fantastic furniture Venus User manual

Venus
Bed Single Pink
fantasticfurniture.com.au
Version 1.0

Page 2
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
fantasticfurniture.com.au

Assembly checklist
Useful information
Read through the instructionscarefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used as they may not fit through a door once assembled.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.
Page 3fantasticfurniture.com.au

What you need
to assemble the product
Other tools you need:
Phillipshead screwdriver;
Hardware pack
Parts list
Headboard (P1);
Headboard (P1)
Footboard (P2);
Footboard (P2)
Left Side Rail (P3/L);
Right Side Rail (P3/R);
Right Side Rail (P3/R)
Left Side Rail (P3/L)
Slats (P5);
Slats (P5)
4 x Wooden Legs (P4);
Wooden Leg (P4)
Wooden Leg (P4)
Wooden Leg (P4)
Wooden Leg (P4)
48 x Screws
(H2)
16 x
Bolts
(H1)
1 x Allen
Key
(H3)
Page 4fantasticfurniture.com.au
4 x Brackets
(H4)

1 x Allen Key
(H3)
4 x Brackets
(H4)
Step 1
Step 2
(P4)
(P4)
(P4)
(P4)
(P1)
(P2)
Page 5
fantasticfurniture.com.au
You will need
4 x Wooden Legs
(P4)
You will need
8 x Bolts
(H1)
(P3)
(H3)
(H1)
(H4)
(H1)
Attach 2 x legs (P6) to the bottom of the
headboard (P1) and footboard (P2).
Rotate the legs (P4) anti-clockwise until they
are fully tightened.
Attach the 4 x brackets (H4) to the ends of the side rails (P3) as shown.
Screw in 2 x bolts (H1) into each bracket with the allen key (H3).
Ensure to fully tighten all bolts.
(P3)

Step 4
Page 6
fantasticfurniture.com.au
1 x Allen Key
(H3)
You will need
8 x Bolts
(H1)
(H3)
(H1)
(P1)
(H1)
(H4)
(P1)
(P3/L)
(P2)
(P3/R)
Then attach the side rails (P3/L, P3/R) to the headboard
(P1) over the bolts (H1) as shown.
Then attach the side rails (P3/L, P3/R) to the footboard
(P2) over the bolts (H1).
Make sure the inner space of the bed is square.
Now fully tighten all bolts (H1) on brackets with the allen
key (H3).
(P3)
(P3)
1 x Allen Key
(H3)
You will need
8 x Bolts
(H1)
(H1)
(P1)
(P1)
(H3)
(H1) (P2)
(H1)
(H4)
(P3)
(P2)
(P3)
Step 3
(H3)
(H1)
(P1)/(P2)
(H1)
Install 4 x bolts (H1) into the
headboard (P1) and footboard
(P2) by using
the allen key (H2) as shown, do
not fully tighten the bolts and
keep them 8mm loose.
(P1)
(P2)
8mm
8mm

Step 5
Step 6
Page 7
fantasticfurniture.com.au
You will need
Phillips head
screwdriver
48 x Screws
(H2)
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.
(H2)
(H2)
(P5)
Attach the 12 x slats (P5) to the side rails
(P3) with 48 x screws (H2) using a phillips
head screwdrver.