fantastic furniture Retro Table D8 User manual

Table D8
fantasticfurniture.com.au
Required
Two People
Version 1.0
Retro

fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
Page 2
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram
for you chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
!Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
!Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
!Never use any glue until you are certain that the parts belong together.
!Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
!If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
!Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au Page 3

fantasticfurniture.com.au
Page 4
What you need
to assemble the product
Othe tools you need
Mallet
Top Panel (P1)
8 x Bolts
(H1)
Part list
1 x Top Panel (P1)
4 x Legs (P2)
Hardware pack
Leg (P2)
Leg (P2) Leg (P2)
Leg (P2)
8 x Spring Washers
(H2)
8 x Flat Washers
(H3)
1 x Allen Key
(H6)
4 x Dowels
(H5)
4 x Felt Pads
(H4)

Step 1
Page 5fantasticfurniture.com.au
You will need
Stick 4 x felt pads (H4) onto the bottom of the 4 x legs (P2)
by removing the adhesive backings and pressing down firmly.
Insert 4 x dowels (H5) into the 4 x legs (P2). Gently tap into place with a mallet if necessary.
Step 2
You will need
8 x Bolts
(H1)
Attach the 4 x legs (P2) to top panel (P1) using 8 x bolts (H1), 8 x spring washers (H2)
and 8 x flat washers (H3). Completely tighten using allen key (H6).
X4
8 x Flat
Washers (H3)
8 x Spring
Washers (H2)
1 x Allen Key
(H6)
4 x Dowels
(H5)
4 x Felt Pads
(H4)
Mallet
H5
(P2)
H4
H2
H6
H3
(P2)
(P1)
(P2)
H1
(P1)
(P2)
(P2)
(P2)
(P2)
(P1)
Note: We recommend assembling
the table on a soft surface to
minimise the risk of damaging the
table top.

Step 3
Page 6fantasticfurniture.com.au
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.
Required
Two People
With assistance, carefully turn the table upright.