fantastic furniture Montana Queen Bed User manual

Version 1.0
Montana
fantasticfurniture.com.au
Queen Bed/King Bed

fantasticfurniture.com.au Page 2Page 2
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!

Assembly checklist
Useful information
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.
Page 3
fantasticfurniture.com.au

What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Headboard
(P1) Side Rail
(P6)
Side Rail
(P6) Footboard
(P2)
Centre Rail
(P7)
Support leg
(P8) Support leg
(P8)
Leg(P3)
Headboard and Footboard
Timber Cross Rail
(P5)
Footboard Leg
(P4)
Leg(P3)
Headboard and Footboard
Support Wood
Footboard (P2) ; Headboard and Footboard Legs (P3) ; Footboard Leg Support
Headboard (P1) ; Slats (P11)
Parts list
Box 1 :
Box 2 :
Woods (P4) ; Timber Cross Rail (P5) ; Side Rails (P6) ; Center Rail (P7) ; Support
Legs (P8) ; End Connectors (P9) ; Centre Connectors (P10) ; Hardware Pack.
28 x End Connectors (P9) 14 x Centre Connectors (P10)
28 x Slats (P11)
Hardware pack
(Bolt)
8 x M8 x 16mm
(H1)
1 x M5 (Allen Key)
(H2)
(Bolt)
14 x M8 x 20mm
(H3)
(Washer)
20 x M8 x 19mm
(H4)
(Screw)
6 x M4 x 38mm
(H5)
(Felt Pad)
1 x 40 x 20mm
(H6)
(Bolt)
6 x M8 x 55mm
(H7)
(Spring Washer)
10 x M8
(H8)
fantasticfurniture.com.au Page 4

You will need
6 x Bolts 55mm
(H7)
6 x Washers M8
(H4)
Allen Key
(H2)
6 x Spring Washer
(H8)
4 x Screws 38mm
(H5)
Phillips head
Screwdriver
(not provided)
(P2)
(P2)
(P4) (P4) (P4)
(H4)
(H8)
(H7)
(H2) (H5)
Step 1
Step 2
Attention:
Do not screw hardware from this side. Screw hardware from this side.
Attach the footboard leg support woods (P4) to the footboard (P2) with 6 x bolts 55mm (H7),
4 x Screws 38mm (H5) by phillips head screwdriver (not provided).
6 x washers (H4) and 6 x spring washers (H8) by using allen key (H2). Then screw the
You will need
8 x Washers M8
(H4)
8 x Bolts 20mm
(H3) Allen Key
(H2)
(P1)
(P3)
(H4)
(H3)
(H2)
(P2)
(P4)
(P3)
(H4)
(H3)
(H2)
Attach legs (P3) to the bottom of headboard (P1) and footboard leg support
wood (P4) with 8 x bolts 20mm (H3) and 8 x washers (H4) by using allen key (H2).
fantasticfurniture.com.au Page 5
Large hole
Small hole

Step 3
You will need
8 x Bolts 16mm
(H1) (H2)
Allen Key
(P1)
(P6)
(P6)
(P2)
(H1)
(H2)
Install the bolts (H1) to the brackets by using allen key (H2) as shown, do not tighten the
bolts and keep them 8mm loose. Then attach side rails (P6) to headboard (P1) and
footboard (P2) by slotting the bracket on the side rails (P6) over the bolt as shown.
No need to tighten bolts until step 7.
fantasticfurniture.com.au Page 6

(H3)
You will need
Step 4
2 x Washers M8
(H4)
(H2)
2 x Bolts 20mm
(H3) (H2)
Allen Key
(H4)
(P7)
(P8)
Attach the support legs (P8) to the centre rail (P7) with 2 x bolts (H3) and 2 x washers (H4)
by using allen key (H2).
fantasticfurniture.com.au Page 7
(H4)
4 x
(H8)
Spring Washer
You will need
4 x Washers M8
(H4)
4 x Bolts 20mm
(H3) (H2)
Allen Key
Step 5
(H8)
(H3)
(H2)
(P7)
(P1)
(P7)
(P6)
(P6)
(P2)
Adjust to be 10mm gap from floor
to the bottom of support legs.
Slot the centre rail (P7) into the headboard (P1) and footboard (P2).
Rotate 4 x bolts (H3) and 4 x washers (H4) and 4 x spring washers (H8) to the headboard (P1)
and footboard (P2) by using allen key(H2). No need to tighten bolts until step 7.

You will need
28 x End
Connectors
(P9)
14 x Centre
Connectors
(P10)
28 x Slats
(P11)
Step 6
1
(P9) (P10) (P9)
Push 2 end connectors (P9), 2 pcs slats (P11)
and a centre connector (P10) together.
2
3
Insert the full slat into the side rail and centre rail one by one.
fantasticfurniture.com.au Page 8
Sometimes it make it easier to line up the
hole if you press down in the middle of the
slat to flatten it out.

4
Repeat for every bed slat until finished.
fantasticfurniture.com.au Page 9
Step 7
You will need
2 x Screws 38mm
(H5)
Phillips head
Screwdriver
(not provided)
(H2)
Allen Key Felt Pad
1 x 40 x 20mm
(H6) (P1)
(P6) (P2)
(H2)
(H5)
(P5)
(P5)
(H6)
(P7)
Make sure
screw is tighten.
Make sure the inner space is square.
Attach the felt pad (H6) to the centre of centre rail (P7).
Then attach the timber cross rail (P5) to the centre of sie rails (P6) by using 2 x screws (H5).
Now tighten all the bolts on the corner bracket and tighten bolts on the headboard (P1)
and footboard (P2).

Step 8
fantasticfurniture.com.au Page 10
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.