fantastic furniture Pod Tallboy User manual

Version 1.0
Pod
Tallboy 5 Drw
fantasticfurniture.com.au

fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY.
To avoid any serious or fatal injury, this product has been supplied
with a wall strap to prevent toppling. We strongly recommend that
this product is permanently fixed to the wall or other suitable sur-
face. Connecting attachments for your wall are not included since
dierent surface materials require dierent attachments. Please seek
professional advice if you are in doubt of what wall connections to
use.
Recommended weight capacity : 10kgs / Drawer.
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
Page 2

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Top Panel (P1);
Bottom Panel (P2)
Left Side Panel (P3);
Right Side Panel (P4);
2 x Back Panels (P5);
2 x Rails (P6);
2 x Rails (P7);
Rail (P8);
4 x Legs (P9);
5 x Drawer Fronts (P10)
5 x Left Drawer Sides (P11);
5 x Right Drawer Sides (P12);
5 x Drawer Bases (P13);
5 x Drawer Backs (P14);
Hardware pack
Left Drawer
Side (P11)
Right Drawer
Side (P12)
Drawer Back
(P14)
Drawer
Base (P13)
Drawer
Front (P10)
Top Panel
(P1)
Right Side
Panel
(P4)
Left Side
Panel
(P3)
Bottom
Panel (P2)
Back Panel
(P5)
Back Panel
(P5)
Rail
(P6)
Rail
(P6)
Rail
(P7)
Rail
(P7)
Rail
(P8)
Leg
(P9)
x5
x4
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Page 4
fantasticfurniture.com.au
DO NOT USE
32 x Cam
Bolts
(H3)
32 x Cam
Nuts
(H4)
20x Dowels
(H1)
50 x Small
Screws
(H5)
5 x CL Runner
Tracks
(H6)
5 x CR Runner
Tracks
(H7)
5 x DR Runners
(H9)
5 x Handle
Screws
(H11)
5 x Handles
(H10)
5 x DL Runners
(H8)
24 x Long
Screws
(H2)
2 x Washers
(H17)
4 x Leg
Plates
(H12)
16 x Bolts
(H14)
8 x Wedges
(H15)
8 x Wedge
Screws
(H16)
1 x Allen Key
(H18)
4 x Plastic
Glide
(H19)
8 x Long
Bolts
(H13)

30 x Small
Screws (H5)
(P1)
(P4)
(P3)
You will need
Step 1
H7
CR
H5
Step 2
You will need
Phillips Head
Screwdriver
4 x Cam Bolts
(H3)
Attach 4 x Cam Bolts (H3) to Top Panel (P1) by tightening with the Phillips Head Screwdriver.
Attach 5 x CL Runner Tracks (H6) and 5 x CR Runner Tracks (H7) to Left & Right Side
Panels (P3 & P4) with 30 x Small Screws (H5) by tightening with the Phillips Head
Screwdriver.
fantasticfurniture.com.au Page 5
5 x CL Runner
Tracks (H6)
H6
CL
H5
5 x CR Runner
Tracks (H7)
Phillips Head
Screwdriver
H3
H3
H3
H3
H7
H5
H5 H6
H5 H6
H5 H6
H5 H6
H5 H6
H7
H5
H7
H5
H7
H5
H7
H5

You will need
Step 3
Step 4
You will need
Attach 8 x Cam Bolts (H3) to Left & Right Side Panel (P3 & P4) by tightening with the Phillips
Head Screwdriver.
Insert 4 x Cam Nuts (H4) into Rails (P8 & P6 x 2 ) .
Insert 6 x Dowels (H1) into Rails (P6 x 2 & P7 x 2) as shown.
Rotate the cam nuts so the arrows point towards the incoming
cam bolts. Attach Rails (P6 x 2 & P7 x 2 & P8) to Left Side
Panel (P3) by tightening all cam nuts with the Phillips Head Screwdriver.
Phillips Head
Screwdriver
4 x Cam Nuts
(H4)
Phillips Head
Screwdriver
6 x Dowels
(H1)
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
(P4)
(P6)
(P6)
(P8)
(P7)
(P7)
(P3)
(P3)
fantasticfurniture.com.au
fantasticfurniture.com.au Page 6
8 x Cam Bolts
(H3)
H3
H3
H3
H3
H3
H3
H1
H4
H4
H1
H1
H1
H4

Insert 4 x Cam Nuts (H4) into
Rails (P8 & P6 x 2 ). Insert 6 x Dowels (H1)
into Rails (P6 x 2 & P7 x 2) as shown.
Rotate the cam nuts so the arrows point
towards the incoming cam bolts. Attach Right
Side Panel (P4) to Rails (P6 x 2 & P7 x 2 & P8)
by tightening all cam nuts with the Phillips Head Screwdriver.
Step 6
Step 5
You will need
4 x Cam Nuts
(H4)
Phillips Head
Screwdriver
6 x Dowels
(H1)
Slide Back Panel (P5) into the grooves of Left & Right Side Panels (P3 & P4).
(P4)
(P6)
(P6)
(P8)
(P7)
(P7)
(P3)
(P5)
(P4)
fantasticfurniture.com.au Page 7
H1
H1
H1
H1
H4
H4
H4

Insert 4 x Dowels (H1) into
Left & Right Side Panel (P3 & P4).
Attach Bottom Panel (P2) to
Left & Right Side Panel (P3 & P4)
with 4 x Long Screws (H2) by tightening
with the Phillips Head Screwdriver.
(P4)
(P3)
(P2)
fantasticfurniture.com.au Page 8
H2
You will need
Phillips Head
Screwdriver
Step 7
4 x Dowels
(H1)
4 x Long
Screws (H2)
(P4)
(P2)
(P9)
(P9)
(P9)
(P9)
(P3)
Ensure the countersunk
holes on the Leg Plate are
facing up, so that the Screws
sit flush with the top of
the Leg Plate once attached.
(P9)
H12
H14
H18
H14
H14
H14
H14 H13
You will need
Step 8
Phillips Head
Screwdriver
4 x Leg
Plates (H12)
16 x Bolts
(H14)
1 x Allen Key
(H18)
4 x Plastic
Glide (H19)
Hammer
H19
H19
H19
H19
H19
Secure 4 x leg plates (H12) to 4 x legs (P9) with 8 x Long Bolts (H13) by tightening with an
Allen Key (H18). Attach 4 x legs (P9) to bottom panel (P2) with 16 x bolts (H14) by
tightening with an Allen Key (H18). Hammer 4 x plastic glides (H19) onto the
bottom of legs (P9).
8 x Long Bolts
(H13)
H18
H2
H2
H1
H2
H2
H1
H1

Insert 4 x Dowels (H1) into
Left & Right Side Panel (P3 & P4).
Insert 4 x Cam Nuts (H4) into
Left & Right Side Panel (P3 & P4).
Rotate the nuts so the arrows point
towards the incoming bolts. Attach Top Panel (P1) to Left & Right Side Panel (P3 & P4)
by tightening all nuts with the Phillips Head Screwdriver.
Gently stand the unit upright. Slide Back Panels (P5) into the grooves of Left & Right
Side Panel (P3 & P4).
(P4)
(P4)
(P5)
(P1)
(P3)
(P3)
fantasticfurniture.com.au Page 9
Step 9
4 x Dowels
(H1)
4 x Cam Nuts
(H4)
You will need
Step 10
Phillips Head
Screwdriver
H1
H1
H4
H4
H1
H4

Attach 20 x Cam Bolts (H3) to Drawer Front (P10 x 5) by tightening with the Phillips Head
Screwdriver.
Insert 20 x Cam Nuts (H4) into Left & Right Drawer Side (P11 x 5 & P12 x 5) as shown. Rotate
the cam nuts so the arrows point towards the incoming cam bolts. Attach Drawer Front (P10 x 5)
to Left & Right Drawer Side (P11 x 5 & P12 x 5) by tightening all cam nuts with the Phillips Head
Screwdriver.
You will need
Step 11
You will need
Step 12
Phillips Head
Screwdriver
Phillips Head
Screwdriver
20 x Cam Bolts
(H3)
fantasticfurniture.com.au Page 10
20 x Cam Nuts
(H4)
(P10)
(P11)
(P12)
x5
H4
H4
H4 H4
(P10)
x5
H3 H3
H3 H3

Slide the Drawer Bases (P13 x 5) into the grooves of Left & Right Drawer
Sides (P11 x 5 & P12 x 5) as shown.
(P11)
(P14)
(P12)
x5
H2
H2
H2 H2
fantasticfurniture.com.au Page 11
Step 13
(P11)
(P12)
(P13)
x5
You will need
Step 14
Phillips Head
Screwdriver
20 x Long
Screws (H2)
Attach drawer back (P14 x 5) to left & right drawer side (P11 x 5 & P12 x 5) with 20 x long
screws (H2) by tightening with the phillips head screwdriver. Before securing,
ensure the bottom panel lines up with the grooves the whole way around the drawer.

Attach 5 x Handles (H10) to Drawer Front (P10 x 5) with 5 x Handle Screws (H11) by tightening
with the Phillips Head Screwdriver.
Attach 5 x DL Runners (H8) to the bottom of Left Drawer Side (P11 x 5) and 5 x DR Runner (H9)
to the bottom of Right Drawer Side (P12 x 5) with 20 x Small Screws (H5) by tightening with the
Phillips Head Screwdriver.
You will need
Step 15
20 x Small
Screws (H5)
Phillips Head
Screwdriver
5 x DR
Runners (H9)
5 x DL
Runners (H8)
You will need
Step 16
Phillips Head
Screwdriver
fantasticfurniture.com.au Page 12
5 x Handle
Screws (H11)
5 x Handles
(H10)
(P11)
(P12)
x5
H5
H8
H5
H5
H5 H9
(P10) x5
H10
H11

H15
H16
Secure Back Panels (P5 x 2) in place with 8 x Wedges (H15) using 8 x Wedge Screws (H16)
by tightening with the Phillips Head Screwdriver.
Step 17
You will need
Step 18
Phillips Head
Screwdriver
8 x Wedges
(H15)
8 x Wedge
Screws (H16)
(P1)
(P5)
(P5)
fantasticfurniture.com.au Page 13
Insert the assembled drawers into the corresponding compartments as shown.
Ensure the drawers slide easily along the rails.

Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
You will need
Step 19
Phillips Head
Screwdriver
2 x Washers
(H17)
Screw and Wall Plug
are not provided.
Please use appropriate
fixtures for your wall.
Seek advice from a qualified
trades person on how to
attach this safety strap to
your specific wall.
wall
Screw
H17
Move the unit to the final position, and attach the safety strap to the wall securely.
Make sure it is firmly attached and snug fit.
fantasticfurniture.com.au Page 14