FabiaTech Low Power FB2413 User manual

FabiaTech Corporation
IPC Solution
Website: http://www.fabiatech.com
Email: [e-mail]
PC104 CPU Board
Low Power Series
FB2413 User’s Manual
FEB 2019
Version: 1.0
Part Number: FB2413
i

Copyright
Copyright © 2019 FabiaTech Corporation, The content of this publication may not
be reproduced in any part or as a whole, transcribed, stored in a retrieval system,
translated into any language, or transcribed in any form or by any means,
electronic, mechanical, and magnetic… or otherwise without the prior written
permission of FabiaTech Corporation.
Disclaimer
FabiaTech makes no representation of warranties with respect to the contents of
this publication. In an effort to continuously improve the product and add features,
FabiaTech reserves the right to revise the publication or change specifications
contained in it from time to time without prior notice of any kind from time to time.
FabiaTech shall not be reliable for technical or editorial errors or omissions, which
may occur in this document. FabiaTech shall not be reliable for any indirect,
special, incidental or consequential damages resulting from the furnishing,
performance, or use of this document.
Trademarks
Trademarks, brand names and products names mentioned in this publication are
used for identification purpose only and are the properties of their respective
owners.
Technical Support
If you have problems or difficulties in using the system or setting up the relevant
devices, and software that are not explained in this manual, please contact our
service engineer for service, or send email to sup[email protected].
Returning Your Board for Service & Technical Support
If your board requires servicing, contact the dealer from whom you purchased the
product for service information. You can help assure efficient servicing of your
product by following these guidelines:
A list of your name, address, telephone, facsimile number, or email address
where you may be reached during the day
Description of you peripheral attachments
Description of your software (operating system, version, application
software, etc.) and BIOS configuration
Description of the symptoms (Extract wording any message)
For install drivers, manuals, or product information, please visit us at
www.fabiatech.com
ii

Table of Contents
FB2413 User’s Manual ...........................................................................................................i
Chapter 1 Introducing the FB2413 System................................................................................ 1
Overview..................................................................................................................................1
Layout.......................................................................................................................................2
Specifications..........................................................................................................................4
Packing List ..............................................................................................................................5
Chapter 2 Hardware Installation ............................................................................................... 6
Before Installation ...................................................................................................................6
Hardware Features.................................................................................................................7
J7: Power Connector (4-pin 2.5mm JST)..........................................................8
J6: Reset Header .................................................................................................8
CN1: RJ45 LAN /Adapter Connector with LED indicators ............................9
CN7: Keyboard/Mouse Connector ...............................................................10
J4: External Speaker Header ...........................................................................10
J3 & J5: USB Connector....................................................................................11
LED1 & J2: Power LED indicator, External CF LED Header ..........................11
CN5, CN4, CN3 & CN2: Serial Port Connectors............................................12
CF1: Compact Flash Socket............................................................................13
CN9: Serial ATA hard Disk Connector............................................................13
CN6 & JP1: Battery and Clear CMOS Data..................................................14
BUS1: PC/104 Bus Connectors.........................................................................15
Chapter 3 Installing VGA & LCD Display................................................................................. 17
LVDS LCD FLAT PANEL DISPLAY...........................................................................................17
CN8: Analogy VGA Display Connector ........................................................18
CN10 & CN11: LVDS LCD Connector and Power Connector (Optional)19
Chapter 4 BIOS Setup............................................................................................................... 21
Overview................................................................................................................................21
BIOS Functions ...................................................................................................22
Keyboard Convention .....................................................................................23
Main Setup ............................................................................................................................24
Advanced Setup..................................................................................................................25
iii

Chipset Setup ....................................................................................................26
IDE Configuration..............................................................................................32
Serial Port Configuration ..................................................................................35
USB Configuration .............................................................................................37
Power Manager Configuration ......................................................................39
PCIPnP Setup.........................................................................................................................40
Boot Setup .............................................................................................................................42
Boot Setting Configuration ..............................................................................43
Boot Device .......................................................................................................46
Boot USB Device................................................................................................47
Boot Network Drivers ........................................................................................47
Security setup........................................................................................................................48
Chapter 5 Driver and Utility...................................................................................................... 53
VGA Drivers ...........................................................................................................................53
WINDOWS Driver ...............................................................................................53
LAN Utility & Driver ................................................................................................................54
BIOS Flash Utility.....................................................................................................................54
Watchdog Timer...................................................................................................................55
Watchdog Timer Setting ...........................................................................................55
Setup Watchdog Timer Step - WDT0 and WDT1 ...................................................57
Chapter 6 Technical Reference .............................................................................................. 61
Trouble Shooting for Post Beep and Error Messages.......................................................61
POST BEEP ...........................................................................................................61
Error Message ....................................................................................................61
Technical Reference............................................................................................................64
Physical and Environmental ............................................................................64
Real-Time Clock and Non-Volatile RAM .......................................................64
CMOS RAM Map...............................................................................................66
I/O Port Address Map.......................................................................................67
Interrupt Request Lines (IRQ) ...........................................................................68
Serial Ports ..........................................................................................................69
Appendix................................................................................................................................... 73
Dimension ..............................................................................................................................73
iv

v

FabiaTech Corporation
Chapter1IntroducingtheFB2413System
Overview
The FB2413 is a Vortex86DX3 Low power processor, all in one PC/104 CPU board.
This user’s manual provides information on the physical features, installation, and
BIOS setup.
Built to unleash the total potential of the Vortex86DX3 Processor, the FB2413 is a
single board computer capable of handling today’s demanding requirements.
Able to support 1000 MHz CPU, this unit supports 10/100/1000 interface network
port, on board 512MB DDR3 RAM, four USB2.0 ports, and a VGA controller.
Each FB2413 has four ports for I/O communications. Three RS232 and one RS-232
/RS-422/RS485 ports are available. There are supports watchdog timers that can be
configured from software to automatically reset the system. And for easy
configuration, AMI BIOS are available.
The FB2413 is perfect for POS and POI applications, network systems, panel / MMI’s,
order entry kiosks, test equipment, and OEM projects. The unit is only 90.2x95.9mm,
offering unparalleled performance in a very small footprint.
1

FabiaTech Corporation
Layout
CN6
CN7
CN8
J6
CN10
CN11
CN2 CN3 CN4 CN5J2 CN1
JP1
J4
J1
J3
LED1
CN9
J5
J7 BUS1
U12
CF1
2

FabiaTech Corporation
3

FabiaTech Corporation
Specifications
Vortex86DX3 (1GHz/L1:64K, L2:512K cache) Low Power CPU.
Onboard 512MB DDR3 RAM. (1GB maximum)
One Realtek 8111H 10M/100/1000 Base-TX Ethernet port.
Build-in VGA Controller support VGA port.
Three RS-232 ports and 1 RS232/RS422/RS485 port.
Four USB (V2.0) ports and one SATA interface.
Compact Flash socket for 3.3V Compact Flash and Micro Drives.
PS/2 compatible keyboard and mouse interface.
Providing header for external speaker and hard disk access LED.
Watchdog timer and easy software programmable watchdog timer.
Flash BIOS with easy upgrade utility.
PC/104 form factor, 90.2 mm x 95.9 mm (3.55” x 3.775”)
Power requirement: +5V only, 5.2A maximum. (2.5A Typical)
4

FabiaTech Corporation
PackingList
Upon receiving the package, verify the following things. If any of the mentioned
happens, contact us for immediate service.
•Unpack and inspect the FB2413 package for possible damage that may
occur during the delivery process.
•Verify the accessories in the package according to the packing list and see
if there is anything missing or incorrect package is included.
•If the cable(s) you use to install the FB2413 is not supplied from us, please
make sure the specification of the cable(s) is compatible with the FB2413
system.
Note: After FB2413 is installed, it is recommended that you keep the diskette or
CD that contains drivers and document files, and keep the document
copies, or unused cables in the carton for future use.
The following list the accessories that may be included in your FB2413 package.
Some of the accessories are optional shipped only upon order.
•One FB2413 All-In-One PC/104 CPU board.
•One VGA (Analogy VGA interface) adapter cable.
•Four serial port adapter cables.
•One PS2 keyboard and mouse port adapter cable.
•One 12-pin LAN adapter cable with FB4760 board.
•One compact disc containing manual file in PDF format and necessary
drivers and utilities.
5

FabiaTech Corporation
Chapter2HardwareInstallation
This chapter introduces the system connectors & jumper settings, and guides you to
apply them for field application.
BeforeInstallation
Before you install the system, make sure you follow the below descriptions.
1. Before removing the board from its anti-static bag, wear an anti-static strap to
prevent the generation of Electricity Static Discharge (ESD). The ESD may be
generated by man’s physical touch. It may do damage to the board circuit.
2. Install any connector, module, or add on board, be sure that the power is
disconnected from the system board. If not, this may damage the system
board components, module, or the add-on-board.
3. When you connect the connectors and memory modules, be careful with the
pin orientations.
6

FabiaTech Corporation
HardwareFeatures
The following list is for the setup of the connectors and jumpers of the FB2413.
Item Description
CN1 12-pin header for FB4760 RJ45-Lan adapter
CN4, CN3, CN2 10-pin 2.0mm RS-232 Serial 2, 3, 4 port connector (JST)
CN5 10-pin 2.0mm RS-232/RS422/RS485 Serial 1 port connector (JST)
CN6 2-pin 2.0mm Battery connector
CN7 6-pin for Keyboard and Mouse connector (JST)
CN8 10-pin 2.0mm CRT connector (IDC)
CN9 SATA Connector
CN10 LVDS LCD connector (DF13 30-pin) (Optional)
CN11 Power connector for LCD inverter board (JST 5-pin 2.0mm) (Optional)
CF1 Compact Flash Socket
J1 JTAG Header (Reserved)
J2 2-pin header for CF LED indicator
J3, J5 10-pin USB connector header
J4 2-pin for external speaker header
J6 2-pin Reset header
J7 4-pin Power connector
JP1 Clear CMOS data header (J1*3)
LED1 Power LED indicator
BUS1 PC-104 Connector
7

FabiaTech Corporation
J7: Power Connector (4-pin 2.5mm JST)
CN6
CN7
CN8
J6
CN10
CN11
CN2 CN3 CN4 CN5J2 CN1
JP1
J4
J1
J3
LED1
CN9
J5
J7
4
1
PIN Signal
J7 BUS1
U12
J6: Reset Header
J6 is a 2-pin header for connecting to system reset button. Shorting the circuit of
the 2 pins makes the hardware reset and FB2413 restart system. It is similar to power
off the system and then power it on again.
CN6
CN7
CN8
J6
CN10
CN11
CN2 CN3 CN4 CN5J2 CN1
JP1
J4
J1
J3
LED1
CN9
J5
J7 BUS1
U12
1 VCC (+5V)
2 Ground
3 Ground
4 VDD (+12V)
PIN Signal
1 Reset +
2 Reset -
Note: Be careful with the pin orientation when installing power connector. A wrong
connection can easily destroy your FB2413 board.
+12V is not necessar
y
.
Note: FB2413 needs +5V only,
J6
2
1
8

FabiaTech Corporation
CN1: RJ45 LAN /Adapter Connector with LED indicators
FB4760 is a RJ45 connector with 2 LEDs for LAN. The left side LED (orange) indicates
data which is being accessed and the right side LED (green) indicates on-line status.
(On indicates on-line and Off indicates off-line) CN1 provides twist-pair signals of
LAN port if you got LAN version and adapter board (FB4760) with cable. The
following lists the pin assignments of CN1 to RJ45 connector on the FB4760 LAN
adapter board:
CN6
CN7
CN8
J6
CN10
CN11
CN2 CN3 CN4 CN5J2 CN1
JP1
J4
J1
J3
LED1
CN9
J5
J7 BUS1
U12
RJ45
1 8
(Front View)
The following list the pin assignments of CN1.
CN1 Signal RJ45
CN1 Signal RJ45
1 VDD3.3V - 2 Link/Active -
3 MDI3- 8 4 MDI3+ 7
5 MDI2- 5 6 MDI2+ 4
7 MDI1- 6 8 MDI1+ 3
9 MDI0- 2 10 MDI0+ 1
11 ACT/DUP - 12 Case GND -
9

FabiaTech Corporation
CN7: Keyboard/Mouse Connector
CN7 is a 6-pin 2.0mm JST connector, use the included KB/MS adapter cables you
can attach standard PS/2 type keyboard and mouse.
CN6
CN7
CN8
J6
CN10
CN11
CN2 CN3 CN4 CN5J2 CN1
JP1
J4
J1
J3
LED1
CN9
J5
J7 BUS1
U12
CN7
1
6
PIN Signal
1 Mouse Data
2 Keyboard Data
3 Ground
4 VCC
5 Mouse Clock
6 Keyboard Clock
J4: External Speaker Header
CN6
CN7
CN8
J6
CN10
CN11
CN2 CN3 CN4 CN5J2 CN1
JP1
J4
J1
J3
LED1
CN9
J5
J7 BUS1
U12 PIN Signal
1 Speaker+
2 Speaker-
J4
1
2
10

FabiaTech Corporation
J3 & J5: USB Connector
Use the USB adapter cable, you can attach up to 4 USB devices.
J3 & J5
CN6
CN7
CN8
J6
CN10
CN11
CN2 CN3 CN4 CN5J2 CN1
JP1
J4
J1
J3
LED1
CN9
J5
J7 BUS1
U12 PIN
Description PIN Description
1 USBV0 2 Case Ground
3 USBD0- 4 USBG1
5 USBD0+ 6 USBD1+
7 USBG0 8 USBD1-
9 Case Ground 10 USBV1
LED1 & J2: Power LED indicator, External CF LED Header
CN6
CN7
CN8
J6
CN10
CN11
CN2 CN3 CN4 CN5J2 CN1
JP1
J4
J1
J3
LED1
CN9
J5
J7 BUS1
U12
PIN Signal
1 CF LED+
2 CF LED -
9 10
1
2
2
J2
1
11

FabiaTech Corporation
CN5, CN4, CN3 & CN2: Serial Port Connectors
CN5 (Serial Port1), CN4 (Serial Port2), CN3 (Serial Port3) & CN2 (Serial Port4) are
10-pin 2.0mm IDC connectors. The included serial port adapter cables are used
to transfer 10-pin 2.0mm JST into standard DB-9 connector. The following tables
show the signal connections of these connectors and the included adapter
cable for CN2 to CN5.
CN6
CN7
CN8
J6
CN10
CN11
CN2 CN3 CN4 CN5J2 CN1
JP1
J4
J1
J3
LED1
CN9
J5
J7 BUS1
U12
Function Connector of
Serial Ports Serial Port1
Serial Port 2 Serial Port 3 Serial Port 4
RS232 Signals CN5 CN4 CN3 CN2
Mode Select By BIOS - - -
RS422 CN5 - - -
RS485 CN5 - - -
DB9 CN4/CN3/CN2 RS-232 RS-422 RS-485
1 1 -DCD TX- 485-
6 2 -DSR - -
2 3 RXD TX+ 485+
7 4 -RTS - -
3 5 -TXD RX+ -
8 6 -CTS - -
4 7 -DTR RX- -
9 8 -RI - -
5 9 Ground - -
Metal 10 Case Ground - -
5
1
DB9
CN5/CN4/CN3/CN2
10
9
1
2
6
9
Note: The Serial port 1 (CN5) is designed for multiple proposes. It could be RS-232,
RS-422 or RS-485 by BIOS CMOS setting.
12

FabiaTech Corporation
CF1: Compact Flash Socket
The Compact Flash socket CF1 (on the solder side) and supports 3.3V Compact
Flash and Micro Drives. J
CF1
CN9: Serial ATA hard Disk Connector
This CN9 connector is for SATA hard disk Use the SATA cables to SATA hard disk
drives.
CN6
CN7
CN8
J6
CN10
CN11
CN2 CN3 CN4 CN5J2 CN1
JP1
J4
J1
J3
LED1
CN9
Pin Description
1 Ground
2 TX-DP
3 TX-DN
4 Ground
5 RX-DN
6 RX-DP
7 Ground
J5
J7 BUS1
U12
SATA – Serial ATA connector
13

FabiaTech Corporation
14
CN6 & JP1: Battery and Clear CMOS Data
The CN6 is used to connect an external battery pack if Lithium battery is empty;
please replace the battery with a new one. You can use JP1 to clear CMOS data.
The CMOS store information like system date, time, boot up device, password,
IRQ… that are set up with the BIOS. To clear the CMOS, set JP1 to short 2, 3 closed
by jumper about the 3 sec and then return to 1, 2 close. The default setting is 1, 2
close. (System power must be turned off before you need to use JP1 to clear
CMOS data or replace it with a new one.)
CN6
CN7
CN8
J6
CN10
CN11
CN2 CN3 CN4 CN5J2 CN1
JP1
J4
J1
J3
LED1
CN9
J5
J7 BUS1
U12
JP1
Clear CMOS Data
1
2
3
Normal Operation
Default
1
2
3

FabiaTech Corporation
BUS1: PC/104 Bus Connectors
CN6
CN7
CN8
J6
CN10
CN11
CN2 CN3 CN4 CN5J2 CN1
JP1
J4
J1
J3
LED1
CN9
J5
J7 BUS1
U12
PC/104 A & B Pin
Pin
Signal Pin Signal Pin Signal Pin Signal
A1 -IOCHK A17 SA14 B1 Ground B17 -DACK1
A2 SD7 A18 SA13 B2 RSTDRV B18 DRQ1
A3 SD6 A19 SA12 B3 +5V B19 -Refresh
A4 SD5 A20 SA11 B4 IRQ9 B20 BUSCLK
A5 SD4 A21 SA10 B5 *(-5V) B21 IRQ7
A6 SD3 A22 SA9 B6 DRQ2 B22 IRQ6
A7 SD2 A23 SA8 B7 *(-12V) B23 IRQ5
A8 SD1 A24 SA7 B8 -ZWS B24 IRQ4
A9 SD0 A25 SA6 B9 +12V B25 IRQ3
A10 IORDY A26 SA5 B10 KEY B26 -DACK2
A11 AEN A27 SA4 B11 -SMEMW B27 TC
A12 SA19 A28 SA3 B12 -SMEMR B28 ALE
A13 SA18 A29 SA2 B13 -IOW B29 +5V
A14 SA17 A30 SA1 B14 -IOR B30 OSC
A15 SA16 A31 SA0 B15 -DACK3 B31 Ground
A16 SA15 A32 Ground B16 DRQ3 B32 Ground
PC/104 C& D Pin
Pin
Signal Pin Signal Pin Signal Pin Signal
C1 GND C11 MEMW# D1 Ground D11 -DACK#5
C2 SBHE C12 SD8 D2 MEMCS16# D12 DREQ5
C3 LA23 C13 SD9 D3 IOCS16# D13 DACK#6
C4 LA22 C24 SD10 D4 IRQ10 D14 DREQ6
C5 LA21 C25 SD11 D5 IRQ11 D15 DACK#7
C6 LA20 C26 SD12 D6 IRQ12 D16 DREQ7
C7 LA19 C27 SD13 D7 IRQ15 D17 VCC
C8 LA18 C28 SD14 D8 IRQ14 D18 Master#
C9 LA17 C29 SD15 D9 DACK#0 D19 GND
C10 MEMR# C20 KEY D10 DREQ0 D20 GND
BUS1 – BUS C & D
BUS1 – BUS A & B
15