fantastic furniture ADAPT User manual

Version 1.0
ADAPT
File 3 Drawer
www.fantasticfurniture.com.au

Enjoy
Your purchase from
Australia’s Best Value Furniture Store
www.fantasticfurniture.com.au PAGE 2

Assembly checklist
Useful Information
www.fantasticfurniture.com.au PAGE 3
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! If you are having any difficulties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.

What you need
to assemble the product
Parts list
Box 1: Top Panel (P1);
Left Side Panel (P2);
Right Side Panel (P3);
Bottom Panel (P4);
Back Panel (P5);
2 x Drawer Fronts (P6);
2 x Left Drawer Sides (P7);
2 x Right Drawer Sides (P8);
3 x Drawer Bases (P9);
2 x Drawer Backs (P10);
Drawer Front (P11);
Left Drawer Side (P12);
Right Drawer Side (P13);
Drawer Back (P14);
Support Rail (P15);
www.fantasticfurniture.com.au PAGE 4
Top Panel
(P1)
Left
Side Panel
(P2)
Right
Side Panel
(P3)
Bottom Panel
(P4)
Back Panel
(P5)
Hardware Pack
Addictional Tools Required
Flat head screwdriver;
Phillips head screwdriver;
DO NOT USE
8 x Dowels
(H1)
3 x DR
Runners
(H9)
3 x CL Runner
Tracks
(H6)
2 x Metal
Bars
(H15)
36 x Small
Screws
(H5)
17 x Long
Screws
(H14)
12 x Small
Dowels
(H2)
2 x Front
Wheels
(H10)
2 x Wheels
(H11)
13 x Cam
Bolts
(H3)
1 x Large
Wheel
(H12)
13 x Cam
Nuts
(H4)
20 x Round
Screws
(H13)
3 x CR Runner
Tracks
(H7)
4 x Wedges
(H16)
Left
Drawer Side
(P7)
Left
Drawer Side
(P12)
Drawer Front
(P6)
x 2
Right Drawer
Side (P8)
Right Drawer
Side
(P13)
Drawer Back
(P10)
Drawer Base
(P9)
Drawer Base
(P9)
Drawer Front
(P11)
Drawer Back
(P14)
Support
Rail
(P15)
3 x DL
Runners
(H8)
4 x Screws
(H17)

H6
You will need
Step 1
www.fantasticfurniture.com.au PAGE 5
3 x CL Runner
Tracks (H6)
18 x Small
Screws (H5)
H6
CL
H5
Phillips head
screwdriver
(P3)
H5
H5
H6
H6
H7
H7
H7
H5
H5
H5
H5
H5
H5
H5
H5
H5
H5
H5
H5
H5
H5
H5
H5
H7
CR
H5
3 x CR Runner
Tracks (H7)
You will need
Step 2
4 x Cam Bolts
(H3)
Phillips head
screwdriver
H3
H3
(P1)
H3
H3
Attach 3 x CL Runner Tracks (H6) to Left Side Panel (P2) with 9 x Small Screws (H5).
Attach 3 x CR Runner Tracks (H7) to Right Side Panel (P3) with 9 x Small Screws (H5) as shown.
Attach 4 x Cam Bolts (H3) into Top Panel (P1) as shown.
(P2)

www.fantasticfurniture.com.au PAGE 6
Step 4
You will need
Step 3
(P2)
(P3)
(P2)
(P3)
(P5)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
4 x Cam Nuts
(H4)
Flat head
screwdriver
4 x
Dowels
(H1)
H1
H4
H1
H1
H1
Carefully turn the frame over to an upright position.
Slide Back Panel (P5) in through the grooves of Side Panels (P2, P3) as shown.
Insert 4 x Dowels (H1) into
Side Panels (P2, P3).
Insert 4 x Cam Nuts (H4) into the holes of Side Panels (P2, P3).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push Top Panel (P1)
into place and then tighten the cam nuts using a Flat head screwdriver.

www.fantasticfurniture.com.au PAGE 7
4 x Dowels
(H1)
16 x Round
Screws (H13)
Phillips head
screwdriver
2 x Wheels
(H11)
2 x Front
Wheels (H10)
Phillips head
screwdriver
4 x Long
Screws (H14)
You will need
Step 6
You will need
Step 5
H1
(P2)
(P3)
(P4)
(P4)
H1
H1
H14
H14
H14
H14
Insert 4 x Dowels (H1) into Side Panels (P2, P3).
Attach Bottom Panel (P4) to Side Panels (P2, P3) with 4 x Long Screws (H14).
Tighten screws using a Phillips head screwdriver.
Attach 2 x Front Wheels (H10) and 2 x Wheels (H11) to Bottom Panel (P4)
with 16 x Round Screws (H13) using a Phillips head screwdriver.
H11
H11
H10
H10
H13
H13 H13
H13 H13
H13
H13 H13

2 x Cam Nuts
(H4)
Flat head
screwdriver
4 x Small
Dowels (H2)
You will need
Step 8
Phillips head
screwdriver
H16
H17
(P6)
2 x Cam Bolts
(H3)
Step 9
You will need
H4
H2 H2
H2 H2 H4
(P7)
(P8)
Phillips head
screwdriver
Secure Back Panel (P5) in place with 4 x Wedges (H16) using 4 x Screws (H17).
Tighten Screws using a Phillips head screwdriver.
4 x Wedges
(H16)
4 x Screws
(H17)
www.fantasticfurniture.com.au PAGE 8
You will need
Step 7
Insert 2 x Cam Bolts (H3) into Drawer Front (P6) with a Phillips head screwdriver.
Insert 4 x Small Dowels (H2) into the holes of Drawer Front (P6) as shown
.
Insert 2 x Cam Nuts (H4) into the holes of Drawer Sides (P7, P8).
Rotate the Cam Nuts so the arrows point towards the in-coming Cam Bolts.
Push
Drawer Sides (P7, P8) into place.
Tighten the Cam Nuts using a Flat head screwdriver.
H3
H3
(P6)
(P5)

www.fantasticfurniture.com.au PAGE 9
(P9)
(P7)
(P8)
Step 10
Step 11
You will need
4 x Long
Screws
(H14) Phillips head
screwdriver
H14
H14
Step 12
You will need
1 x DL Runner
(H8)
6 x Small
Screws (H5)
1 x DR Runner
(H9)
Phillips head
screwdriver
(P7)
(P8)
H5
H5
H8
H9
H5
H5
H5
H5
(P10)
Slide Drawer Base (P9) into
the grooves of Drawer Sides (P7, P8).
Attach Drawer Back (P10) to Drawer Sides (P7, P8) with 4 x Long Screws (H14),
make sure that the groove lines up the whole way around the drawer.
Tighten Screws using a Phillips head screwdriver.
Attach 1 x DL Runner (H8) to Left Drawer Side (P7)
and 1 x DR Runner (H9) to Right Drawer Side (P8) with 6 x Small Screws (H5).
Repeat Step 8 to Step 12 to assemble another drawer.
H14
H14

H2
H4
H4
H4
H4
H4
www.fantasticfurniture.com.au PAGE 10
5 x Cam Nuts
(H4)
Flat head
screwdriver
2 x Small
Dowels (H2)
You will need
Step 13
Step 15
Phillips head
screwdriver
5 x Cam Bolts
(H3)
Step 14
You will need
(P11)
H3
H3 H3
H3
H3
(P12)
(P15)
(P13)
(P11)
H2
Slide Drawer Base (P9) into the grooves of Drawer Sides (P12, P13).
Insert 5 x Cam Bolts (H3) into Drawer Front (P11) with a Phillips head screwdriver.
Insert 2 x Small Dowels (H2) into the holes of Drawer Front (P11) as shown .
Insert 5 x Cam Nuts (H4) into the holes of Drawer Sides (P12, P13) and Support Rail (P15).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push
Drawer Sides (P12, P13) and Support Rail (P15) into place and tighten the cam nuts.
(P12)
(P13)
(P9)