41
Chapter 4 Driver and Utility...................................................................................................................43
VGA Driver for WIN98/WIN95 ...........................................................................................................43
BIOS Flash Utility..................................................................................................................................44
LAN Utility.............................................................................................................................................44
Watchdog Timer................................................................................................................................45
Watchdog Timer Setting ........................................................................................................46
Watchdog Timer Enable & Trigger .......................................................................................47
Watchdog Timer Disabled.....................................................................................................48
Programming RS-485.........................................................................................................................48
Chapter 5 Technical Reference ...........................................................................................................53
Trouble Shooting for Error Messages...............................................................................................53
Technical Reference.........................................................................................................................56
Real-Time Clock and Non-Volatile RAM..............................................................................56
CMOS RAM Map.....................................................................................................................58
I/O Port Address Map.............................................................................................................59
Interrupt Request Lines (IRQ).................................................................................................60
DMA Channel Map.................................................................................................................61
DMA Controller 2.....................................................................................................................61
iv

Serial Ports.................................................................................................................................62
Parallel Ports.............................................................................................................................66
Appendix................................................................................................................................................69
Dimension ...........................................................................................................................................69
Special Features.................................................................................................................................70
J3: Feature Connector (J3: 44-pin 2.0mm IDC)..................................................................70
v

Chapter1IntroducingtheFB2642SystemBoard
Overview
The FB2642 is a Socket 370 all–in-one CPU card. This user’s manual provides information
on the physical features, installation, and BIOS setup of the FB2642.
Built to unleash the total potential of the Pentium Processor, the FB2642 is a single
boards computer capable of handling today’s demanding requirements. Able to
support up to1.3 MHz /Pentium-III/Tualatin/Celeron/Coppermine CPUs, this unit
supports 10/100M interface network port, synchronous pipe line burst SDRAM up to
512MB, and on board VGA port uses the 815E chipset with UMA share memory with
4MB caching buffer.
Each FB2642 has two ports for I/O communications. One RS-232C and one RS-232C
/422/485/IrDA ports are available. There is also a watchdog timer that can be
configured from software to automatically reset the system or generate an interrupt.
And for easy configuration, AMI BIOS are available.
Power management is also featured to lower the rate of consumption. The unit
supports doze mode, <Suspend Mode> and <Standby mode> as well as it adheres to
the “Green Function” standard.
The FB2642 is perfect for POS and POI applications, network systems, panel / MMI’s,
order entry kiosks and test equipment. The Compactsize is only 185X122mm.
1

FabIATech Corporation
Layout
J13 J11 J10
J8
J7
J12
J9
DB2 J6
J4
CN5
CN4
J2
CN3
CN2
BT1
J3 J5
J1
CN8 CN7
JP1
CN9
CN1
SW1
BZ1
DIMM1
JP2
J14
CN6
LED1
2

FabIATech Corporation
Specifications
 Supports 600Mhz~1.300 GHz PIII/Tualatin/Celeron/Coppermine CPU. (Socket 370
with 0.18 and 0.13 micron technology)
 Compact size slot card with PICMG PCI expansion bus.
 Intel chipset 815E, ICH2 and 128KB or above L2 cache inside the CPUs.
 Supports one 168-pin DIMM socket (PC-100/133 SDRAM), 512MB maximum.
 100M/10M Ethernet with RJ-45 connector.
 Intel 815E chipset provides CRT use UMA share memory VRAM with 4MB
caching buffer.
 Parallel port, floppy and two IDE channels supports four IDE devices with ultra
DMA 33. In addition, channel one IDE supports ultra DMA 33/66/100.
 One RS-232 and one RS-232/RS-422/RS-485/IrDA.
 PS/2 compatible keyboard and mouse interface.
 E2KEY function for safe CMOS data keeping. (Option)
 On-board buzzer and LED indicator.
 Flash BIOS with easy upgrade utility.
 Software programmable watchdog timer.
 Two USB ports and hardware monitoring functions.
 Provides CPU & case cooling fan connector for monitoring.
 Provide one piggyback space for panel link, audio and Intel LAN. (Optional)
 EMI Considered on every output signals.
 Compact size, 185 mm x 122 mm.
3

FabIATech Corporation
PackingList
Upon receiving the package, verify the following things. Should any of the mentioned
happens, contact us for immediate service.
• Unpack and inspect the FB2642 package for possible damage that may occur
during the delivery process.
• Verify the accessories in the package according to the packing list and see if
there is anything missing or incorrect package is included.
• If the cable(s) you use to install the FB2642 is not supplied from us, please make
sure the specification of the cable(s) is compatible with the FB2642 system
board.
Note: after you install the FB2642, it is recommended that you keep the diskette or
CD that contains drivers and document files, document copies, and
unused cables in the cartoon for future use.
The following lists the accessories that may be included in your FB2642 package.
Some accessories are optional items that are only shipped upon order.
• One FB2642 system board
• One compact disc containing manual file in PDF format and necessary
drivers and utilities
• One 40-pin hard disk drive interface cable
• One 34-pin floppy drive interface cable
• One serial port and parallel port interface cable with bracket
• One mouse port adapter cable with bracket
• One 5-page hard copy of Quick Installation Guide
• One 2-port USB adapter cable (Optional)
4

FabIATech Corporation
Chapter2HardwareInstallation
To set up a FB2642 system board, complete the description Chapter 2 and Chapter 3.
This chapter introduces the system board connectors, jumper settings and then guides
you to apply them for field application.
BeforeInstallation
Before you install the system board, make sure you follow the following descriptions.
1. Before removing the board from its anti-static bag, wear an anti-static strap to
prevent the generation of Electricity Static Discharge (ESD). The ESD may be
created from human body that touches the board. It may do damage to the
board circuit.
2. Install or unplug any connector, module, or add-on card, be sure that the power is
disconnected from the system board. If not, this may damage the system board
components, module, or the add-on-card.
3. Installing a heat sink and cooling fan is necessary for heat dissipation from your
CPU. If heat sink or cooling fan is not mounted, this may cause the CPU fail due to
over-heating problem.
4. When you connect the connectors and memory modules, be careful with the pin
orientations.
5

FabIATech Corporation
HardwareFeatures
The following lists the connectors and jumpers to install the FB2642.
Item Description
CN1 9-pin power connector
CN2, CN3 Keyboard and Mouse connector
CN4 10-pin RS-232 port 2 connector
CN5 RJ45-Lan connector
CN6 26-pin 2.0mm parallel port connector
CN7 34-pin 2.54mm floppy connector
CN8 40-pin 2.54mm IDE 1 hard disk connector
CN9 44-pin 2.0mm IDE 2 hard disk connector
J1, J5 3-pin for case/CPU cooling fan
J2 USB connector
J3 External Bus for Piggyback place with Lam, audio, Panel Link
J4 3-pin RS232C touch screen header for serial port 2
J6 5-pin for TTL I/O
J7 2-pin for external temperature sensor
J8 2-pin for external TX-LED with LAN
J9 3-pin for External power LED header
BZ1, J10 Onboard Buzzer and external speaker header
J11 2-pin HDD LED Indicator header
J12 5-pin RS232C IrDA header for serial port 2
J13 2-pin Reset header
JP1 To clear CMOS data
JP2 3-pin Terminal Resistor of Serial port 2
DB1 RS232 9-pin D – type male connector
DB2 CRT connector
LED1 Power LED indicator
SW1 To selects CPU base clock and RS232/RS422/RS485
6

FabIATech Corporation
 SW1 (3,4): Selecting CPU Base Clock and PCI Clock
J13 J11 J10
J8
J7
J12
J9
DB2 J6
J4
CN5
CN4
J2
CN3
CN2
BT1
J3 J5
J1
CN8 CN7
JP1
CN9
CN1
SW1
BZ1
DIMM1
JP2
J14
CN6
LED1
SW1
OFF
4
3
1
2
The following lists the switch settings of CPU Base Clock and PCI clock.
SW1-3 SW1-4 CPU Base Clock
PCI Clock Remark
Off Off 133 MHz 33 MHz Tualatlin
Off On Reserved Reserved
On Off 100Mhz 33Mhz Default
On On 66Mhz 33Mhz
 Caution (*1): Avoid any of the following conditions that will directly destroy or
severely cause damage to your CPU, or make your system unstable if you
select an inappropriate base clock.
 Coppermine CPUs: Celeron over 66 MHz CPU base clock and PIII over 100/133
MHz CPU base clock
 Pentium III (Tualatlin) CPUs: Celeron over 100 MHz CPU base clock and PIII
over 133 MHz CPU base clock
7

FabIATech Corporation
 J1 & J5: CPU Fan Connector & System Fan Connector
For CPU & system cooling fan
J13 J11 J10
J8
J7
J12
J9
DB2 J6
J4
CN5
CN4
J2
CN3
CN2
BT1
J3 J5
J1
CN8 CN7
JP1
CN9
CN1
SW1
BZ1
DIMM1
JP2
J14
CN6
LED1
J1&J5 Description
1 Ground
2 +12V
3 Speed-In
1
J1, J5
3
 J2: USB Connector
J2 is a 10-pin connector. Use included adapter cable (Optional) for transfering to
standard double port USB connector.
J13 J11 J10
J8
J7
J12
J9
DB2 J6
J4
CN5
CN4
J2
CN3
CN2
BT1
J3 J5
J1
CN8 CN7
JP1
CN9
CN1
SW1
BZ1
DIMM1
JP2
J14
CN6
LED1
J2
2
1
10
9
J2 Signal J2 Signal
1 USBV0 2 Case Ground
3 USBD0- 4 USBG1
5 USBD0+ 6 USBD1+
7 USBG0 8 USBD1-
9 Case Ground 10 USBV1
8

FabIATech Corporation
 J13: Reset Header
J13 is a 2-pin header for connecting to system reset bottom. Short-circuit these 2 pins
to hardware reset FB2642 as well as restart system. It is similar to power off the system
and then power it on again.
J13 J11 J10
J8
J7
J12
J9
DB2 J6
J4
CN5
CN4
J2
CN3
CN2
BT1
J3 J5
J1
CN8 CN7
JP1
CN9
CN1
SW1
BZ1
DIMM1
JP2
J14
CN6
LED1
 J9: Power LED Header
J13 J11 J10
J8
J7
J12
J9
DB2 J6
J4
CN5
CN4
J2
CN3
CN2
BT1
J3 J5
J1
CN8 CN7
JP1
CN9
CN1
SW1
BZ1
DIMM1
JP2
J14
CN6
LED1
 J11: HDD LED Header
J13 J11 J10
J8
J7
J12
J9
DB2 J6
J4
CN5
CN4
J2
CN3
CN2
BT1
J3 J5
J1
CN8 CN7
JP1
CN9
CN1
SW1
BZ1
DIMM1
JP2
J14
CN6
LED1
J13
2
1
Pin1 Reset +
Pin2 Reset -
J9
31
Pin 1:Power LED +
Pin 2:Power LED -
Pin 3:Power LED -
J11
2 1
Pin1Hard Disk LED+
Hard Disk LED-
Pin2
9

FabIATech Corporation
 CN2, CN3: Keyboard/Mouse Connector
CN2 is a standard PS/2 type keyboard connector, so any PS/2 type keyboard can plug
into CN2 directly without extra adapter cable. CN3 provides PS/2 mouse interface, use
the included mouse adapter cable to connect between CN3 and standard PS/2
mouse.
J13 J11 J10
J8
J7
J12
J9
DB2 J6
J4
CN5
CN4
J2
CN3
CN2
BT1
J3 J5
J1
CN8 CN7
JP1
CN9
CN1
SW1
BZ1
DIMM1
JP2
J14
CN6
LED1
CN3
12
34
56
 CN5: RJ45 LAN Connector
The CN5 contain LAN twist pair signals and LAN accesses indicator signal is RJ45 type
connector with 2 LED indicators. The up side LED (orange) indicates data is accessing
and the down side LED (green) indicates on-line status. (When lighted indicates on-line
and off indicates off-line).
J13 J11
J10
J8
J7
J6 J3
CN8
CN9
J12
J9
DB2
J4
CN5
CN4
J2
CN3
CN2
BT1
J5
J1
CN7
JP1
CN1
SW1
BZ1
DIMM1
JP2
J14
CN6
LED1
RJ45
Signal RJ45 Signal
1 TPTX+ 5 FBG1
2 TPTX - 6 TPRX -
3 TPRX+ 7 FBG2
4 FBG1 8 FBG2
The following lists the pin assignment of RJ45.
CN2 Front View
1
6
CN3 CN2 Signal
1 2 Mouse Data
2 1 Keyboard Data
3 3 Ground
4 4 VCC
5 6 Mouse Clock
6 5 Keyboard Clock
1
CN5
(Front View)
8
10

FabIATech Corporation
 CN8, CN9: IDE hard Disk Connector
CN 8 is 40-pin 2.54mm IDE hard disk connector. CN9 is 44-pin 2.0mm IDC connectors.
The included hard disk is able to attach up to four hard disk drives.
J13 J11 J10
J8
J7
J12
J9
DB2 J6
J4
CN5
CN4
J2
CN3
CN2
BT1
J3 J5
J1
CN8 CN7
JP1
CN9
CN1
SW1
BZ1
DIMM1
JP2
J14
CN6
LED1
CN8 – Hard disk connector
44 2
43 1
CN9 – Hard disk connector
1
2
39
40
The following table lists the pin description of CN8, CN9.
Pin Signal Pin Signal
1 -RESET 2 GROUND
3 DATA 7 4 DATA 8
5 DATA 6 6 DATA 9
7 DATA 5 8 DATA 10
9 DATA 4 10 DATA 11
11 DATA 3 12 DATA 12
13 DATA 2 14 DATA 13
15 DATA 1 16 DATA 14
17 DATA 0 18 DATA 15
19 GROUND 20 NOT USED
21 IDEDREQ 22 GROUND
23 -IOW 24 GROUND
25 -IOR 26 GROUND
27 IDEIORDYA 28 GROUND
29 -DACKA 30 GROUND
31 AINT 32 GROUND
33 SA 1 34 Not Used
35 SA 0 36 SA 2
37 CS 0 38 CS 1
39 HD LED A 40 GROUND
41 (CN9) VCC 42 (CN9) VCC
43 (CN9) GROUND 44 (CN9) Not Used
11

FabIATech Corporation
 DB1 & CN4: RS232 Serial Ports 1,2 Connectors and Jumpers
The DB1 connector on bracket is 9-pin D-type male connector the serial port 2 adapter
cables are used to transfer 10-pin IDC connector into standard DB9 connectors.
J13 J11 J10
J8
J7
J12
J9
DB2 J6
J4
CN5
CN4
J2
CN3
CN2
BT1
J3 J5
J1
CN8 CN7
JP1
CN9
CN1
SW1
BZ1
DIMM1
JP2
J14
CN6
LED1
 Serial Port 2 (CN4, SW1, J12, J4, JP2)
Serial port 2 is designed for multiple proposes. It could be RS-232C, RS-422 or RS-485 by
selecting SW1 or changing the setting in BIOS setup program. And JP2 is use to enable
or disable terminator if RS-485 mode is selected. Serial port 2 also could be configured
as Infra (IrDA) interface by changing the setting in BIOS setup program. J12 is use to
interface with Infra module. When touch screen module is used, you could connect J4
to touch screen controller directly and internally instead of connect from CN4
connector.
J13 J11 J10
J8
J7
J12
J9
DB2 J6
J4
CN5
CN4
J2
CN3
CN2
BT1
J3 J5
J1
CN8 CN7
JP1
CN9
CN1
SW1
BZ1
DIMM1
JP2
J14
CN6
LED1
SW1-1 SW1-2 Signal
Off Off2 RS-232
Off On RS-485
On Off RS-422
On On Software*
DB1
6
9
JP2
3
2
1Pin 1,2 Close:
Terminator
Enabled
CN4
12
1
910
5
SW1
ON OFF
4
3
1
2
1Pin 2,3 Close:
Terminator
Disable
Default
2
Factory Preset: RS232
*Note: Changing the setting in
BIOS setup program
3
12

FabIATech Corporation
CN4 Signal RS422 RS485 DB9
1 -DCD2 1
2 -DSR2 6
3 RXD2 RX- 485- 2
4 -RTS2 TX- 7
5 TXD2 RX+ 485+ 3
6 -CTS2 TX+ 8
7 -DTR2 4
8 -RI2 9
9 GROUND 5
10 CASE GROUND
 J12: 5-pin Infrared Header
J12 provides infrared signals of serial port 2. The infrared signal is used to interface with
Infrared modules.
J13 J11 J10
J8
J7
J12
J9
DB2 J6
J4
CN5
CN4
J2
CN3
CN2
BT1
J3 J5
J1
CN8 CN7
JP1
CN9
CN1
SW1
BZ1
DIMM1
JP2
J14
CN6
LED1
 J4: Touch Screen Header
J4 provide basic RS-232C signals of serial port 2 respectively. The basic RS-232C signal is
used to interface with touch screen controller internally.
J13 J11 J10
J8
J7
J12
J9
DB2 J6
J4
CN5
CN4
J2
CN3
CN2
BT1
J3 J5
J1
CN8 CN7
JP1
CN9
CN1
SW1
BZ1
DIMM1
JP2
J14
CN6
LED1
J12
51
Pin 1: VCC
Pin 2: N.C.
Pin 3: IRRX
Pin 4: Ground
Pin 5: IRTX
J4
1
3
Pin 1: TXD
Pin 2: RXD
Pin 3: Ground
13

FabIATech Corporation
 CN6: 26-pin Parallel Port Connector
The included printer interface cable is used to transfer 26-pin connector into standard
DB25 connector.
J13 J11 J10
J8
J7
J12
J9
DB2 J6
J4
CN5
CN4
J2
CN3
CN2
BT1
J3 J5
J1
CN8 CN7
JP1
CN9
CN1
SW1
BZ1
DIMM1
JP2
J14
CN6
LED1
CN6
CN6 DB-25 Signal CN6 DB-25 Signal
1 1 -STROBE 2 14 -AUTO FORM FEED
3 2 DATA 0 4 15 -ERROR
5 3 DATA 1 6 16 -INITIALIZE
7 4 DATA 2 8 17 -PRINTER SELECT IN
9 5 DATA 3 10 18 Ground
11 6 DATA 4 12 19 Ground
13 7 DATA 5 14 20 Ground
15 8 DATA 6 16 21 Ground
17 9 DATA 7 18 22 Ground
19 10 -ACKNOWLEDGE 20 23 Ground
21 11 BUSY 22 24 Ground
23 12 PAPER 24 25 Ground
25 13 PRINTER SELECT 26 -- No Used
14