fantastic furniture Toto Lowline 1200mm User manual

Toto
Lowline 1200mm
fantasticfurniture.com.au
Version 1.0

fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Recommended weight capacity : 40kgs.
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
Page 2

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Top Panel
(P1)
Right Side
Panel
(P3)
Left Side
Panel
(P2)
Adjustable
Shelf
(P5)
Divider
(P4)
Rail
(P10)
Leg
(P11)
Leg
(P11)
Door
(P7)
Back Panel
(P8)
Back
Panel
(P9)
Bottom Panel
(P6)
12 x Dowels
(H1)
16 x Long Screws
(H2)
5 x Small
Screws
(H5)
6 x Cam Bolts
(H3)
6 x Cam Nuts
(H4)
Parts list
Top Panel (P1);
Left Side Panel (P2);
Right Side Panel (P3);
Divider (P4);
Adjustable Shelf (P5);
Bottom Panel (P6);
Door (P7);
Back Panel (P8);
Back Panel (P9);
2 x Rails (P10);
2 x Legs (P11);
Hardware Pack
1 x Magnetic Bar
(H7)
2 x Door Hinges
(H6)
1 x Magnetic
(H8)
2 x Medium
Screws
(H9)
4 x Cam Bolts
(H12)
4 x Cam Nuts
(H13)
4 x Shelf Pins
(H14)
8 x Wedges
(H10)
8 x Small Thin
Screws
(H11)
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Flat head screwdriver
DO NOT USE
Page 4
fantasticfurniture.com.au

You will need
Step 2
5 x Small
Screws (H5)
2 x Door
Hinges (H6)
Phillips head
screwdriver
Step 1
6 x Dowels
(H1)
You will need
Phillips head
screwdriver
H1
H2
H2
H2
H2
H2
H2
(P8)
(P9)
(P7)
(P7)
(P4)
(P4)
(P6)
(P6)
(P2)
(P2)
(P3)
(P3)
H5
H6
H6
H7
H5
H5
H1
H1
Insert 6 x Dowels (H1) into the holes of Side Panels (P2, P3) and Divider (P4).
Attach Divider (P4) and Side Panels (P2,P3) to Bottom Panel (P6) with 6 x Long Screws (H2).
Attach 2 x Door Hinges (H6) and 1 x Magnetic Bar (H7) to Door (P7)
with 5 x Small Screws (H5).
6 x Long
Screws (H2)
1 x Magnetic
Bar (H7)
Step 3
Put Door (P7) into place, make sure
the bottom of Door Hinge is in the hole of Bottom Panel (P6).
Put Back Panels (P8, P9) into the groove of Side Panels (P2, P3) and Divider (P4).
Back panel slot on bottom
Page 5
fantasticfurniture.com.au

(P2)
(P3)
(P4)
(P1)
H4
H4
(P1)
H3
H3
H3
H3
H3
H3
6 x Cam Nuts
(H4)
You will need
Step 5
6 x Dowels
(H1) H1
H1
H4
2 x Medium
Screws (H9)
Step 4
1 x Magnetic
(H8)
You will need
6 x Cam Bolts
(H3)
Phillips head
screwdriver
H9
H8
Attach 6 x Cam Bolts (H3) into Top Panel (P1).
Attach 1 x Magnetic (H8) to Top Panel (P1) with 2 x Medium Screws (H9).
Insert 6 x Dowels (H1) into
Side Panels (P2, P3) and
Divider (P4). Insert 6 x Cam Nuts
(H4) into the holes of Side Panels
(P2, P3) and Divider (P4). Rotate the cam nuts so the arrows point towards the incoming
cam bolts. Attach Top Panel (P1) and tighten the cam nuts.
(P9)
(P8)
Phillips head
screwdriver
8 x Wedges
(H10)
8 x Small Thin
Screws (H11)
H10
H11
Secure Back Panels (P8, P9) in place with 8 x Wedges (H10)
using 8 x Small Thin Screws (H11).
Page 6
fantasticfurniture.com.au
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
You will need
Step 6
Phillips head
screwdriver

(P10)
(P10)
(P10)
(P11)
(P11)
(P11)
(P11)
(P6)
You will need
Step 7
Step 8
You will need
10 x Long
Screws (H2)
4 x Cam Bolts
(H12)
4 x Cam Nuts
(H13)
Phillips head
screwdriver
Flat head
screwdriver
Phillips head
screwdriver
H12
H12
H12
H13
H12
H12
H13
H13
H2
H2
H2
H2
H2
H2
H2
H2
H2
Push 4 x Cam Bolts (H12) through Legs (P11) and attach with Rails (P10)
with 4 x Cam Nuts (H13) using a Flat head screwdriver. Tighten with Phillips head
screwdriver.
Attach Legs (P11) and Rails (P10) to Bottom Panel (P6) with 10 x Long Screws (H2).
Make sure the side with
bigger holes is facing up.
Ĝ
h
Page 7
fantasticfurniture.com.au

(P5)
(P2)
(P4)
You will need
Step 9
Step 10
4 x Shelf Pins
(H12)
H12
H12
Insert 4 x Shelf Pins (H12) into the holes of Side Panels (P2, P4) as shown.
Insert Adjustable Shelf (P5) into place.
Page 8
fantasticfurniture.com.au
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.