fantastic furniture BUSSY BUNK BED MK 2 User manual

BUSSY
BUNK BED MK 2
Version 1.1
www.fantasticfurniture.com.au

PAGE 2www.fantasticfurniture.com.au
Enjoy
Your purchase from
Australia’s Best Value Furniture Store
HELPFUL BUNK BED SAFETY TIPS
Bunk beds should be checked periodically to ensure that the guardrail,ladder and other
components are secure and in the correct position and all connectors are tight.
We recommend that children under the age of nine (9) do not use the upper bunk.
Children should be discouraged from playing on the bunk bed.
No more than one person should use the upper bunk at any time (unless otherwise stated).
Bunk beds should be placed a minimum of 2 metres away from any ceiling fans to
prevent any injury to the upper bunk occupant.

Read through the instructions carefully
before you begin.
Assembly checklist
Identify and lay out all of the components
before you begin assembly.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
!Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
!Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
!Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
!If you are having any difficulties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
PAGE 3www.fantasticfurniture.com.au
through theinstructions ca
re
sure you have all the require
d
y
g
y
a
nd
l
ay
o
ut
a
ll
o
f
th
e
co
mp
o
t t d d t f ll ti ht
use
power
tools
unless
ins
tr

What you need
to assemble the product
Other tools you need
DO NOT USE
18 x Cam Bolts
Ø5 x 45 mm
(H1)
18 x Cam Nuts
Ø14.5 x 11.9 mm
(H2)
75 x Large Bolts
Ø6 x 50 mm
(H3)
67 x Barrel Nuts
Ø9.5 x 11 mm
(H4)
4 x Medium Bolts
Ø6 x 30 mm
(H5)
30 x Small Bolts
Ø6 x 20 mm
(H6)
P1 x 4
Parts list
Box 1:P2,P3,P4,P5,P7,P8,P9,P18,P27,P38,P39,P40,P41,P42
Box 2:P10,P32,P34,P36,P37
Box 3:P1,P12,P13,P14,P15,P16,P17,P19,P22,P23,P24,P25,P26,P28,P29,P33,P35
Box 4:P6,P10,P11,P20,P21,P30,P31
Flat head screwdriver
Phillips head screwdriver
www.fantasticfurniture.com.au PAGE 4
112 x Large Dowels
Ø8 x 30 mm
(H7)
28 x Medium Dowels
Ø8 x 20 mm
(H8)
2 x Small Dowels
Ø6 x 30 mm
(H9)
42 x Large Screws
Ø4 x 25 mm
(H10)
4 x Small Screws
Ø4 x 20 mm
(H11)
View Outside
P2
P3
P4 x 4
P5
P5
P6
P7
P8
P9
P10
P11 P12
P13 x 4
P14
P15
P16
P17
P18
P19
P20
P21
P22
P23
P26
P26
P27
P27
P27
P28
P28
P29x 13 P30
P31
P32
P33
P33
P10
P34
P35
P36
P36 P36 P36 P37
P10
P38
P38
P38
P38
P24
P25
P32
P39 x 4
P40
P42
P41
P11
4 x Bolts
(H12)
P10

www.fantasticfurniture.com.au PAGE 5
QTY
SHAPE
ITEM
NO.
CARTON
NO.
P2
P3
P4
P5
P7
P8
P9
P18
P27
P38
P39
P40
P41
P42
P10
P32
P34
P36
P37
P1
P12
1
1
4
2
1
1
1
1
5
4
4
1
2
1
2
2
1
4
1
4
1
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
2/4
2/4
2/4
2/4
2/4
3/4
3/4
QTY
SHAPE
ITEM
NO.
CARTON
NO.
P14
P15
P16
P17
P19
P22
P23
P24
P25
P26
P28
P29
P33
P35
P6
P10
P11
P20
P21
P30
1
1
1
1
1
1
1
1
1
2
2
13
2
5
1
2
1
1
1
1
P13 83/4
P31 1
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
Step 1
- Unpack cartons,Identify and layout each item below.

PAGE 6
Step 2
www.fantasticfurniture.com.au
- Lay Panels (P2)+(P3) flat as shown.
P2
P3

PAGE 7www.fantasticfurniture.com.au
Step 3
You will need:
Phillips head
screwdriver
- Insert 12 x Medium Dowels (H8) into Panels (P2)&(P3).
- Attach and fix Panels (P4)&(P5) to Panels (P2)&(P3) using 20 x Large Screws (H10) as shown.
12 x Medium Dowels
Ø8 x 20 mm
(H8)
20 x Large Screws
Ø4 x 25 mm
(H10)
P2
P4
P5
P4 P4
P5
P4
H10
H8
H10
H8
P3

PAGE 8www.fantasticfurniture.com.au
Step 4
You will need:
Phillips head
screwdriver
- Screw 4 x Cam Bolts (H1)to Panels (P2) & (P3).
- Insert 20 x Large Dowels (H7) into Panels (P2)&(P3).
4 x Cam Bolts
Ø5 x 45 mm
(H1)
20 x Large Dowels
Ø8 x 30 mm
(H7)
P2
P3
P3
P3
H7
H1
H1
H1
H1
H7
H7
H7
P2
P2

www.fantasticfurniture.com.au
Step 5
- Insert 4 x Medium Dowels (H8) into Panels (P1).
- Screw 4 x Small Bolts (H6) to fix Panels (P1) to Panel (P2).
You will need:
Phillips head
screwdriver
4 x Small Bolts
Ø6 x 20 mm
(H6)
4 x Medium Dowels
Ø8 x 20 mm
(H8)
Step 6
You will need:
Phillips head
screwdriver
4 x Small Bolts
Ø6 x 20 mm
(H6)
4 x Medium Dowels
Ø8 x 20 mm
(H8)
P1
P1
H8
H8
H6
H6
P1
P1
H8
H8
H6
H6
P2
- Insert 4 x Medium Dowels (H8) into Panels (P1).
- Screw 4 x Small Bolts (H6) to fix Panels (P1) to Panel (P3).
PAGE 9
P3

www.fantasticfurniture.com.au
Step 7
- Screw Panel (P6) to Panel (P7) with 2 x Small Bolts(H6).
You will need:
Phillips head
screwdriver
Step 8
You will need:
Phillips head
screwdriver
2 x Small Bolts
Ø6 x 20 mm
(H6)
- Screw 4 x Cam Bolts (H1) to Panels (P8) & (P9).
- Attach Panels (P10) to Panels (P8) & (P9) as shown.
- Insert 4 x Cam Nuts (H2) into Panels (P10)
make sure the arrow is pointing to the hole.
-Turn the Cam Nuts (H2) 90◦clockwise to tighten.
PAGE 10
4 x Cam Bolts
Ø5 x 45 mm
(H1)
4 x Cam Nuts
Ø14.5 x 11.9 mm
(H2)
P8
P9
P10
P10
H2
H2
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then turn
the cam nut so it
tightens over the bolt.
P7
P6
H6

www.fantasticfurniture.com.au
Step 9
- Attach Panels (P9),(P10) to Panel (P2).
- Insert 1 x Cam Nut (H2) into Panel (P10)
make sure the arrow is pointing to the hole.
- Turn the Cam Nut(H2) 90◦clockwise to tighten.
- Remark: Hold Panels (P9)& (P10) to avoid them
from falling to damage the parts or structure until the end of Step 13.
You will need:
Phillips head
screwdriver
Step 10
You will need:
Phillips head
screwdriver
-Attach Panel (P6) to Panel (P2).
-Insert 2 x Barrel Nuts (H4) into Panel (P6).
- Screw 2 x Large Bolts (H3) through Panel (P2) into Barrel Nuts (H4).
- Remark: Adjust position of Barrel Nuts (H4) by Flat head screwdriver if necessary.
Hold Panel (P6) to avoid them from falling to damage the parts
or structure until the end of Step 13.
PAGE 11
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then turn
the cam nut so it
tightens over the bolt.
2 x Large Bolts
Ø6 x 50 mm
(H3)
2 x Barrel Nuts
Ø9.5 x 11 mm
(H4)
P2
P6
H3
H4
Flat head
screwdriver
P6 P2
1 x Cam Nuts
Ø14.5 x 11.9 mm
(H2)
P9
P10
P2
H2
P10
H1
P2

www.fantasticfurniture.com.au
Step 11
-Attach Panels (P8),(P10) to Panel (P2).
-Insert 1 x Cam Nut (H2) into Panel (P10)
make sure the arrow is pointing to the hole.
-Turn the Cam Nut(H2) 90◦clockwise to tighten.
-Remark:Hold Panels (P8)&(P10) to avoid them from
falling to damage the parts or structure until the end of Step 13.
You will need:
Phillips head
screwdriver
Step 12
You will need:
Phillips head
screwdriver
- Attach Panel (P11) to Panel (P2).
- Insert 2 x Barrel Nuts (H4) into Panel (P11).
- Screw 2 x Large Bolts (H3) through Panel (P2) into Barrel Nuts (H4)
- Remark: Adjust position of Barrel Nuts (H4) by Flat head screwdriver if necessary.
Hold Panel(P11) to avoid them from falling to damage the parts
or structure until the end of Step 13.
PAGE 12
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then turn
the cam nut so it
tightens over the bolt.
2 x Large Bolts
Ø6 x 50 mm
(H3)
2 x Barrel Nuts
Ø9.5 x 11 mm
(H4)
Flat head
screwdriver
1 x Cam Nuts
Ø14.5 x 11.9 mm
(H2)
P2
P11
P11
P2
H3
H4
P2
P8
P10
P2
P8
P10
H2
H1

www.fantasticfurniture.com.au
Step 13
- Attach Panels (P8),(P10),(P11) to Panel (P3) as shown.
- Attach Panels (P6),(P9),(P10) to Panel (P3) as shown.
- Insert 2 x Cam Nuts (H2) into Panels (P10) make sure the arrow is pointing to the hole,
turn the Cam Nut (H2) 90◦ clockwise to tighten.
- Insert 4 x Barrel Nuts (H4) into Panels (P6)&(P11).
- Screw 4 x Large Bolts (H3) through Panel (P3) into Barrel Nuts in Panels (P6) & (P11).
- Remark: Adjust position of Barrel Nuts (H4) using Flat head screwdriver if necessary.
You will need:
Phillips head
screwdriver
PAGE 13
4 x Large Bolts
Ø6 x 50 mm
(H3)
4 x Barrel Nuts
Ø9.5 x 11 mm
(H4)
Flat head
screwdriver
2 x Cam Nuts
Ø14.5 x 11.9 mm
(H2)
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then turn
the cam nut so it
tightens over the bolt.
P10
P8
P11
P6
P9
P10
P3
H3
H3
H4
H4
H2
H2
P6
P10
P3
P3
P11
P10

www.fantasticfurniture.com.au
Step 14
- Insert 4 x Large Dowels (H7) into Panel (P15).
- Attach and fix Panels (P15),(P13) to Panel (P16)
using 4 x Large Bolts (H3) as shown.
You will need:
Phillips head
screwdriver
PAGE 14
4 x Large Bolts
Ø6 x 50 mm
(H3)
4 x Large Dowels
Ø8 x 30 mm
(H7)
P15
P13
P16
H3
H7
Step 15
You will need:
Phillips head
screwdriver
10 x Large Bolts
Ø6 x 50 mm
(H3)
4 x Large Dowels
Ø8 x 30 mm
(H7)
- Insert 4 x Large Dowels (H7) into Panels (P6).
- Attach and fix Panels (P15)&(P16) to Panels (P2),(P3),(P6).
- Insert 10 x Barrel Nuts (H4) into Panels (P15)&(P16).
- Screw 10 x Large Bolts (H3) through Panel (P6) into Barrel Nuts (H4) in Panels (P15)&(P16).
- Remark: Adjust position of Barrel Nuts (H4) by Flat head screwdriver
if necessary.
10 x Barrel Nuts
Ø9.5 x 11 mm
(H4)
P2
P6 P3
P16
P15
P6
P16
P16
P15
P2
P3
View Inside
H3
H4
H7
P6
H4
H3

You will need:
Phillips head
screwdriver
2 x Small Dowels
Ø6 x 30 mm
(H9)
4 x Small Screws
Ø4 x 20 mm
(H11)
P15
P16
P17
P17
H11
H9
- Insert 2 x Small Dowels (H9) into Panels (P15)&(P16).
- Attach and fix Panel (P17) to Panels (P15)&(P16)
using 4 x Small Screws (H11) as shown.
www.fantasticfurniture.com.au
Step 16
PAGE 15
Step 17
- Insert 4 x Large Dowels (H7) into Panel (P12).
- Attach and fix Panels (P13)&(P14) to Panel (P12) using
4 x Large Bolts (H3) as shown.
You will need:
Phillips head
screwdriver
4 x Large Bolts
Ø6 x 50 mm
(H3)
4 x Large Dowels
Ø8 x 30 mm
(H7)
P12
P13
P14
H7
H11

www.fantasticfurniture.com.au PAGE 16
Step 18
You will need:
Phillips head
screwdriver
10 x Large Bolts
Ø6 x 50 mm
(H3)
4 x Large Dowels
Ø8 x 30 mm
(H7)
10 x Barrel Nuts
Ø9.5 x 11 mm
(H4)
P2
P12
P14
P11
H7
P12
P14
P14
P12
H3
H4
H3
P11
P3
View Inside
- Insert 4 x Large Dowels (H7) into Panels (P11).
- Attach and fix Panels (P12)&(P14) to Panels (P2),(P3),(P11).
- Insert 10 x Barrel Nuts (H4) into Panels (P12)&(P14).
- Screw 10 x Large Bolts (H3) through Panel (P11) into Barrel Nuts (H4) in Panels (P12)&(P14).
- Remark: Adjust position of Barrel Nuts (H4) by Flat head screwdriver if necessary.
P11

www.fantasticfurniture.com.au
Step 19
- Screw 2 x Cam Bolts (H1) to Panel (P18).
You will need:
Phillips head
screwdriver
PAGE 17
Step 20
You will need:
Phillips head
screwdriver
2 x Cam Bolts
Ø5 x 45 mm
(H1) P18
H1
2 x Cam Nuts
Ø14.5 x 11.9 mm
(H2)
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then turn
the cam nut so it
tightens over the bolt.
P18
P6
P18
P6
H2
-Attach Panel (P18) to Panel (P6).
-Insert 2 x Cam Nut (H2) into Panel (P6) make sure the arrow is pointing to the hole.
Turn the Cam Nut (H2) 90◦clockwise to tighten.

www.fantasticfurniture.com.au
Step 21
You will need:
Phillips head
screwdriver
PAGE 18
- Insert 5 x Panels (P27) into the gaps of Panels (P4) & (P5).
- Screw tight with 10 x Large Screws (H10).
10 x Large Screws
Ø4 x 25 mm
(H10) P5
H10
P27
P4 P4
P4
P4
P5
P5
P27
P27
P27
H10
P5

www.fantasticfurniture.com.au
Step 22
You will need:
Phillips head
screwdriver
PAGE 19
- Insert 2 x Panels (P28) into the gaps of Panels (P27).
- Screw tight with 2 x Large Screws (H10) in the middle of the bed .
2 x Large Screws
Ø4 x 25 mm
(H10) P27
P28
P27
P28
H10
P28
P28
Step 23
You will need:
Phillips head
screwdriver
3 x Large Bolts
Ø6 x 50 mm
(H3)
2 x Large Dowels
Ø8 x 30 mm
(H7)
3 x Barrel Nuts
Ø9.5 x 11 mm
(H4)
P20
P19 P19
P20
H3
H7
H4
- Insert 2 x Large Dowels (H7) into Panel (P19).
- Attach Panel (P19) to Panel (P20).
- Insert 3 x Barrel Nuts (H4) into Panel (P19).
- Screw 3 x Large Bolts(H3) through Panel (P20) into Barrel Nuts (H4) in Panel (P19).
- Remark: Adjust position of Barrel Nuts (H4) by Flat head screwdriver if necessary.
Flat head
screwdriver

www.fantasticfurniture.com.au
Step 24
PAGE 20
- Insert 2 x Large Dowels (H7) into Panel (P20).
-Attach Panel (P24) to Panel (P20).
- Insert 2 x Barrel Nuts (H4) into Panel (P20).
- Screw 2 x Large Bolts (H3) through Panels (P24) into Barrel Nuts (H4) in Panel (P20).
- Remark: Adjust position of Barrel Nuts (H4) by Flat head screwdriver if necessary.
Step 25
You will need:
Phillips head
screwdriver
2 x Large Bolts
Ø6 x 50 mm
(H3)
2 x Large Dowels
Ø8 x 30 mm
(H7)
2 x Barrel Nuts
Ø9.5 x 11 mm
(H4)
You will need:
Phillips head
screwdriver
2 x Large Bolts
Ø6 x 50 mm
(H3)
2 x Large Dowels
Ø8 x 30 mm
(H7)
2 x Barrel Nuts
Ø9.5 x 11 mm
(H4)
P20
P24
P24
P20
H3
H3
H7
H7
H4
P20
P25
H3
H4
H7
Flat head
screwdriver
Flat head
screwdriver
- Insert 2 x Large Dowels (H7) into Panel (P20).
-Attach Panel (P25) to Panel (P20).
- Insert 2 x Barrel Nuts (H4) into Panel (P20).
- Screw 2 x Large Bolts (H3) through Panels (P25) into Barrel Nuts (H4) in Panel (P20).
- Remark: Adjust position of Barrel Nuts (H4) by Flat head screwdriver if necessary.
H3
P25
P20
H4