FabiaTech FB2611 Series User instructions

Version 1.0 FB2611 Series User’s Quick Setting Page 1/3
www.fabiatech.com ©2006 FabiaTech Corporation
Brief
The FB2611 is an all-in-one, PC/104, VIA MARK CoreFusionTM
CPU module. This user’s quick
setting provides the jumper settings, connector location, and their pin assignment.
1. Board Placement
CN6
J3
CN7
CN9
J1
CN3CN1CN2J2
JP3 CN4
CN8
LED1
CN5
J7
J6 BUS1
J4
J9
CPU
JP1
JP2
BT1
J5
J8 DIMM1
2. Packing List
1 FB2611x all-in-one PC/104 CPU board.
1 VGA (CRT interface) adapter cable.
1 44-pin hard disk drive interface cable.
2 serial port adapter cable
1 PS/2 keyboard and mouse port adapter cable.
1 USB cable, 1 Audio cable, and 1 FB4641 Audio/USB adapter board.
1 compact disc includes software utility.
3. Features
* On-board 533/800 MHz VIA MARK CoreFusionTM
CPU. (800MHz is the standard)
* VIA MARK CoreFusionTM
+VT82C686B chipset.
* 1 So-DIMM socket for up to 512MB PC-133 SDRAM.
* One 10/100 base-T Ethernet port.
* Supports CRT and LVDS interface with up to 32MB shared memory.
* 1 RS-232, 1 RS-232/485, 2 USB, and 1 PCI IDE interface.
* CompactFlash socket for 3.3V CompactFlash modules.
* PS/2 compatible keyboard and mouse interface.
* Provides header for external speaker and hard disk access LED.
* Provides 1 CPU cooling fan connector for monitoring.
* Provides AC97 Audio functions.
* Flash BIOS with easy upgrade utility.
* Power requires +5V only, 2.6A maximum.
* PC/104 form factor, 95.9 mm x 115.6 mm (3.775” x 4.55”)
4. Connectors, Headers, and Jumpers List
Name Function Name Function
CN1 CRT Connector (10-pin IDC) J1 External Battery Connector (2-pin JST)
CN2 LVDS Connector (30-pin DF-13) J2 Cooling Fan Connector (3-pin)
CN3 COM1 Connector (10-pin IDC) J3 KB. and Mouse Connector (6-pin JST)
CN4 Power Connector for LCD (5-pin JST) J4 External Speaker Header (J1*2)
CN5 COM2 Connector (10-pin IDC) J5 Reset Header (J1*2)
CN6 LAN Connector (RJ45 with LEDs) J6 Power Connector (3-pin)
CN7 IDE Connector (44-pin IDC) J7 External HDD LED Header (J1*2)
CN8 AC97 Audio Connector (12-pin IDC) J8 CompactFlash Socket (50-pin)
CN9 USB Connector (10-pin Header) J9 Reserved Header (J1*8)
BUS1 PC/104 Connector (64 and 40 pin) JP1 Battery Select Jumper (J1*3)
DIMM1 SoDIMM Socket (144-pin) JP2 CF Master/Slave Select Jumper (J1*3)
LED1 On-Board Power LED Indicator JP3 RS485 Terminator Select Jumper (J1*3)

Version 1.0 FB2611 Series User’s Quick Setting Page 2/3
www.fabiatech.com ©2006 FabiaTech Corporation
5. Connectors, Headers and Their Relative Jumpers
A. Reset Header (J5)
J5 is a 2-pin header for connecting to system reset bottom. Close these 2 pins to hardware
reset FB2611 and restart system booting.
B. Power Connector (J6: 3-pin 0.2” terminal block)
C. Keyboard and Mouse Connector (J3)
J3 provides PS/2 keyboard and mouse interface, use the included adapter cable to connect
between J3 and standard PS/2 devices.
D. LAN Connector and LED Indicators (CN6: RJ45)
CN6 is a standard RJ45 connector with 2 LEDs. The left side LED (orange) indicates data is
accessing and the right side LED (green) indicates on-line status. (When lighted indicates
on-line and off indicates off-line) The following lists the pin assignment of CN6:
E. USB Connector (CN9)
Use the USB adapter cable and FB4641x board, you can attach up to 2 USB devices.
F. Serial Port Connectors and Select Jumper (CN3,CN5 and JP3)
The included serial port cables are used to transfer CN3 and CN5 to 9-pin D-type male
connector. The following table shows the pin definitions of CN3, CN5, and 9-pin D-sub
connectors:
CN3 RS232 9-pin D-Sub RS232 RS485 CN5
1 -DCD1 1 -DCD2 1
2 -DSR1 6 -DSR2 2
3 RXD1 2 RXD2 485- 3
4 -RTS1 7 -RTS2 4
5 TXD1 3 TXD2 485+ 5
6 -CTS1 8 -CTS2 6
7 -DTR1 4 -DTR2 7
8 -RI1 9 -RI2 8
9 Ground1 5 Ground2 9
10 Case Ground Metal Case Case Ground 10
Note: RS232/RS485 on CN5 is selectable via BIOS setup program
G. IDE Hard Disk Connector and Access LED Header (CN7 and J7)
Use the included 44-pin hard disk cable, CN7 can attach up to two 2.5” hard disk drives.
H. AC97 Audio I/O Connector (CN8)
CN8 is a 12-pin 2.0mm IDC connector with AC97 signals for Audio I/O. Use the included Audio
cable and FB4641x adapter board for your Audio applications. The J3, J4, and J5 connectors
on FB4641x are 2-way Line-In, mono Microphone input, and 2-way Line-Out respectively. The
following figure shows these Audio connectors on FB4641x board:
1 2
J7 Pin 1: LED+
Pin 2: LED-
10
CN9 Pin 1: USBV0 Pin 2: Case Ground
Pin 3: USBD0- Pin 4: USBG1
Pin 5: USBD0+ Pin 6: USBD1+
Pin 7: USBG0 Pin 8: USBD1-
Pin 9: Case Ground Pin 10: USBV1
2
9 1
123
JP3 JP3
123
Terminator ON
Terminator OFF
Factor
y
Preset
RS485 Terminator Select Jumper
Pin 1: Ground
Pin 2: +5V
Pin 3: +12V
Note: FB2611 needs +5V only, +12V is not necessary
unless J2 driving a cooling fan.
3
1
J6
Pin 1: Mouse Data
Pin 2: Keyboard Data
Pin 3: Ground
Pin 4: +5V
Pin 5: Mouse Clock
Pin 6: Ke
y
board Clock
1
6
J3
18
CN6
(
Front View
)
CN6 Signals CN6 Signals
1 TPTX+ 5 FBG1
2 TPTX- 6 TPRX-
3 TPRX+ 7 FBG2
4 FBG1 8 FBG2
Line-Out Line-In
Mic-In

Version 1.0 FB2611 Series User’s Quick Setting Page 3/3
www.fabiatech.com ©2006 FabiaTech Corporation
I. CRT and LVDS Connectors (CN1, CN2, and CN4)
The following table and figure illustrate the pin definition of CN1, CN2, CN4 and D-sub 15-pin
on the CRT adapter cable:
J. Cooling Fan Connector (J2)
J2 is 3-pin Molex connector, which is use to drive CPU cooling fan if Non-Low-Power CPUs are
used.
K. PC/104 Connectors (BUS1: 64-pin IDC & 40-pin IDC)
L. SoDIMM Socket (DIMM1)
DIMM1 (on the solder side) supports 144-pin, 3.3V, and PC-133 SDRAM with size of 32MB,
64MB, 128MB, 256MB, and 512MB.
M. External Battery Header and Battery Select Jumper (J1 & JP1)
J1 is used to connect an external battery pack if on-board Lithium battery is empty, and please
setting JP1 properly of on-board battery or external battery.
N. External Speaker Header (J4)
O. CompactFlash Socket and Master/Slave Select (J8 and JP2)
The CompactFlash socket J8 (on the solder side) supports 3.3V CompactFlash and
MicroDrivers. JP2 is used to select master/slave device of this socket.
P. Power/Watchdog LED (LED1)
LED1 is used to indicate as powered-on when it lighted, and watchdog is enabled when it is
blinking. The watchdog will be disabled and LED1 will always lighted after system reset.
End of Document
J1 1
2
On-Board Batter
y
321
External Battery Connector
Pin 1: Battery+
Pin 2: Battery-
Note: 2.6V to 3.6V
Factor
y
Preset
JP1
External Batter
y
Clear CMOS Data
(Open all pins for
about 30 seconds
)
JP1 JP1
3 2 1 3 2 1
J2 3 2
1
Pin 1: Ground
Pin 2: +12V
Pin 3: Fan S
p
eed
Note: It needs to have +12V inputs from J6
power connector if this fan connector
is used.
DB-15
(
Front View
)
1
510
6
11
15
CN4
5
1
Pin 1: +12V
Pin 2: Ground
Pin 3: ENVDD
Pin 4: N.C.
Pin 5: +5V
CN2 Signal CN2 Signal
1 Ground 2 Y0+
3 Y0- 4 Ground
5 Y1+ 6 Y1-
7 Ground 8 Y2+
9 Y2- 10 Ground
11 YCK+ 12 YCK-
13 Ground 14 Z0+
15 Z0- 16 Ground
17 Z1+ 18 Z1-
19 Ground 20 Z2+
21 Z2- 22 Ground
23 ZCK+ 24 ZCK-
25 Ground 26 Ground
27 +3.3V 28 +3.3V
29 +5V 30 +5V
Note: If any trouble when connecting
FB2611x with LCD panels, you could
contact technical support division of
FabiaTech Corporation.
CN1 Signal DB-15 CN1 Signal DB-15
1 RED 1 2 Case Ground Case
3 GREEN 2 4 Digital Ground 5,10
5 BLUE 3 6 Analog Ground 6,7,8
7 VSYNC 14 8 DDC Data 12
9 HSYNC 13 10 DDC Clock 15
1
2
J4 Pin 1: Speaker+
Pin 2: Speaker-
3 2 1
JP2 JP2
321
Master
Slave Factory Preset
1
2 63 64
BUS1-1
–
BUS A & B
2
140 39
BUS1-2
–
BUS C & D