fantastic furniture Hamilton Queen bed User manual

Version 1.0
Hamilton
Queen bed
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Bedhead (P1);
Bedfoot (P2);
2 x Side Rails (P3);
Centre Rail (P4);
3 x Support Legs (P5);
11 x Article bed boards (P6);
2 x Article bed boards (P7):
Hardware pack
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Page 4
DO NOT USE
fantasticfurniture.com.au
Side Rail
(P3)
Side Rail
(P3)
Article bed
board
(P7)
Article bed
board
(P6)
Bedhead
(P1)
Bedfoot
(P2)
Centre Rail
(P4)
Support
Leg
(P5) Support
Leg
(P5)
Support
Leg
(P5)
42 x Screws
(H1)
2 x Hexagonal
Nuts
(H4)
5 x Washers
(H6)
1 x Allen Key
(H10)
5 x Long Bolts
(H3)
4 x Bolts
(H2)
3 x Adjustable
(H5)
16 x Screws
(H11)
4 x Elbow
Connectors
(H8)
4 x Flat
Connectors
(H9)
12 x Bolts
(H7) 1 x Spanner
(H12)

You will need
Step 1
Step 2
You will need
Attach 4 x Flat Connectors (H9) to Bedfoot (P2) with 8 x Screws (H1) by tightening
with the Phillips Head Screwdriver.
(P1)
(P2)
Phillips head
screwdriver
fantasticfurniture.com.au Page 5
Attach 2 x Flat Connectors (H9) to Bedhead (P1) with 8 x Screws (H1) by tightening with
the Phillips Head Screwdriver.
8 x Screws
(H1)
2 x Flat
Connectors (H9) H1
H1
H9
H9
H1
H9
H1
H9
Phillips head
screwdriver
8 x Screws
(H1)
2 x Flat
Connectors (H9)

(P3)
(P3)
(P3)
x2
You will need
Step 3
(P2)
Attach 4 x Elbow Connectors (H8) to Side Panels (P3 x 2) with 16 x Screws (H11) by tightening
with the Phillips Head Screwdriver.
You will need
Step 4
Attach Side Panels (P3 x 2) to Bedfoot (P2) with 6 x Bolts (H7) by tightening
with 1 x Allen Key (H10).
Phillips head
screwdriver
fantasticfurniture.com.au Page 6
Required
Two People
H11
H8
H10
H7
16 x Screws
(H11)
4 x Elbow
Connectors (H8)
H11
H8
1 x Allen Key
(H10)
6 x Bolts
(H7)

(P3)
(P3)
(P1)
(P5)
(P5)
(P5)
(P4)
Attach Support Legs (P5 x 3) to Centre Rail (P4) with 3 x Washers (H6) and 3 x Long Bolts (H3)
using Phillips Head Screwdriver. Insert the 3 x Adjustable (H5) into the Support Legs (P5 x 3) .
fantasticfurniture.com.au Page 7
Required
Two People
You will need
Step 5
Attach Side Panels (P3 x 2) to Bedhead (P1) with 6 x Bolts (H7) by tightening with 1 x
Allen Key (H10).
You will need
Step 6
1 x Allen Key
(H10)
6 x Bolts
(H7)
H10
H7
3 x Long Bolts
(H3)
3 x Adjustable
(H5)
3 x Washers
(H6)
H5
H5
H5
H3
H6
H3
H6
H3
H6
Phillips head
screwdriver

(P4)
You will need
Step 7
fantasticfurniture.com.au Page 8
4 x Bolts
(H2)
(P1)
(P2)
(P2)
(P1)
H2
H2
You will need
Step 8
4 x Screws
(H1)
Phillips head
screwdriver
H6
H4
2 x Hexagonal
Nuts (H4)
Attach Article Bed Boards (P7x2) to Centre Rail (P4)
with 2 x Washers (H6), 2 x Long Bolts (H3) and 2 x
Hexagonal Nuts (H4) using Spanner (H12) and Phillips Head Screwdriver. Then screw
Article Bed Boards (P7x2) with 4 x Screws (H1). Move the bed in proper position
after adjusting the foot 5mm upwards. Once the bed is in correct position , please
rotate and adjust foot to the floor level.
Attach Centre Rail (P4) to Bedhead (P1) and
Bedfoot (P2) screw with 4 x Bolts (H2). Tighten
with a Phillips Head Screwdriver.
2 x Washers
(H6)
H3
2 x Long Bolts
(H3)
(P4)
(P7)
(P7)
(P3)
(P3)
H1
H1
H1
H12
H1
H3
H6
H4
H4
H3
H6
Phillips head
screwdriver
1 x Spanner
(H12)

You will need
Step 9
fantasticfurniture.com.au Page 9
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
(P3)
(P3)
Attach Article Bed Boards (P6 x 11) to Side Rails (P3 x 2) with 22 x Screws (H1). Tighten
with a Phillips head screwdriver.
Phillips head
screwdriver
22 x Screws
(H1)
H1
H1

Assembly Instructions
BEDSIDE 2 DRW
VER 1.1
HAYMAN

Page 3
What You Need
To Assemble The Body
Top Panel
(P1)
Right Side
Panel
(P3)
Left
Drawer Side
(P8)
Drawer Front
(P7)
Right
Drawer Side
(P9)
x 2
Drawer Back
(P11)
Drawer Base
(P10)
Left Side
Panel
(P2)
Rail
(P12)
Rail
(P4)
Rail
(P5)
Back Panel
(P6)
(Tools not provided)
Flat BladeScrewdriver
Phillips Head Screwdriver
Mallet
8 x Medium Screws
(H2)
8 x Dowels
(H1)
20 x Small
Screws
(H5)
2 x
Bolts
(H11)
2 x CL Runner
Tracks
(H6)
20 x Cam Bolts
(H3)
20 x Cam Nuts
(H4)
2 x CR Runner
Tracks
(H7)
2 x DL Runners
(H8)
2 x DR Runners
(H9)
Please make sure you have all these parts before you start.
2 x Long Screws
(H14)
2 x Handles
(H10)
4 x Wedges
(H12)
4 x Screws
(H13)

Page 4
Step 1
You will need:
Step 2
You will need:
2 x CL Runner
Tracks
(H6)
2 x CR Runner
Tracks
(H7)
4 x
Cam Bolts
(H3)
4 x
Dowels
(H1)
4 x Cam Bolts
(H3)
6 x Small
Screws
(H5)
6 x Small
Screws
(H5)
(P2)
Attach 2 x CL Runner Tracks (H6) to Left Side Panel (P2) with 6 x Small Screws (H5).
Insert 4 x Dowels (H1) into Left Side Panel (P2).
Attach 4 x Cam Bolts (H3) to Left Side Panel (P2) as shown.
Attach 2 x CR Runner Track (H7) to Right Side Panel (P3) with 6 x Small Screws (H5).
Attach 4 x Cam Bolts (H3) to Right Side Panel (P3) as shown.
H6
CL
H5
H7
CR
H5
H5
H3
H1
H1
H5
H6
H5
H5
H5
H6
H5
H3 H3
H3
H5
H5
H7
H7
(P3)
H5
H3
H3 H3
H3
H5 H5
H5
H1 H1

Page 5
(P2)
(P12) (P4)
(P5)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Step 3
Insert 4 x Cam Nuts (H4) into the holes of
Rails (P4, P5) and (P12).
Rotate the cam nuts so
the arrows point towards the incoming cam bolts.
Push Rails (P4, P5) and (P12) into place and tighten the cam nuts.
Make sure the side with bigger holes
is facing to Rail (P4).
You will need:
4 x Cam Nuts
(H4)
Step 4
(P12)
(P4) (P5)
Insert 4 x Dowels (H1) into Rails (P4,P12).
Insert 4 x Cam Nuts (H4) into the holes of Rails (P4,P5) and (P12).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push Right Side Panel (P3) into place and tighten the cam nuts.
You will need:
4 x Cam Nuts
(H4)
H4
(P2)
(P3)
4 x Dowels
(H1)
H4
H1 H1
H1 H1 H4
H4H4
H4
H4
H4

(P1)
(P2)
(P1)
(P3)
You will need:
4 x Cam Bolts
(H3)
H3
H3
H3
H3
Step 6
You will need:
Insert 4 x Cam Nuts (H4) into the holes of Side Panels (P2) and (P3).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Top Panel (P1) and tighten the cam nuts.
4 x Cam Nuts
(H4)
H4 H4 H4
H4
Page 6
Step 5
(P6)
Slide Back Panel (P6) into the groove of
Left Side Panel (P2) and Right Side Panel (P3).
Attach 4 x Cam Bolts (H3) into Top Panel (P1) as shown.
(P2)
(P3)

H14
H14
Attach Rail (P12) to Top panel (P1) with 2 x Long Screws (H14).
Page 7
You will need:
4 x Wedges
(H12)
4 x Screws
(H13)
Step 8
Step 7
You will need:
2 x Screws
(H14)
Secure Back Panel (P6) in place with 4 x Wedges (H12) using 4 x Screws (H13).
(P1)
(P12)
Make sure Wedge (H12)
is facing to the bottom of
Top Panel (P1) as shown.
H12
H13

H3
H4
H4
Page 8
Step 9
You will need:
4 x Cam Bolts
(H3)
Step 11
You will need:
(P7)
(P7)
(P8)
(P9)
Attach 4 x Small Cam Bolts (H3) to Drawer Front (P7).
4 x Cam Nuts
(H4)
Insert 4 x Cam Nuts (H4) into the holes of Drawer Sides (P8) and (P9).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push
Drawer Sides (P8) and (P9) into place and tighten the cam nuts.
H3
H3
H3
H4
H4
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Step 10
You will need:
1 x DR Runner
(H9)
1 x DL Runner
(H8)
4 x Small
Screws
(H5)
(P8) (P9)
Attach 1 x DL Runner (H8) to Left Drawer Side (P8) and 1 x DR Runner (H9) to
Right Drawer Side (P9) with 4 x Small Screws (H5).
H8
H5
H9
H5
H5
H5

H2
Page 9
Step 13
You will need:
4 x Medium
Screws
(H2)
Step 12
(P7)
(P10)
(P10)
(P11)
(P7)
(P8)
(P8)
(P9)
(P9)
Slide Drawer Base (P10) into the groove
in Drawer Sides (P8) and (P9).
H2
H2
H2
H10
H11
Attach Drawer Back (P11) to Drawer Sides (P8) and (P9) with 4 x Medium Screws (H2),
make sure that the groove lines up the whole way around the drawer.
Step 14
You will need:
1 x Handle
(H10)
1 x Bolt
(H11)
Attach 1 x Handle (H10) to Drawer Front (P7) with 1 x Bolt (H11).

Page 10
Step 15
The job is now complete!
In the interest of our environment
Please dispose of all packaging thoughtfully.
Please make sure your bedside is sitting squarely on the floor,then tighten
all the screws and bolts – being careful not to over tighten
Repeat Step 9 to Step 14 to assemble the other drawer.
Then put the drawers into the chest.

HAYMAN
Dresser 6 Drawer
www.fantasticfurniture.com.au
Version 1.0